3251-23-8 Usage
Physical Properties
Blue-green orthorhombic crystals; deliquescent; sublimes; readily dissolves in water, alcohols and dioxane.
The trihydrate and hexahydrate are blue rhombohedral crystals; hygroscopic; density 2.32 g/cm3 (trihydrate), 2.07 g/cm3 (hexahydrate); melts at 114°C (trihydrate); trihydrate decomposes at 170°C; hexahydrate decomposes to trihydrate at 26.4°C; both the hydrates are very soluble in water and ethanol.
Uses
Different sources of media describe the Uses of 3251-23-8 differently. You can refer to the following data:
1. Copper(II) nitrate is used in light-sensitive reproduction papers; as a mordant in dyeing and printing of fabrics; as a coloring reagent for ceramics; for coloring copper black; as a burnishing agent for iron; in nickel-plating baths; in pyrotechnic compositions; and in paints, varnishes, and enamels. Other applications are as an oxidizing agent; nitrating agent for aromatics; as a catalyst; and an analytical standard for copper.
Copper nitrate trihydrate occurs in nature as the mineral gerhardite.
2. Light-sensitive papers; analytical reagent; mordant in textile dyeing; nitrating agent; insecticide
for vines; coloring copper black; electroplating;
production of burnished effect on iron; paints; varnishes, enamels; pharmaceutical preparations; catalyst.
Preparation
Copper(II) nitrate is made by action of copper or copper(II) oxide with nitric acid. The solution is evaporated and the product is obtained by crystallization CuO + 2HNO3 → Cu(NO3)2 + H2O
The nitrate salt prepared by this method is hydrated. It cannot be dehydrated fully without decomposition. Anhydrous CuNO3 may be prepared by dissolving copper metal in a solution of dinitrogen tetroxide, N2O4, in ethyl acetate. Upon crystallization, an N2O4 adduct of Cu(NO3)2 that probably has the composition [NO+][Cu(NO3)3] is obtained. This adduct, on heating at 90°C, yields blue anhydrous copper(II) nitrate which can be sublimed in vacuum at 150°C and collected.
Reactions
Thermal decomposition of copper(II) nitrate produces copper oxides and nitrogen oxides.
In aqueous solutions, copper(II) nitrate undergoes many double decomposition reactions with soluble salts of other metals, forming precipitates of insoluble copper salts.
When H2S is passed through its aqueous solution, black CuS precipitates. Copper(II) nitrate reacts with ether forming a complex.
Hazard
Different sources of media describe the Hazard of 3251-23-8 differently. You can refer to the following data:
1. Copper(II) nitrate is moderately toxic by ingestion. Skin or eye contact can cause irritation.
LD50 oral (rat): 940 mg/kg.
Copper(II) nitrate, being an oxidizing agent, can undergo violent reactions with readily oxidizable substances. Reaction with acetic anhydride is violent, and heating with potassium or ammonium ferrocyanide at 220°C may cause an explosion. It can ignite paper on prolonged contact.
2. Oxidizer, causes violent combustion or
explosion with organic materials.
Chemical Properties
Cupric nitrate is a Blue crystalline solid.
Definition
ChEBI: An inorganic nitrate salt having copper(2+) as the couterion.
General Description
Obtained as a trihydrate and as a hexahydrate. Both are blue crystalline solids. Used in medicine, as an insecticide, in chemical analysis, in making light sensitive papers. Toxic oxides of nitrogen are produced in fires involving Copper dinitrate.
Air & Water Reactions
Deliquescent. Water soluble.
Reactivity Profile
Mixtures of Copper dinitrate with alkyl esters may explode, owing to the formation of alkyl nitrates. Mixtures with phosphorus, tin(II) chloride or other reducing agents may react explosively [Bretherick, 1979 p. 108-109]. A finely divided mixture of potassium ferrocyanide and Copper dinitrate exploded when dried at 220°C [Chem. Abst. 77:1343 (1972)]. Noncombustible, but Copper dinitrate will accelerate the burning of combustible materials. If large quantities of the material are involved in a fire or the material is finely divided, an explosion may result. Prolonged exposure to fire or heat may result in an explosion.
Health Hazard
Inhalation causes irritation of throat and lungs. Ingestion of large amounts causes violent vomiting and purging, intense pain, collapse, coma, convulsions, and paralysis. Solutions irritate eyes; contact with solid causes severe eye surface injury and skin irritation.
Safety Profile
Moderately toxic by
ingestion. A severe eye and skin irritant.
Potentially explosive reaction above 22OOC
with ammonium or potassium
hexacyanoferrate(I1). Reaction with
ammonia + potassium amide gives explosive
product. Violent reaction with acetic anhydride. May ignite on prolonged contact
with paper. Concentrated solutions may
ipte in contact with tin or aluminum foil.
Used as a fungicide, herbicide, and as a
catalyst component in solid rocket fuel.
When heated to decomposition it emits
toxic fumes of NOx. See also COPPER
COMPOUNDS and NITRATES.
Potential Exposure
Cupric nitrate is used as an insecticide, in paint, varnish, enamel, and in wood preservatives. Metal compounds are often used in “hot” operations in the work-place. These may include, but are not limited to, welding, brazing, soldering, plating, cutting, and metallizing. At the high temperatures reached in these operations, metals often form metal fumes which have different health effects and exposure standards than the original metal compound and require specialized controls.
Shipping
UN1479 Oxidizing solid, n.o.s., Hazard Class: 5.1; Labels: 5.1-Oxidizer, Technical Name Required.
Incompatibilities
A strong oxidizer. Aqueous solution is acidic; incompatible with bases. Violent reaction with potassium hexacyanoferrate; ammonia and potassium amide mixtures; acetic anhydrides, cyanides, ethers. Forms explosive materials with nitromethanes, sodium hypobromite; acetylene; chemically active metals, such as potassium, sodium, etc. May ignite on contact with aluminum foil or tin. Risk of spontaneous combustion with combustibles (wood, cloth, etc.) organics, or reducing agents and readily oxidizable materials. Attacks metals in the presence of moisture.
Waste Disposal
Copper-containing soluble wastes can be concentrated through the use of ion exchange, reverse osmosis, or evaporators to the point where copper can be electrolytically removed and sent to a reclaiming firm. If recovery is not feasible, the copper can be precipitated through the use of caustics and the sludge deposited in a chemical waste landfill. Add slowly to water; stir in excess soda ash. Let stand, then neutralize. Decant solution and flush to sewer; landfill sludge
Check Digit Verification of cas no
The CAS Registry Mumber 3251-23-8 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 3,2,5 and 1 respectively; the second part has 2 digits, 2 and 3 respectively.
Calculate Digit Verification of CAS Registry Number 3251-23:
(6*3)+(5*2)+(4*5)+(3*1)+(2*2)+(1*3)=58
58 % 10 = 8
So 3251-23-8 is a valid CAS Registry Number.
InChI:InChI=1/Cu.NO3/c;2-1(3)4/q+2;-1
