30746-58-8

Usage

Uses

Used in Environmental Testing and Research:
1,2,3,4-Tetrachlorodibenzo-p-dioxin is used as a standard for environmental testing and research to assess the impact of polychlorinated dibenzo-p-dioxins in the environment. It helps in understanding the presence and effects of these pollutants, which can be released from various sources such as waste incineration plant emissions.
Used in Industrial Emission Monitoring:
TCDD is used as a reference compound in monitoring and controlling the emissions from industrial processes, particularly those involving waste incineration. By measuring the levels of TCDD in emissions, industries can take necessary steps to reduce the release of these harmful pollutants into the environment.
Used in Toxicological Studies:
1,2,3,4-Tetrachlorodibenzo-p-dioxin is utilized in toxicological research to study its effects on human health and the environment. This helps in developing strategies to mitigate the risks associated with exposure to these toxic compounds and to establish safety standards for human exposure.
Used in Regulatory Compliance:
TCDD is used as a benchmark in regulatory frameworks to ensure compliance with environmental protection standards. By monitoring the levels of TCDD in the environment and industrial emissions, regulatory bodies can enforce strict controls on the release of these pollutants, thereby protecting public health and the environment.

Air & Water Reactions

Insoluble in water.

Reactivity Profile

This type of compound is extremely stable, even on heating to 1292° F. Solutions of this type of chemical in methanol are degraded by exposure to summer sunlight or irradiation with an ultraviolet lamp (300 nm). .

Fire Hazard

Flash point data for 1,2,3,4-TETRACHLORODIBENZO-P-DIOXIN are not available; however, 1,2,3,4-TETRACHLORODIBENZO-P-DIOXIN is probably combustible.

InChI:InChI=1/C12H4Cl4O2/c13-7-8(14)10(16)12-11(9(7)15)17-5-3-1-2-4-6(5)18-12/h1-4H

Upstream product

• 74-86-2 acetylene 

Relevant academic research and scientific papers

Role of copper chloride in the formation of polychlorinated dibenzo-p-dioxins and dibenzofurans during incineration

Combustion experiments in a laboratory-scale fluidized-bed reactor were performed to elucidate the role of copper chloride in formation of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) during model waste incineration. The amounts of PCDDs and PCDFs formed, the homologue profiles, and the isomer distributions were measured in the flue gas from incineration of model wastes containing various levels of copper. A correlation was found between the Cu content of the waste and the proportion of each congener. An increase in copper enhanced the formation of certain congeners, showing that copper acts as a catalyst for formation of PCDDs and PCDFs. An increase in the copper content of the waste decreased the CO concentration in the flue gas and reduced the formation of PCDDs and PCDFs during incineration. This indicates that copper also works as an oxidation catalyst to promote combustion, leading to lower concentrations of products of incomplete combustion. It is indispensable to consider both roles of the catalyst, i.e., enhancement and suppression, in the formation of PCDDs and PCDFs during waste incineration, which are estimated separately from the isomer distributions and the amounts of PCDDs and PCDFs formed.

Copper-catalyzed chlorination and condensation of acetylene and dichloroacetylene

The chlorination and condensation of acetylene at low temperatures is demonstrated using copper chlorides as chlorinated agents coated to model borosilicate surfaces. Experiments with and without both a chlorine source and borosilicate surfaces indicate the absence of gas-phase and gas-surface reactions. Chlorination and condensation occur only in the presence of the copper catalyst. C2 through C8 organic products were observed in the effluent; PCDD/F were only observed from extraction of the borosilicate surfaces. A global reaction model is proposed that is consistent with the observed product distributions. Similar experiments with dichloroacetylene indicate greater reactivity in the absence of the copper catalyst. Reaction is observed in the gas-phase and in the presence of borosilicate surfaces at low temperatures. The formation of hexachlorobenzene is only observed in the presence of a copper catalyst. PCDD/F were only observed from extraction of the borosilicate surfaces. A global reaction model is proposed for the formation of hexachlorobenzene from dichloroacetylene. (C) 2000 Elsevier Science Ltd.

Isomer distributions of polychlorinated dibenzo-p-dioxins/dibenzofurans formed during de novo synthesis on incinerator fly ash

Polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) emitted from municipal waste incinerators appear to have a chlorination pattern that is quite constant across various samples and conditions. This suggested that these patterns may be controlled by thermodynamic properties of the individual PCDD/F congeners, such as the free Gibbs energy of formation (Δg°(f,T)). This would make prediction of the isomer composition of a particular sample (and hence its TEQ value) possible, based on values of ΔG°(f,T). A laboratory scale study was carried out with activated carbon on fly ash as the source of PCDD/F formation. Although it was found that the isomer distributions within homologues were independent of the reaction time (proof of thermodynamic control), other observations (lack of equilibrium/isomerization between isomers and lack of similarity between isomer distributions measured and predicted by ΔG°(f,T)) contradicted the possibility of thermodynamic control. Hence, this study could not confirm that de novo formation of PCDD/F could explain thermodynamically controlled isomer distributions in incinerators. Some recommendations for further work- time-based studies with precursors, isomerization studies with single congeners, and more data on ΔG°(f,T) values of PCDD/F-were made. Polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) emitted from municipal waste incinerators appear to have a chlorination pattern that is quite constant across various samples and conditions. This suggested that these patterns may be controlled by thermodynamic properties of the individual PCDD/F congeners, such as the free Gibbs energy of formation (ΔG°f,T). This would make prediction of the isomer composition of a particular sample (and hence its TEQ value) possible, based on values of ΔG°f,T. A laboratory scale study was carried out with activated carbon on fly ash as the source of PCDD/F formation. Although it was found that the isomer distributions within homologues were independent of the reaction time (proof of thermodynamic control), other observations (lack of equilibrium/isomerization between isomers and lack of similarity between isomer distributions measured and predicted by ΔG°f,T) contradicted the possibility of thermodynamic control. Hence, this study could not confirm that de novo formation of PCDD/F could explain thermodynamically controlled isomer distributions in incinerators. Some recommendations for further work - time-based studies with precursors, isomerization studies with single congeners, and more data on ΔG°f,T values of PCDD/F - were made.