14260-97-0 Usage
Uses
Used in Biological Studies:
Bis(2-butoxyethyl) hydrogen phosphate is used as a research compound for studying the metabolism of phosphate flame retardants and plasticizers in human liver fractions. This application is crucial for understanding the biotransformation processes and potential health implications of these chemicals in humans.
Used in Flame Retardants Industry:
Bis(2-butoxyethyl) hydrogen phosphate is used as an additive in the flame retardants industry to enhance the fire resistance of various materials. Its incorporation into products helps to slow down the spread of fire, providing additional safety measures.
Used in Plastics Industry:
In the plastics industry, bis(2-butoxyethyl) hydrogen phosphate is used as a plasticizer to improve the flexibility, workability, and durability of plastic materials. Its addition to the manufacturing process results in plastics with enhanced physical properties, making them more suitable for various applications.
Check Digit Verification of cas no
The CAS Registry Mumber 14260-97-0 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 1,4,2,6 and 0 respectively; the second part has 2 digits, 9 and 7 respectively.
Calculate Digit Verification of CAS Registry Number 14260-97:
(7*1)+(6*4)+(5*2)+(4*6)+(3*0)+(2*9)+(1*7)=90
90 % 10 = 0
So 14260-97-0 is a valid CAS Registry Number.
InChI:InChI=1/C12H27O6P/c1-3-5-7-15-9-11-17-19(13,14)18-12-10-16-8-6-4-2/h3-12H2,1-2H3,(H,13,14)
14260-97-0Relevant academic research and scientific papers
PHOSPHORUS-BASED RELEASING AGENT, OPTICAL POLYMERIZABLE COMPOSITION COMPRISING SAME AND PREPARATION THEREOF
-
Paragraph 0066; 0070, (2019/09/06)
Embodiments relate to a polymerizable composition comprising a phosphorus-based mold releasing agent for an optical use whose preparation process is improved, and a process for preparing the phosphorus-based mold releasing agent. The phosphorus-based mold releasing agents can be prepared more easily and conveniently by using phosphorous pentoxide, which can easily react with a monoalcohol and/or water at room temperature in the absence of a catalyst or a solvent. In addition, byproducts are not generated during the reaction. Thus, when a lens is produced by using the mold release agent obtained therefrom, it is possible to prevent a defective appearance of the lens that may be caused by byproducts, thereby further enhancing the appearance properties thereof. Further, since separate steps for removing byproducts, specifically, such steps as washing and filtration, are not required, wastewater is not generated. Thus, it is not only environmentally friendly, but the production cost can also be reduced as the process is simple.
