Welcome to LookChem.com Sign In|Join Free

CAS

  • or

12008-04-7

Post Buying Request

12008-04-7 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

12008-04-7 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 12008-04-7 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 1,2,0,0 and 8 respectively; the second part has 2 digits, 0 and 4 respectively.
Calculate Digit Verification of CAS Registry Number 12008-04:
(7*1)+(6*2)+(5*0)+(4*0)+(3*8)+(2*0)+(1*4)=47
47 % 10 = 7
So 12008-04-7 is a valid CAS Registry Number.
InChI:InChI=1/6B.Dy/rB6Dy/c1-7(2,3,4,5)6

12008-04-7SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 19, 2017

Revision Date: Aug 19, 2017

1.Identification

1.1 GHS Product identifier

Product name DYSPROSIUM BORIDE

1.2 Other means of identification

Product number -
Other names -

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:12008-04-7 SDS

12008-04-7Upstream product

12008-04-7Downstream Products

12008-04-7Relevant articles and documents

The ternary RE-Si-B systems (RE = Dy, Ho, Er and Y) at 1270 K: Solid state phase equilibria and magnetic properties of the solid solution REB2-xSix (RE = Dy and Ho)

Roger, Jérome,Babizhetskyy, Volodymyr,Guizouarn, Thierry,Hiebl, Kurt,Guérin, Roland,Halet, Jean-Fran?ois

, p. 72 - 84 (2006)

The solid state phase equilibria in the ternary RE-Si-B diagrams (RE = Dy, Ho, Er and Y) were determined at 1270 K using experimental techniques such as X-ray diffraction, scanning electron microscopy and electron probe microanalysis. In general, three ternary phases were obtained for each diagram: the line compound RE5Si2B8 with tetragonal symmetry, the boron-inserted Nowotny phase RE5Si3Bx of Mn5Si3-type and the solid solution REB2-xSix of AlB2-type. Prior to this work, the binary systems RE-Si and RE-B, which form the boundary of each diagram, were also re-investigated. In addition to the structures of RE5Si3 (Mn5Si3-type, RE = Dy, Ho and Y) and Dy3Si4 (Ho3Si4-type) which were previously reported or will be presented in a forthcoming paper, the X-ray single crystal structures of RE5Si4 (Sm5Ge4-type, RE = Dy and Ho), DySi (CrB-type) and HoSi in both polymorphic modifications, i.e. the FeB- (high temperature) and CrB- (low temperature) types, were determined and are described herein. Structural relationships between members of the same series on one side, and between both forms of HoSi on the other side, are also discussed in terms of coordination polyhedra and interatomic distances. Finally, magnetic measurements were performed on the alloys REB2-xSix, which in case of RE = Dy exhibit a marked increase of the magneto-crystalline anisotropy, whereas for RE = Ho a change from ferromagnetic to antiferromagnetic behaviour with increasing silicon content is encountered.

Single Crystal Growth and Properties of Incongruently Melting TbB6, DyB6, HoB6, and YB6

Takahashi,Kunii

, p. 198 - 200 (1997)

Details of the single crystal growth of incongruently melting TbB6, DyB6, HoB6, and YB6using a crucible-free vertical floating zone method are reported. Magnetic susceptibility is reported and discussed. It is suggested that antiferro-quadrupolar ordering occurs in DyB6between 30 and 25.6 K.

Thermodynamic functions for heavy rare-earth hexaborides as measured by calorimetry in the temperature range from 5 to 300 K

Sirota,Novikov,Vinokurov

, p. 1722 - 1725 (2007/10/03)

The molar heat capacities of gadolinium, terbium, and dysprosium hexaborides were measured over the temperature range 5-300 K. The temperature dependences and the standard values of the enthalpy, entropy, and the Gibbs energy were calculated by taking into account the nuclear contribution to the heat capacity.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 12008-04-7