37083-40-2

Usage

Uses

meso-Tetra(2-methylphenyl) Porphine is a synthetic methylphenylated porphyrin.

Upstream product

• 109-97-7 pyrrole 
• 529-20-4 2-methylphenyl aldehyde 
• 577-16-2 2-Methylacetophenone 

Downstream Products

• 52155-50-7 5,10,15,20-tetra(o-tolyl)porphyrin iron(III) chloride 
• 41753-62-2 Co(porphyrin)(meso-ortho-tolyl)4 

Relevant academic research and scientific papers

Effects of β-bromine substitution and core protonation on photosensitizing properties of porphyrins: Long wavelength photosensitizers

In this study, a series of β-brominated meso-tetraphenylporphyrins, H2TPPBrx (x = 2, 4, 6 and 8) with remarkably red shifted absorption bands towards the longer wavelengths of the visible light known as therapeutic window and their d

K2S2O8mediated synthesis of 5-Aryldipyrromethanes and meso-substituted A4-Tetraarylporphyrins

The synthesis of dipyrromethanes from pyrrole and arylglyoxylic acids in the presence of K2S2O8at 90 C is reported affording dipyrromethanes in very good yields. Unlike an excess pyrrole traditionally used in dipyrromethane synthesis, the current method uses a stoichiometric amount of pyrrole avoiding any use of Br?nsted or Lewis acid. A gram scale synthesis of 5-phenyldipyrromethane is also achieved demonstrating potential scale up of dipyrromethanes using this method feasible. Subsequently, dipyrromethanes were converted to A4tetraarylporphyrins also in the presence of K2S2O8at 90C. A direct synthesis of A4-tetraphenylporphyrin from excess pyrrole and phenylglyoxylic acid in the presence of K2S2O8 at 90C is also reported.

Selective Solvent-Free and Additive-Free Oxidation of Primary Benzylic C–H Bonds with O2 Catalyzed by the Combination of Metalloporphyrin with N-Hydroxyphthalimide

Abstract: A protocol for solvent-free and additive-free oxidation of primary benzylic C–H bonds with O2 was presented through adjusting the combination of metalloporphyrins and NHPI as binary catalysts to overcome the deficiencies encountered in current oxidation systems. The effects of reaction temperature, porphyrin structure, central metal, catalyst loading and O2 pressure were investigated systematically. For the optimized combination of T(2-OCH3)PPCo and NHPI, all the primary benzylic C–H bonds could be functionalized efficiently and selectively at 120 °C and 1.0?MPa O2 with aromatic acids as the primary products. The selectivity towards aromatic acids could reach up to 70–95% in the conversion of more than 30% for most of the substrates possessing primary benzylic C–H bonds in the metalloporphyrin loading of 0.012% (mol/mol). And the superior performance of T(2-OCH3)PPCo among the metalloporphyrins investigated was mainly attributed to its high efficiency in charge transfer and fewer positive charges around central metal Co (II) which favored the adduction of O2 to cobalt (II) forming the high-valence metal-oxo complex followed by the production of phthalimide N-oxyl radical (PINO) and the initiation of the catalytic oxidation cycle. This work would provide not only an efficient protocol in utilization of hydrocarbons containing primary benzylic C–H bonds, but also a significant reference in the construction of more efficient C–H bonds oxidation systems. Graphic Abstract: The solvent-free and additive-free oxidation of primary benzylic C–H bonds with O2 was presented through adjusting the combination of metalloporphyrins and NHPI as binary catalysts, and the highest selectivity towards aromatic acid reached up to 95.1% with the conversion of 88.5% in the optimized combination of T(2-OCH3)PPCo and NHPI.[Figure not available: see fulltext.].

A four-phenyl porphine production method (by machine translation)

The invention discloses a production method for tetraphenyl porphin. The production method includes the steps that 1, pyrrole and aromatic aldehyde are prepared into a mixed solution for standby application; 2, solvent is added into a polymerization reactor, the pressure of the polymerization reactor is maintained at 1-5 atm, the mixed solution obtained in the step 1 starts to be dripped to start a polymerization reaction, after the reaction is finished, reaction products are cooled to normal temperature, and filter liquor and a filter cake are obtained through filtration; 3, the filter cake obtained in the step 2 and propionic acid are added into an oxidation reactor, oxygen-containing gas is introduced to carry out an oxidation reaction, cooling is carried out after oxidation is finished, a solid and filter liquor are obtained through filtration, and the solid is washed and dried to obtain the tetraphenyl porphin. The production method has the advantages of being high in yield, safe and environmentally friendly, separation and purification are easy, and the production quality is stable.

A four-phenyl porphine preparation method

The invention discloses a preparation method of meso-tetraphenylchlorin. The preparation method comprises the steps that 1, a mixed solution of pyrrole and aromatic aldehyde is prepared for standby; 2, a solvent is added into a polymerization reactor, nitrogen displacement is conducted till the concentration of tail oxygen is lower than 1%, the solvent is heated to backflow, the mixed solution obtained in the first step starts to be dropwise added, a reaction is started, after the mixed solution is dropwise added completely, the reaction is continuously conducted for 0.05 h to 0.5 h, and then the reaction is stopped; 3, oxygen-containing gas with the oxygen volume fraction ranging from 5% to 100% is fed into the polymerization reactor for oxidation, cooling is conducted after the oxidation is completed, filtration is conducted to obtain a filter cake and filtrate, and a product is obtained after the filter cake is washed and dried. The preparation method of the meso-tetraphenylchlorin has the advantages that the yield is high, safety and environmental protection are achieved, separation and purification are easy, and the product quality is stable.

Synthesis, characterization and spectral properties of substituted tetraphenylporphyrin iron chloride complexes

A series of substituted tetraphenylporphyrin iron chloride complexes [RTPPFe(III)Cl, R=o/p-NO2, o/p-Cl, H, o/p-CH3, o/p-OCH3] were synthesized by a novel universal mixed-solvent method and the spectral properties of free b

Controlled porphyrinogen oxidation for the selective synthesis of meso-tetraarylchlorins

Chlorins have been synthesized through the reduction of the corresponding porphyrins although theoretically they can be obtained from reduced macrocycle forms as porphyrinogens. A new method for the oxidation of meso- tetraarylporphyrinogens was developed generating a substantial amount of chlorin relatively to porphyrin. The structure of the porphyrinogen, particularly the presence of substituents on the meso-phenyl groups, is decisive for the final yield of chlorin. In the case of meso-tetrakis(2,6-dichlorophenyl)porphyrinogen, 92% of the corresponding chlorin is obtained.

Novel synthesis of meso-tetraarylporphyrins using CF3SO 2Cl under aerobic oxidation

meso-Tetraarylporphyrins are synthesized from pyrrole and aryl aldehydes cleanly and efficiently in one pot at room temperature using equimolar amount of CF3SO2Cl in the presence of air as oxidant. By this novel method 5,10,15,20-tetraarylporphyrins can be prepared in excellent yields.

Phosphorus pentachloride (PCl5) mediated synthesis of tetraarylporphyrins

A new synthesis of porphyrins from pyrrole and substituted benzaldehydes is described, with PCl5 as catalyst. Aromatic aldehydes condense irreversibly with pyrrole in the presence of this catalyst, and aerobic oxidation of porphyrinogen provides functionalized porphyrins in yields of 20-65%.

Synthesis of meso-tetraarylporphyrins in air with silica chloride as catalyst

Meso-tetraarylporphyrins (14 examples) are prepared efficiently by condensation of pyrrole with aromatic aldehydes in the presence of silica chloride, followed by air oxidation. The method is compared with other published procedures.