757-58-4 Usage
Chemical Properties
Hexaethyl tetraphosphate is a yellow liquid which is miscible with water and many organic solvents except kerosene; hydrolyzes in low concentration; hygroscopic. decomposes at high temperatures. It is difficult to burn. It is toxic by skin absorption and inhalation. It is a mixture of ethyl phosphates and ethyl pyrophosphate. It decomposes at high temperatures. May be found in the form of a dry mixture where the liquid is absorbed onto a dry carrier.
Uses
Hexaethyl tetraphosphate is used as an insecticide, in particular, the insecticide Bladan. The Germans commonly used this chemical as an insecticide during World War II, when nicotine-based insecticides were not available.
Preparation
Hexaethyl tetraphosphate was first synthesised by the German chemist Gerhard Schrader, who reacted phosphorus oxychloride and triethyl orthophosphate at approximately 150 °C. This reaction is known as the Schrader process. The Germans also made hexaethyl tetraphosphate by phosphorus oxychloride and ethyl alcohol. This reaction requires slightly lower pressure than the Schrader process. The reaction has a chemical equation of POCl3 + 3(C2H5)3PO4 → (C2H5)6P4O13 + 3C2H5Cl.
Definition
A mixture of ethyl phosphates and ethyl pyrophosphates (TEPP).
General Description
Tetraethyl pyrophosphate solid is a solid material on which the phosphate itself is absorbed. The phosphate itself is combustible though Hexaethyl tetraphosphate may take effort to ignite. Hexaethyl tetraphosphate is soluble in water and gradually decomposed by it. Hexaethyl tetraphosphate is toxic by inhalation(dust, etc) and by skin absorption.
Air & Water Reactions
Hexaethyl tetraphosphate is soluble in water and gradually decomposed by it.
Health Hazard
Highly toxic, may be fatal if inhaled, swallowed or absorbed through skin. Contact with molten substance may cause severe burns to skin and eyes. Avoid any skin contact. Effects of contact or inhalation may be delayed. Fire may produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
Fire Hazard
Combustible material: may burn but does not ignite readily. Containers may explode when heated. Runoff may pollute waterways. Substance may be transported in a molten form.
Check Digit Verification of cas no
The CAS Registry Mumber 757-58-4 includes 6 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 3 digits, 7,5 and 7 respectively; the second part has 2 digits, 5 and 8 respectively.
Calculate Digit Verification of CAS Registry Number 757-58:
(5*7)+(4*5)+(3*7)+(2*5)+(1*8)=94
94 % 10 = 4
So 757-58-4 is a valid CAS Registry Number.
InChI:InChI=1/C12H30O13P4/c1-7-17-26(13,18-8-2)23-28(15,21-11-5)25-29(16,22-12-6)24-27(14,19-9-3)20-10-4/h7-12H2,1-6H3