Welcome to LookChem.com Sign In|Join Free
  • or
METOLACHLOR DESCHLORO is a chemical with a specific purpose. Lookchem provides you with multiple data and supplier information of this chemical.

126605-22-9

Post Buying Request

126605-22-9 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

126605-22-9 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 126605-22-9 includes 9 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 6 digits, 1,2,6,6,0 and 5 respectively; the second part has 2 digits, 2 and 2 respectively.
Calculate Digit Verification of CAS Registry Number 126605-22:
(8*1)+(7*2)+(6*6)+(5*6)+(4*0)+(3*5)+(2*2)+(1*2)=109
109 % 10 = 9
So 126605-22-9 is a valid CAS Registry Number.

126605-22-9SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 19, 2017

Revision Date: Aug 19, 2017

1.Identification

1.1 GHS Product identifier

Product name N-(2-ethyl-6-methylphenyl)-N-(1-methoxypropan-2-yl)acetamide

1.2 Other means of identification

Product number -
Other names METOLACHLOR DESCHLORO

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:126605-22-9 SDS

126605-22-9Downstream Products

126605-22-9Relevant academic research and scientific papers

Catalytic intramolecular participation of amide group in the acid hydrolysis of methyl ether linkage

Arcelli, Antonio,Porzi, Gianni,Sandri, Sergio

, p. 9729 - 9736 (1995)

Evidence for the acid catalyzed hydrolysis or methyl ether linkage assisted by the neighboring amide function was obtained. The hydrolysis rate of 1 to 3 was measured at least 1.7 x 103 fold higher than that of the reference compound 5. The values of thermodynamic parameters suggest that the participation of neighboring amide group in 1 is accompanied by a lower activation enthalphy with respect to the unassisted reaction in 5. Experimental evidence, such as the kinetic isotope ratio, the positive Φ value of Bunnett-Olsen equation and ΔS++ value suggests an A2 mechanism.

Dechlorination of the chloroacetanilide herbicides alachlor and metolachlor by iron metal

Eykholt, Gerald R.,Davenport, Douglas T.

, p. 1482 - 1487 (1998)

Granular iron metal has been found to cause the reductive dechlorination of two important chloroacetanilide herbicides, alachlor and metolachlor. Aqueous solutions (113 mL) of the herbicides were contacted with 40 g of granular cast iron (CCI coarse, 40 mesh) with mild agitation at room temperature. First-order degradation rate constants were 0.12 and 0.10 h-1 for 10 mg/L solutions of alachlor and metolachlor, respectively. A two-site, rate-limited sorption and first-order degradation model was applied to both batch data sets, with excellent agreement for alachlor and fair agreement for metolachlor. The products of the reaction were chloride (84% mass balance for alachlor and 68% for metolachlor) and dechlorinated acetanilides. Supported by GC/EIMS analysis, two sequential reactions may have occurred for alachlor, hydrogenolysis of the chloroacetyl group followed by an N-dealkylation reaction. However, only one product was confirmed by GC/FID, and the mechanism for the N-dealkylation reaction is unknown. Metolachlor was found to produce one dechlorinated product consistent with hydrogenolysis. These results are encouraging, as granular iron may be used at spill sites contaminated with these herbicides and related compounds. Granular iron metal has been found to cause the reductive dechlorination of two important chloroacetanilide herbicides, alachlor and metolachlor. Aqueous solutions (113 mL) of the herbicides were contacted with 40 g of granular cast iron (CCI coarse, 40 mesh) with mild agitation at room temperature. First-order degradation rate constants were 0.12 and 0.10 h-1 for 10 mg/L solutions of alachlor and metolachlor, respectively. A two-site, rate-limited sorption and first-order degradation model was applied to both batch data sets, with excellent agreement for alachlor and fair agreement for metolachlor. The products of the reaction were chloride (84% mass balance for alachlor and 68% for metolachlor) and dechlorinated acetanilides. Supported by GC/EIMS analysis, two sequential reactions may have occurred for alachlor, hydrogenolysis of the chloroacetyl group followed by an N-dealkylation reaction. However, only one product was confirmed by GC/FID, and the mechanism for the N-dealkylation reaction is unknown. Metolachlor was found to produce one dechlorinated product consistent with hydrogenolysis. These results are encouraging, as granular iron may be used at spill sites contaminated with these herbicides and related compounds.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 126605-22-9