9002-83-9 Hazards Identification
GHS Hazard Statements:
Not Classified
Reported as not meeting GHS hazard criteria by 2 of 2 companies. For more detailed information, please visit ECHA C&L website.
Signal:
Danger
GHS Hazard Statements:
H220: Extremely flammable gas [Danger Flammable gases]
H280: Contains gas under pressure; may explode if heated [Warning Gases under pressure]
H371: May cause damage to organs [Warning Specific target organ toxicity, single exposure]
H373: Causes damage to organs through prolonged or repeated exposure [Warning Specific target organ toxicity, repeated exposure]
Hazard Classes and Categories:
Flammable gases (including chemically unstable gases) - Category 1
Gases under pressure - Low pressure liquefied gas
Specific target organ toxicity - Single exposure - Category 2 (kidney)
Specific target organ toxicity - Repeated exposure - Category 2 (kidney)
Flammable - 4th degree, Reactive - 3rd degree
Hazards Summary:
Can cause frostbite; Inhalation can result in dizziness and nausea at lower concentrations and cardiac sensitization and CNS depression at higher concentrations; Liver and kidney injury may occur; Vapor can displace oxygen in a confined space and act as a simple asphyxiant; Decomposition products at temperatures >250 degrees C include hydrogen fluoride and phosgene; [CHEMINFO MSDS] Trifluorochloroethylene, stabilized (UN1082) has warning of explosive polymerization; [ERG 2016]
9002-83-9 Usage
Uses
Used in Microinjection Procedure:
FLUOROLUBE GREASE, GR-362 is used as a lubricant to facilitate piercing of vitelline membranes with a glass capillary to make small holes on spider embryos.
Used in Live Imaging of Embryo Sample:
FLUOROLUBE GREASE, GR-362 is used as a lubricant for live imaging of embryo samples using the Zeiss LSM710 confocal system.
Used in Valves, Seals, and Bearings:
FLUOROLUBE GREASE, GR-362 is used as a lubricant in valves, seals, and bearings where high wear is a problem.
Used in Chemical Applications:
FLUOROLUBE GREASE, GR-362 is used as a protective barrier against chemicals. It is used as a coating and prefabricated liner for chemical applications.
Used in Industrial Applications:
FLUOROLUBE GREASE, GR-362 is used in the manufacture of gaskets, linings, and valve seats that must withstand hot and corrosive conditions. It is also used as a dielectric material, as a vapor and liquid barrier, and for microporous filters.
Used in Lubricating Pumps in Hyperbaric Chambers:
FLUOROLUBE GREASE, GR-362 is used as a lubricant for pumps in hyperbaric chambers.
Used in Halocarbon Oil 27:
FLUOROLUBE GREASE, GR-362 is used as a lubricant in Halocarbon Oil 27, which is a polymer of chlorotrifluoroethylene (CTFE).
Production Methods
PCTFE is a polymer of chlorotrifluoroethylene. It is prepared
by free-radical polymerization in an aqueous emulsion using
organic or water-soluble initiators or ionizing radiation.
Examples of applications of PCTFE are plastic molded
parts in chemical process equipment and electric parts.
Check Digit Verification of cas no
The CAS Registry Mumber 9002-83-9 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 9,0,0 and 2 respectively; the second part has 2 digits, 8 and 3 respectively.
Calculate Digit Verification of CAS Registry Number 9002-83:
(6*9)+(5*0)+(4*0)+(3*2)+(2*8)+(1*3)=79
79 % 10 = 9
So 9002-83-9 is a valid CAS Registry Number.
InChI:InChI=1/C2ClF3/c3-1(4)2(5)6
