12060-00-3

Basic information

• Product Name: LEAD TITANIUM OXIDE
• Synonyms: LEAD TITANATE, POWDER, ;LEAD TITANATE, 99.9%;Lead(II)titanate,99.5%;Lead titanium oxide (PbTiO3);Lead titanium oxide, 99.9% (metals basis);Lead titanium oxide, 99.5%;Lead titanium oxide, polymeric precursor, oxide >30 wt%;Lead titanate(IV)
• CAS NO: 12060-00-3
• Molecular Formula: O3PbTi
• Molecular Weight: 303.07
• EINECS: 235-038-9
• Product Categories: Inorganics;Ceramics;Metal and Ceramic Science;Titanates;metal titanate
• Mol File: 12060-00-3.mol
• Article Data: 2

Chemical Properties

• Flash Point: 12°(54°F)
• Appearance: Yellow/powder
• Density: 7.52 g/mL at 25 °C(lit.)
• Refractive Index: 2.66
• Solubility: Soluble in alcohols
• Water Solubility: Insoluble in water.
• Sensitive: Moisture Sensitive
• CAS DataBase Reference: LEAD TITANIUM OXIDE(CAS DataBase Reference)
• NIST Chemistry Reference: LEAD TITANIUM OXIDE(12060-00-3)
• EPA Substance Registry System: LEAD TITANIUM OXIDE(12060-00-3)

Safety Data

• Hazard Codes: Xn,N,T
• Statements: 20-62-50/53-33-20/22-61
• Safety Statements: 22-26-28-36/37/39-45-61-60-53
• RIDADR: 2291
• WGK Germany: 2
• RTECS: XR1575000
• TSCA: Yes
• HazardClass: 3
• PackingGroup: III
• Hazardous Substances Data: 12060-00-3(Hazardous Substances Data)

Usage

Chemical Properties

yellow tetr crystal(s) <490°C, cub >490°C; can be made by calcination of stoichiometric amounts of PbO and TiO2 at 400°C; also prepared by precipitation from aqueous solution of lead nitrate, titanium tetrachloride, and ammonium hydroxide, followed by calcining at 900°C; has been used as a paint pigment; and in 99.9% purity as a sputtering target for thin film capacitors [KIR78] [KIR83] [STR93] [CER91] [SAF87]

Uses

Different sources of media describe the Uses of 12060-00-3 differently. You can refer to the following data:
1. Lead titanate (lead metatitanate), PbTiO3, forms yellow tetragonal crystals below 490 °C and cubic crystals above 490 °C. It is insoluble in water. In hydrochloric acid, lead titanate decomposes into PbCl2 and TiO2. It can be formed by calcining an equimolecular mixture of lead monoxide and titanium dioxide and has been used in surface coatings as a pigment in outdoor paints, as a component of ceramic electrical insulators, in ceramic ferroelectric-piezoelectric compositions, in ceramic electrical capacitors, in ceramic glazes, in transducers, in low melting glass sealants, and in oxidation catalysts for manufacturing acrylonitrile from propylene and nitrous oxide.
2. Lead(II) titanium oxide is widely used in ceramic capacitor, ceramic filters, PTC thermal resistor, pressure sensitive resistor and the performance of transducer field.

Flammability and Explosibility

Nonflammable

InChI:InChI=1/4O.Pb.Ti/q4*-1;+4;/rO4Ti.Pb/c1-5(2,3)4;/q-4;+4

Upstream product

• 6080-56-4 lead(II) acetate trihydrate 
• 5593-70-4 titanium (IV) butoxide 

Relevant articles and documents

Rietveld analysis of the structure of Pb1-xTix O1+x by neutron diffraction

The Rietveld neutron powder profile analysis of Pb1-xTixO1+x is reported. The structure is similar to the ∝-PbO one (P 4/nmm; Z=2). A contraction of the cell parameters is observed when substituting titanium for lead. The