71515-74-7

Upstream product

• 138642-62-3 2-Cyanophenylboronic acid 
• 7468-67-9 o-formylbenzonitrile 
• 91-15-6 phthalonitrile 

Downstream Products

• 1354833-34-3 2-(2-vinyl-2H-tetrazol-5-yl)benzonitrile 
• 1354833-38-7 2-(1-vinyl-1H-tetrazol-5-yl)benzonitrile 

Relevant academic research and scientific papers

Synthesis and characterization of magnetic Fe3O4@Creatinine@Zr nanoparticles as novel catalyst for the synthesis of 5-substituted 1H-tetrazoles in water and the selective oxidation of sulfides with classical and ultrasonic methods

Tetrazoles and sulfoxide compounds have a wide range of applications in industries and are of great expectation to be environmentally friendly and cost-effective. This paper reports the introduction of zirconium supported on Fe3O4 na

Magnetization of biochar nanoparticles as a novel support for fabrication of organo nickel as a selective, reusable and magnetic nanocatalyst in organic reactions

Catalyst species are an important class of materials in chemistry, industry, medicine and biotechnology. Also, waste recycling is an important process in green chemistry and economic efficiency. Therefore, in order to recycle waste, biochar nanoparticles were prepared from chicken manure. Then, the biochar nanoparticles were magnetized under a green and environmentally friendly method. Finally, the surface of the magnetic biochar nanoparticles was modified and further they were applied as a novel support for fabrication of nickel as a homoselective and reusable catalyst in organic reactions. The structure of this organic-inorganic catalyst has been characterized by N2adsorption-desorption isotherms, and the SEM, EDS, WDX, XRD, TGA, AAS, FT-IR and VSM techniques. This magnetically recyclable catalyst was used in the homoselective synthesis of tetrazole and pyranopyrazole derivatives. This catalyst can be reused several times without significant loss of its catalytic efficiency. The heterogeneity and stability of this nanocatalyst were studied by hot filtration and the AAS technique. Also, the reused catalyst was characterized by the SEM, EDS, AAS and BET techniques.

Polymer-Supported Fe-Phthalocyanine Derived Heterogeneous Photo-Catalyst for the Synthesis of Tetrazoles Under Visible Light Irradiation

Abstract: Herein, a polymer supported Fe-Phthalocyanine entangled with carboxyl functionalized benzimidazolium moiety (PSFePcCFBM) explored as heterogenous photocatalyst, for regioselective synthesis of 1H-tetrazoles from sodium azide and other affordable

Fe3O4@L-lysine-Pd(0) organic–inorganic hybrid: As a novel heterogeneous magnetic nanocatalyst for chemo and homoselective [2 + 3] cycloaddition synthesis of 5-substituted 1H-tetrazoles

An efficient and sustainable synthetic protocol has been presented to synthesis and 5-substituted 1H-tetrazole privileged heterocyclic substructures. The synthetic protocol involves two-component reaction between aryl nitriles and NaN3 in water using complex of L-lysine-palladium nanoparticles (NPs) modified Fe3O4 nanoparticles as magnetically separable, recyclable, and reusable heterogeneous catalyst. Magnetically retrievable L-lysine-Pd(0) modified Fe3O4 nanoparticles were applied in [2 + 3] cycloaddition synthesis of 5-substituted 1H-tetrazoles. The advantages of this strategy include easy recovery and efficient reusability of the expensive Pd NPs, obtaining high yields of [2 + 3] cycloaddition, short reaction times, and all of the reported synthetic strategies are being performed in water as green solvent for a wide range of substrates.

Sustainable and recyclable magnetic nanocatalyst of 1,10-phenanthroline Pd(0) complex in green synthesis of biaryls and tetrazoles using arylboronic acids as versatile substrates

A magnetic nanocatalyst was purveyed as a heterogeneous recoverable palladium-based catalyst anchored on green, sustainable and phosphine free support. Resulted Fe3O4@SiO2-Phen-Pd(0) nanocatalyst bearing powerful phenanthroline ligand was thoroughly characterized by physicochemical approaches like UV–vis, FT-IR, EDX, XRD, TGA, ICP, VSM, DLS, FESEM, and TEM analyses. After finding trustable data, the obtained magnetic catalyst was considered to be applied in the Suzuki-Miyaura type C-C couplings and getting corresponding tetrazoles using arylboronic acid derivatives as alternate precursors of aromatic halides and stupendous data were observed.

