54272-29-6

Usage

InChI:InChI=1/C6H15N.H2O4S/c1-4-7(5-2)6-3;1-5(2,3)4/h4-6H2,1-3H3;(H2,1,2,3,4)/p-1

Upstream product

• 121-44-8 triethylamine 
• 99911-48-5 Triethylammoniumsalz der Acetoacetamid-N-sulfonsaeure 
• 7664-93-9 sulfuric acid 

Downstream Products

• 121-44-8 triethylamine 
• 128060-21-9 O-(2-cyanoethyl)-bis-triethylammonium phosphorothioate 

Relevant academic research and scientific papers

Aiding the versatility of simple ammonium ionic liquids by the synthesis of bioactive 1,2,3,4-tetrahydropyrimidine, 2-aminothiazole and quinazolinone derivatives

Simple ammonium ionic liquids [ILs] are efficient, green, environmentally friendly catalysts in promoting the Biginelli condensation reaction, Hantzsch reaction and Niementowski reaction to afford 1,2,3,4-tetrahydropyrimidine, 2-aminothiazole and quinazolinone derivatives respectively by eliminating the need for harmful volatile organic solvents. These [ILs] are air and water stable, easy to prepare and cost-effective. The effects of the anions and cations present in [IL] on reactions were investigated. The results clearly indicated that the Biginelli condensation reaction, Hantzsch reaction and Niementowski reaction were heavily influenced by the acidity of [IL], and among various ammonium ionic liquids, [Et3NH][HSO4] showed the best catalytic activity. Furthermore, [IL] could be easily separated and reused with a slight loss of its activity. This technique provided a good alternative way for the industrial synthesis of 1,2,3,4-tetrahydropyrimidinones, 2-aminothiazoles and quinazolinones. The present processes are eco-friendly methods for the synthesis of these derivatives authenticated by several green parameters, namely,E-factor, process mass intensity, reaction mass efficiency, atom economy, and carbon efficiency.

Quantitative glucose release from softwood after pretreatment with low-cost ionic liquids

Softwood is an abundantly available feedstock for the bio-based industry. However, achieving cost-effective sugar release is particularly challenging, owing to its guaiacyl-only lignin. Here, we report the highly effective pretreatment of the softwood pine (Pinus sylvestris) using ionoSolv pretreatment, a novel ionic liquid-based lignocellulose fractionation technology. Three protic, low-cost ionic liquids, 1-butylimidazolium hydrogen sulfate, triethylammonium hydrogen sulfate and N,N-dimethylbutylammonium hydrogen sulfate, were used to fractionate the biomass into a carbohydrate-rich pulp and a lignin. The carbohydrate-rich pulp was hydrolysed into fermentable sugars by enzymatic saccharification. Under the most successful pretreatment conditions, quantitative glucose release from the pulp was achieved, which equates to a projected glucose release of 464 mg per gram of pine wood entering the process. We further intensified the process by increasing the solid to solvent ratio up to 1:2 g g-1 while maintaining saccharification yields of 75% of the theoretical maximum. We also demonstrate for the first time that N,N-dimethylbutylammonium hydrogen sulfate, [DMBA][HSO4], is an excellent low-cost pretreatment solvent, surpassing the pretreatment effectiveness of its symmetrically substituted analogue triethylammonium hydrogen sulfate. This shows that ionoSolv pretreatment with protic hydrogen sulfate ionic liquids is a truly feedstock-independent pretreatment option, further increasing the commercial potential of this pretreatment technology.

Triethylammonium-based protic ionic liquids with sulfonic acids: Phase behavior and electrochemistry

Six triethylammonium-based protic ionic liquids (PILs) and two molten salts were synthesized via a proton transfer reaction from sulfonic acid to triethylamine (TEA). The PILs were characterized by 1H NMR, 13C NMR, 1H/15N NMR and FT-IR spectroscopic methods. The phase behavior of the PILs was studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The temperature dependences of the PILs electrical conductivity, viscosity, and electrochemical stability window (ECW) were studied. The highest electrical conductivity and ECW values are registered in triethylammonium triflate. The thermal and electrochemical characteristics of the salts obtained in this work have been analyzed in comparison with the literature data by the properties of triethylammonium-based salts with sulfonic acids.

