Welcome to LookChem.com Sign In|Join Free
  • or
bis(4-ethenylphenyl)methanone is a chemical with a specific purpose. Lookchem provides you with multiple data and supplier information of this chemical.

74290-97-4

Post Buying Request

74290-97-4 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

74290-97-4 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 74290-97-4 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 7,4,2,9 and 0 respectively; the second part has 2 digits, 9 and 7 respectively.
Calculate Digit Verification of CAS Registry Number 74290-97:
(7*7)+(6*4)+(5*2)+(4*9)+(3*0)+(2*9)+(1*7)=144
144 % 10 = 4
So 74290-97-4 is a valid CAS Registry Number.

74290-97-4Relevant academic research and scientific papers

Synthesis of Symmetrical Diaryl Ketones by Cobalt-Catalyzed Reaction of Arylzinc Reagents with Ethyl Chloroformate

Rérat, Alice,Michon, Christophe,Agbossou-Niedercorn, Francine,Gosmini, Corinne

, p. 4554 - 4560 (2016/09/23)

Symmetrical diaryl ketones were prepared by a cross-coupling reaction between aryl bromides and ethyl chloroformate. This new method, which uses a catalyst composed of CoBr2and a bipyridine ligand along with readily available starting materials, allows for the synthesis of a variety of symmetrical diaryl ketones in moderate to excellent yields (37–99 %) under mild conditions. This reaction, in which ethyl chloroformate acts as a surrogate of carbon monoxide in the presence of cobalt and zinc, represents an interesting alternative to previously known approaches for the synthesis of diarylmethanones.

Pd/Cu-cocatalyzed aerobic oxidative carbonylative homocoupling of arylboronic acids and CO: A highly selective approach to diaryl ketones

Ren, Long,Jiao, Ning

supporting information, p. 2411 - 2414 (2014/10/15)

A highly selective Pd/Cu-cocatalyzed aerobic oxidative carbonylative homocoupling of arylboronic acids has been developed. This method employs a simple catalytic system, readily available boronic acids as the substrates, molecular oxygen as the oxidant, and 1 atm of CO/O2, which makes this method practical for further applications.

Preparation of polystyrene beads with dendritically embedded TADDOL and use in enantioselective Lewis acid catalysis

Sellner, Holger,Rheiner, P. Beat,Seebach, Dieter

, p. 352 - 387 (2007/10/03)

A full account is given of the preparation and use of TADDOLates, which are dendritically incorporated in polystyrene beads (Scheme 1). A series of styryl-substituted TADDOLs with flexible, rigid, or dendritically branching spacers between the TADDOL core and the styryl groups (2-16 in number) has been prepared (5-7, 20, 21, 26 in Schemes 2-4 and Fig. 1-3). These were used as cross-linkers in styrene-suspension polymerization, leading to beads of ca, 400-μm diameter (Schemes 5 and 6, b). These, in turn, were loaded with titanate and used for the Lewis acid catalyzed addition of Et2Zn to PhCHO as a test reaction (Scheme 6). A comparison of the enantioselectivities and degrees of conversion (both up to 99%), obtained under standard conditions, shows that these polymer-incorporated Ti-TADDOLates are highly efficient catalysts for this process (Table 1). In view of the effort necessary to prepare the novel, immobilized catalysts, emphasis was laid upon their multiple use. The performance over 20 cycles of the test reaction was best with the polymer obtained from the TADDOL bearing four first-generation Frechet branches with eight peripheral styryl groups (6, p-6, p-6·Ti(OiPr)2): the enantioselectivity (Fig. 4), the rate of reaction (Fig. 5), and the swelling factor (Fig. 6) were essentially unchanged after numerous operations carried out with the corresponding beads of 400-μm diameter and a degree of loading of 0.1 mmol TADDOLate/g polymer, with or without stirring (Fig. 7). The rate with the dendritically polymer-embedded Ti-TADDOLate (p-6·Ti(OiPr)2) was greater than that measured with the corresponding monomer, i.e., 6·Ti(OiPr)2 (Fig. 8). Possible interpretations of this phenomenon are proposed. A polymer-bound TADDOL, generated on a solid support (by Grignard addition to an immobilized tartrate ester ketal) did not perform well (Scheme 4 and Table 2). Also, when we prepared polystyrene beads by copolymerization of styrene, a zero-, first-, or second-generation dendritic cross-linker, and a mono-styryl-substituted TADDOL derivative, the performance in the test reaction did not rival that of the dendritically incorporated Ti-TADDOLate ((p-6·Ti(OiPr)2) (Scheme 7 and Fig. 10). Finally, we have applied the dendritically immobilized Cl2 and (TsO)2Ti-TADDOLate as chiral Lewis acid to preferentially prepare one enantiomer of the exo and the endo (3 + 2) cycloadduct, respectively, of diphenyl nitrone to 3-crotonoyl-1,3-oxazolidinone; in one of these reaction modes, we have observed an interesting conditioning of the catalyst: with an increasing number of application cycles, the amount of polymer-incorporated Lewis acid required to induce the same degree of enantioselectivity, decreased; the degrees of diastereo- and enantioselectivity were, again, comparable to those reported for homogeneous conditions (Fig. 9).

AROMATIC KETONES EITH TERMINAL VINYL GROUPS

Uvarova, L. R.,Burykina, L. K.,Zubareva, M. M.,Polyanskii, I. D.

, p. 1346 - 1349 (2007/10/02)

The Friedel-Crafts acylation of a hydrocarbon by an acylating agent containing bromoalkyl substituents gave a series of new ketones.Their subsequent dehydrobromination with potassium tert-butoxide gave high yields of aromatic ketones containing terminal vinyl groups.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 74290-97-4