An alloy that is exposed to cavitation may experience mechanical cavitation damages as well as accelerated corrosion. In the present paper, the evolution of corrosion erosion behavior of brass samples (CuZn38Pb3) during continuous exposure to ultrasonic cavitation in a salt solution (NaCl) was i...detailed
This work investigates the formation mechanism of the third bodies for brass under lubricated conditions. A tribometer based on on-line and radio-nuclide technique (RNT) techniques is used to perform the sliding experiment of brass versus steel. The microstructure, micro-hardness and chemical co...detailed
Commercial brass OT60 is commonly used for food processing. The inhibition of its dezincification in presence of the biofilm forming Pseudomonas fluorescens was documented in this work. Electrochemical polarizations, Electrochemical Impedance Spectroscopy and post treatment analyses were carried...detailed
This paper is concerned with the effect of laser shock peening on micro-hardness and microstructure of brass. In order to study the plastic deformation behaviors of brass, laser shock peening with 1, 2, and 3 impacts at pulse energy of 6.5 J were performed in this experiment respectively. The mi...detailed
This article describes frictional and electrical contact behaviors of electroplated brass under fretting conditions. Fretting tests using a crossed cylinder configuration are conducted. Cylindrical-type specimens are made of tin-plated and gold-plated brass. The ratio of the maximum tangential f...detailed
The accelerated corrosion behavior of copper T2 and brass H62 exposed in simulated Nansha marine atmosphere for different periods were investigated by weight loss method, SEM, XRD and potentiodynamic polarization measurements. The results indicate that copper T2 and brass H62 underwent severe co...detailed
This paper is focused on the synthesis of brass–AlN composite based on powder metallurgy technique. By varying the weight percentages (0, 4, 8, 12) of aluminium nitride (AlN) as reinforcement. The high energy ball milling are used the brass-AlN composite. The green cylindrical compacts were pro...detailed
The leaded brasses show high machinability and atmospheric corrosion resistance. Hence, they are being used in different applications such as machine parts, valves, fittings etc. Besides, they can serve as radiation shields as they contain lead and their radiation shielding properties were not i...detailed
This paper presents the failure analysis of the lead-free brass valve bodies that had been installed in plumbing sanitary equipment. Leakage points were found adjacent to the brazing location. Visual inspection, stereomicroscope and scanning electron microscopy coupled with an energy dispersive ...detailed