ACESULFAME POTASSIUM COMPOSITIONS AND PROCESSES FOR PRODUCING SAME

A process for producing acesulfame potassium, the process comprising the steps of providing a cyclizing agent composition comprising a cyclizing agent and a solvent and having an initial temperature, cooling the cyclizing agent composition to form a cooled cyclizing agent composition having a cooled temperature less than 35° C., reacting an acetoacetamide salt with the cyclizing agent in the cooled cyclizing agent composition to form a cyclic sulfur trioxide adduct composition comprising cyclic sulfur trioxide adduct; and, forming from the cyclic sulfur trioxide adduct in the cyclic sulfur trioxide adduct composition the finished acesulfame potassium composition comprising non-chlorinated acesulfame potassium and less than 39 wppm 5-chloro-acesulfame potassium. The cooled temperature is at least 2° C. less than the initial temperature.

Rapid pretreatment of: Miscanthus using the low-cost ionic liquid triethylammonium hydrogen sulfate at elevated temperatures

Deconstruction with low-cost ionic liquids (ionoSolv) is a promising method to pre-condition lignocellulosic biomass for the production of renewable fuels, materials and chemicals. This study investigated process intensification strategies for ionoSolv pretreatment of Miscanthus × giganteus with the low-cost ionic liquid triethylammonium hydrogen sulfate ([TEA][HSO4]) in the presence of 20 wt% water, using high temperatures and a high solid to solvent loading of 1:5 g/g. The temperatures investigated were 150, 160, 170 and 180 °C. We discuss the effect of pretreatment temperature on lignin and hemicellulose removal, cellulose degradation and enzymatic saccharification yields. We report that very good fractionation can be achieved across all investigated temperatures, including an enzymatic saccharification yield exceeding 75% of the theoretical maximum after only 15 min of treatment at 180 °C. We further characterised the recovered lignins, which established some tunability of the hydroxyl group content, subunit composition, connectivity and molecular weight distribution in the isolated lignin while maintaining maximum saccharification yield. This drastic reduction of pretreatment time at increased biomass loading without a yield penalty is promising for the development of a commercial ionoSolv pretreatment process.

Simple protic ionic liquid [Et3NH][HSO4] as a proficient catalyst for facile synthesis of biscoumarins

Abstract: We have explored a number of protic ionic liquids (PILs) as a catalyst for the synthesis of biscoumarins by condensation of 4-hydroxycoumarin with an aromatic aldehyde. Methylimidazolium- and triethylammonium-based PILs were synthesized by simple neutralization reaction with protic acids. Triethylammonium hydrogen sulfate [Et3NH][HSO4] was found to be the best among the studied PILs concerning the yield of products and reaction time period. Different biscoumarin derivatives were synthesized based on 4-hydroxycoumarin and various substituted aromatic aldehydes at optimum reaction conditions. Obtained products were separated just by simple filtration. The facile method does not require additional purification for formed products. The catalyst has shown better yields along with outstanding recyclability, providing an environmental benign protocol for the synthesis of biscoumarin derivatives. Graphical Abstract: Screening of simple protic ionic liquids as a catalyst in the synthesis of biscoumarins, out of which [Et3NH][HSO4] was found to be best among the studied PILs.

One-pot integrated biofuel production using low-cost biocompatible protic ionic liquids

The transformation of biomass into liquid fuels is of great importance. Previous work has demonstrated the capability of specific ionic liquids (ILs), such as 1-ethyl-3-methylimidazolium acetate ([C2C1Im][OAc]) and cholinium lysinate ([Ch][Lys]), to be effective biomass pretreatment solvents. Using these ILs for an integrated biomass-to-biofuel configuration is still challenging due to a significant water-wash related to the high toxicity of [C2C1Im][OAc] and pH adjustment prior to saccharification for the highly basic [Ch][Lys]. In this work, we demonstrate, for the first time, that a one-pot integrated biofuel production is enabled by a low cost (～$1 per kg) and biocompatible protic IL (PIL), ethanolamine acetate, without pH adjustments, water-wash and solid-liquid separations. After pretreatment, the whole slurry is directly used for simultaneous saccharification and fermentation (SSF) with commercial enzyme cocktails and wild type yeast strains, generating 70% of the theoretical ethanol yield (based on switchgrass). The structure-performance relationships of PILs in terms of lignin removal, net basicity, and pH value are systematically studied. A technoeconomic analysis (TEA) revealed that an integrated biorefinery concept based on this PIL process could potentially reduce the minimum ethanol selling price by more than 40% compared to scenarios that require pH adjustment prior to SSF. Improvement of the economic performance will be made by reducing the dilution and enzyme loading during SSF as identified by TEA. This study demonstrates the impact of a biocompatible IL in terms of process optimization and conversion efficiency, and opens up avenues for realizing an IL based efficiently integrated biomass conversion technology.

