29587-91-5Relevant academic research and scientific papers
Epoxidation of Cyclooctene Using Water as the Oxygen Atom Source at Manganese Oxide Electrocatalysts
Jin, Kyoungsuk,Maalouf, Joseph H.,Lazouski, Nikifar,Corbin, Nathan,Yang, Dengtao,Manthiram, Karthish
, p. 6413 - 6418 (2019)
Epoxides are useful intermediates for the manufacture of a diverse set of chemical products. Current routes of olefin epoxidation either involve hazardous reagents or generate stoichiometric side products, leading to challenges in separation and significant waste streams. Here, we demonstrate a sustainable and safe route to epoxidize olefin substrates using water as the oxygen atom source at room temperature and ambient pressure. Manganese oxide nanoparticles (NPs) are shown to catalyze cyclooctene epoxidation with Faradaic efficiencies above 30%. Isotopic studies and detailed product analysis reveal an overall reaction in which water and cyclooctene are converted to cyclooctene oxide and hydrogen. Electrokinetic studies provide insights into the mechanism of olefin epoxidation, including an approximate first-order dependence on the substrate and water and a rate-determining step which involves the first electron transfer. We demonstrate that this new route can also achieve a cyclooctene conversion of ～50% over 4 h.
Organocatalytic epoxidation and allylic oxidation of alkenes by molecular oxygen
Orfanidou, Maria,Petsi, Marina,Zografos, Alexandros L.
supporting information, p. 9172 - 9178 (2021/11/30)
Pyrrole-proline diketopiperazine (DKP) acts as an efficient mediator for the reduction of dioxygen by Hantzsch ester under mild conditions to allow the aerobic metal-free epoxidation of electron-rich alkenes. Mechanistic crossovers are underlined, explaining the dual role of Hantzsch ester as a reductant/promoter of the DKP catalyst and a simultaneous competitor for the epoxidation of alkenes when HFIP is used as a solvent. Expansion of this protocol to the synthesis of allylic alcohols was achieved by adding a catalytic amount of selenium dioxide as an additive, revealing a superior method to the classical application of t-BuOOH as a selenium dioxide oxidant.
Modification of MnFe2O4 surface by Mo (VI) pyridylimine complex as an efficient nanocatalyst for (ep)oxidation of alkenes and sulfides
Bouzari, Narges,Bezaatpour, Abolfazl,Babaei, Behnam,Amiri, Mandana,Boukherroub, Rabah,Szunerits, Sabine
, (2021/03/04)
In this current paper, we report a new type of heterogeneous molybdenum (+6) complex, prepared by covalent grafting of cis-dioxo?molybdenum (VI) pyridylimine complex on the surface of MnFe2O4 nanoparticles (NP) and characterized using various physicochemical techniques. The recyclable prepared nanocatalyst was tested for sulfoxidation of sulfides and epoxidation of alkenes under solvent-free condition. The catalyst exhibited high turnover frequency for the oxidization of cyclooctene and cyclohexene (10,850 h?1) and thioanisole and dimethyl sulfide (41,250 h?1). The synthesized catalyst was found highly efficient, retrievable and eco-friendly catalyst for the (ep)oxidation of alkenes and sulfides in excellent yields in a short time. Furthermore, the synthesized nanocatalyst can be reused for four runs without apparent loss of its catalytic activity in the oxidation reaction.
Titanosilicate beads with hierarchical porosity: Synthesis and application as epoxidation catalysts
Lin, Kaifeng,Lebedev, Oleg I.,Vana Tendeloo, Gustaaf,Jacobs, Pierre A.,Pescarmona, Paolo P.
experimental part, p. 13509 - 13518 (2011/03/17)
Porous titanosilicate beads with a diameter of 0.5-1.5a mm (TiSil-HPB-60) were synthesized from a preformed titanosilicate solution with a porous anion-exchange resin as template. The bead format of this material enables its straightforward separation from the reaction mixture in its application as a liquid-phase heterogeneous catalyst. The material displays hierarchical porosity (micro/mesopores) and incipient TS-1 structure building units. The titanium species are predominantly located in tetrahedral framework positions. TiSil-HPB-60 is a highly active catalyst for the epoxidation of cyclohexene with t-butyl hydroperoxide (TBHP) and aqueous H2O2. With both oxidants, TiSil-HPB-60 gave higher epoxide yields than Ti-MCM-41 and TS-1. The improved catalytic performance of TiSil-HPB-60 is mainly ascribed to the large mesopores favoring the diffusion of reagents and products to and from the titanium active sites. The epoxide yield and selectivity could be further improved by silylation of the titanosilicate beads. Importantly, TiSil-HPB-60 is a stable catalyst immune to titanium leaching, and can be easily recovered and reused in successive catalytic cycles without significant loss of activity. Moreover, TiSil-HPB-60 is active and selective in the epoxidation of a wide range of bulky alkenes. Beads for catalysis: Titanosilicate beads with hierarchical porosity (see figure) displayed improved catalytic behavior in the epoxidation of cyclohexene with tert-butyl hydroperoxide and H2O 2 relative to TS-1 and Ti-MCM-41. The bead format of the material enables a straightforward separation of the catalyst from the reaction solutions. Copyright