Fabricated copper catalyst on biochar nanoparticles for the synthesis of tetrazoles as antimicrobial agents

Biochar is a carbon-rich solid which its surface was covered by high density of carbonyl, hydroxyl and carboxylic acid functional groups. In this work, biochar nanoparticles were prepared from pyrolysis of chicken manure and further a new copper catalyst

Copper and nickel immobilized on cytosine@MCM-41: as highly efficient, reusable and organic–inorganic hybrid nanocatalysts for the homoselective synthesis of tetrazoles and pyranopyrazoles

In this work, a green approach is reported for efficient synthesis of biologically active tetrazole and pyranopyrazole derivatives in the presence of Cu-Cytosine@MCM-41 and Ni-Cytosine@MCM-41 (copper (II) and nickel (II) catalyst on the modified MCM-41 us

Guanidine complex of copper supported on boehmite nanoparticles as practical, recyclable, chemo and homoselective organic–inorganic hybrid nanocatalyst for organic reactions

Boehmite (BO) nanoparticles (NPs) were prepared via the injection of aqueous NaOH solution to aqueous aluminum nitrate solution at room temperature. Afterwards, a new complex of copper was immobilized on BO-NPs (Cu-Guanidine@BO-NPs). This heterogeneous nanocatalyst was used as a practical, recyclable, chemo and homoselective nanocatalyst in the organic processes, i.e. the preparation of tetrazole five-membered heterocycles and chemoselective sulfoxidation of sulfides using H2O2 as oxidant. In this sense, the prepared nanocatalyst was characterized by AAS, N2 adsorption–desorption isotherms, WDX, EDS, SEM, and TGA techniques. The reusability of this catalyst was investigated in the described organic reactions for several runs without notable loss of its catalytic activity. Moreover, all of the tetrazole and sulfoxide derivatives were isolated in high Turn Over Number (TON) and Turn Over Frequency (TOF) numbers indicating the high activity and selectivity of Cu-Guanidine@BO-NPs in the described reactions.

Ordered mesoporous SBA-15 functionalized with yttrium(III) and cerium(III) complexes: Towards active heterogeneous catalysts for oxidation of sulfides and preparation of 5-substituted 1H-tetrazoles

Mesoporous SBA-15 was synthesized and modified with 3-chloropropyltrimethoxysilane and then used in immobilization of creatinine groups, which were employed to introduce Y3+ and Ce3+ to give rise to two novel yttrium and cerium catalysts: SBA-15@Creatinine@M (M?=?Y and Ce). The structures of the SBA-15@Creatinine@M catalysts were determined using various techniques. These catalysts offered outstanding catalytic performances in the oxidation of sulfides to sulfoxides and in the preparation of 5-substituted 1H-tetrazoles. An important characteristic of the SBA-15@Creatinine@M catalysts is that they are very stable without a considerable decrease in their catalytic performance lasting seven cycles.

Immobilization of cerium (IV) and erbium (III) in mesoporous MCM-41: Two novel and highly active heterogeneous catalysts for the synthesis of 5-substituted tetrazoles, and chemo- and homoselective oxidation of sulfides

Two well-ordered 2D-hexagonal cerium (IV) and erbium (III) embedded functionalized mesoporous MCM-41(MCM-41@Serine/Ce and MCM-41@Serine/Er) have been developed via functionalization of mesoporous MCM-41. The surface modification method has been used in the preparation of serine-grafted MCM-41 and led to the development of MCM-41@Serine. The reaction of MCM-41@Serine with Ce (NH4)2(NO3)6·2H2O or ErCl3·6H2O in ethanol under reflux led to the organization of MCM-41@Serine/Ce and MCM-41@Serine/Er catalysts. The structures of these catalysts were determined using scanning electron microscopy, mapping, energy-dispersive X-ray spectroscopy, Fourier transform-infrared, thermogravimetric analysis, X-ray diffraction, inductively coupled plasma, and Brunauer–Emmett–Teller analysis. These MCM-41@Serine/Ce and MCM-41@Serine/Er catalysts show outstanding catalytic performance in sulfides oxidation and synthesis of 5-substituted tetrazoles. These catalysts can be recycled for seven repeated reaction runs without showing a considerable decrease in catalytic performance.