Ir/C and Brφnsted acid functionalized ionic liquids an efficient catalytic system for hydrogenation of nitrobenzene to: P -aminophenol

In this study, we found that the phenylhydroxylamine intermediate could desorb more easily from an Ir surface than from a Pt surface, which is beneficial for inhibiting the over-hydrogenation of phenylhydroxylamine to aniline. On the other hand, the Brφnsted acid functionalized ionic liquids with sulfonic acid and bisulfate anions were acidic enough to catalyze the Bamberger rearrangement to form p-aminophenol from phenylhydroxylamine. On this basis, a new catalytic system constructed by Ir/C and Brφnsted acid functionalized ionic liquid was applied, for the first time, to the one-pot hydrogenation of nitrobenzene to p-aminophenol. Our results indicate that the PAP selectivity of Ir/C and [SO3H-bmim][HSO4] Brφnsted functionalized ionic liquid was far more than that of the traditional Pt/C and sulfuric acid catalyst system. Furthermore, the dually functionalized ionic liquid ([HSO3-b-N-Bu3][HSO4]) can be used simultaneously as an acid catalyst and also as a surfactant, due to its higher lipophilicity. Therefore, our new catalytic system has unique advantages in the hydrogenation of nitrobenzene to p-aminophenol.

Ionic Liquid-catalyzed green protocol for Multi-component synthesis of dihydropyrano[2,3-c]pyrazoles as potential anticancer scaffolds

A series of 6-amino-4-substituted-3-methyl-2,4-dihydropyrano[2,3-c]pyrazole-5-carbonitriles 5a–j were synthesized via one-pot, four-component condensation reactions of aryl aldehydes 1a–j, propanedinitrile (2), hydrazine hydrate (3) and ethyl acetoacetate (4) under solvent-free conditions. We report herein the use of the Br?nsted acid ionic liquid (BAIL) triethylammonium hydrogen sulphate [Et3NH][HSO4] as catalyst for this multi-component synthesis. Compared with the available reaction methodology, this new method has consistent advantages, including excellent yields, a short reaction time, mild reaction conditions and catalyst reusability. Selected synthesized derivatives were evaluated for in vitro anticancer activity against four human cancer cell lines viz. melanoma cancer cell line (SK-MEL-2), breast cancer cell line(MDA-MB-231), leukemia cancer cell line (K-562) and cervical cancer cell line (HeLa). Compounds 5b, 5d, 5g, 5h and 5j exhibited promising anticancer activity against all selected human cancer cell lines, except HeLa. Molecular docking studies also confirmed 5b and 5d as good lead molecules. An in silico ADMET study of the synthesized anticancer agents indicated good oral drug-like behavior and Non-toxic nature.

Greener approach: Ionic liquid [Et3NH][HSO4]-catalyzed multicomponent synthesis of 4-arylidene-2-phenyl-5(4H)oxazolones under solvent-free condition

We have developed simple, greener, safer multicomponent synthesis series of 4-arylidene-2-phenyl-5(4H) oxazolones 4(a-r) catalyzed by Bronsted acid ionic liquid as triethylammonium hydrogen sulfate [Et3NH][HSO4] and catalytic amount of acetic anhydride and sodium acetate with excellent yields (90–99%). The protocol offers economical, environmentally benign, solvent-free conditions, and recycle–reuse of the catalyst and easily available starting as benzoyl chloride 1, amino acid 2 and a variety of aldehydes 3. The cyclization followed by condensation of benzoyl chloride, amino acid, and a variety of aldehydes catalyzed by ILs [Et3NH][HSO4] and catalytic amount of acetic anhydride and sodium acetate. The final products were confirmed by their characterization data such as FTIR, 1H-NMR, 13C-NMR, Mass, high-resolution mass spectra and were compared with its reported method.