5280-68-2 Usage
Uses
Pigment Red 146 can be used for aqueous inkjet set and inkjet printing.
Properties and Applications
TEST ITEMS
SPECIFICATION
APPEARANCE
RED POWDER
SHADE
BLUISH
HEAT RESISTANCE
180 °C min
LIGHT FASTNESS
6-7
ACID RESISTANCE
4
ALKALI RESISTANCE
5
FASTNESS TO BLEEDING
5
OIL ABSORPTION
40-50%
SPECIFIC SURFACE
30 m
2
/g
DENSITY
1.50 g/cm
3
RESIDUE ON 80 MESH
5.0% max
WATER SOLUBLE
1.0% max
VOLATITE 105 °C
1.0% max
TINTING STRENGTH
100-105 %
TEST ITEMS
SPECIFICATION
APPEARANCE
RED POWDER
SHADE
BLUISH
HEAT RESISTANCE
180 °C min
LIGHT FASTNESS
6-7
ACID RESISTANCE
4
ALKALI RESISTANCE
5
FASTNESS TO BLEEDING
5
OIL ABSORPTION
40-50%
DENSITY
1.50 g/cm
3
RESIDUE ON 80 MESH
5.0% max
WATER SOLUBLE
1.0% max
VOLATITE 105 °C
1.0% max
TINTING STRENGTH
100-105 %
Check Digit Verification of cas no
The CAS Registry Mumber 5280-68-2 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 5,2,8 and 0 respectively; the second part has 2 digits, 6 and 8 respectively.
Calculate Digit Verification of CAS Registry Number 5280-68:
(6*5)+(5*2)+(4*8)+(3*0)+(2*6)+(1*8)=92
92 % 10 = 2
So 5280-68-2 is a valid CAS Registry Number.
InChI:InChI=1/C33H27ClN4O6/c1-42-27-14-13-20(32(40)35-21-10-5-4-6-11-21)16-26(27)37-38-30-22-12-8-7-9-19(22)15-23(31(30)39)33(41)36-25-18-28(43-2)24(34)17-29(25)44-3/h4-18,39H,1-3H3,(H,35,40)(H,36,41)
5280-68-2Relevant articles and documents
Production process and system for insoluble azo pigments
-
Page/Page column 7-8; 10, (2008/06/13)
An insoluble azo pigment is produced by ejecting a diazo solution and a grounding solution continuously into an ejector such that within the ejector, the diazo solution and grounding solution are mixed with each other and are subjected to a coupling reaction. A production system for the insoluble azo pigment includes the following units (1) to (4): (1) a first feed tank (2) for a first fluid selected from the diazo solution or grounding solution, a first flow path (a) for feeding the first fluid to nozzles of an ejector (1), and a pump (d) for feeding the first fluid through the first flow path; (2) the ejector (1) provided with the nozzles, a suction chamber, a diffuser, and a temperature control device (g); (3) a second feed tank (3) for a second fluid, a second flow path (b) for guiding the second fluid into the suction chamber, and a flow control device (e) for controlling a flow rate of the second fluid through the second flowpath (b); and (4) a heat treatment tank (5) for subjecting to heat treatment a suspension of the insoluble azo pigment formed by a reaction between the first fluid and the second fluid, and a third flow path (a′) for guiding the suspension from the diffuser to the heat treatment tank.