Welcome to LookChem.com Sign In | Join Free

CAS No:123456789    This site contains about 108,618 DataSheet documents.

Position: Index > Categories > Semiconductors and Actives
1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
CAS-No.
:
:
:
:
Dichloro[1,3-bis(2,6-diisopropylphenyl)-1,3-dihydro-
2 H -imidazol-2-ylidene]palladium(II) dimer
725463
444910-17-2
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes, respiratory system and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H315
H319
H335
Precautionary statement(s)
P261
P305 + P351 + P338
Warning
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard
none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36/37/38
S-phrase(s)
S26
Irritating to eyes, respiratory system and skin.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
2.3
3.
3.1
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms
Formula
Molecular Weight
Component
:
:
:
Dichloro[1,3-bis(diisopropylphenyl)-2-imidazolidinylidene]palladium(II)
dimer
[(SIPr)PdCl2]2
CX 41
C54H72Cl4N4Pd2
1.131,83 g/mol
Concentration
Dichloro[1,3-bis(2,6-diisopropylphenyl)-1,3-dihydro-2H-imidazol-2-ylidene]palladium(II) dimer
CAS-No.
444910-17-2
-
4.
4.1
4.2
4.3
5.
5.1
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Indication of any immediate medical attention and special treatment needed
no data available
FIRE-FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
8.2
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Hydrogen chloride gas
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 ??C
Handle and store under inert gas.
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at
the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and
approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges. Use
respirators and components tested and approved under appropriate government standards such as
NIOSH (US) or CEN (EU).
9.
9.1
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour Threshold
pH
Melting point/freezing
point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Form: solid
no data available
no data available
no data available
Melting point/range: 331 ??C
no data available
no data available
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
no data available
no data available
m) Relative density
no data available
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
insoluble
no data available
no data available
no data available
no data available
no data available
no data available
9.2
10.
10.1
10.2
Other safety information
no data available
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
10.3
10.4
10.5
10.6
11.
11.1
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Oxidizing agents, Halogens
Hazardous decomposition products
Other decomposition products - no data available
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
May be harmful if inhaled. Causes respiratory tract irritation.
May be harmful if swallowed.
May be harmful if absorbed through skin. Causes skin irritation.
Causes serious eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.
Additional Information
RTECS: Not available
12.
12.1
12.2
ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
12.3
12.4
12.5
12.6
13.
13.1
14.
14.1
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
14.2
14.3
14.4
14.5
14.6
15.
ADR/RID: -
UN proper shipping name
ADR/RID:
Not dangerous goods
IMDG:
Not dangerous goods
IATA:
Not dangerous goods
Transport hazard class(es)
ADR/RID: -
Packaging group
ADR/RID: -
Environmental hazards
ADR/RID: no
Special precautions for user
no data available
REGULATORY INFORMATION
IMDG: -
IMDG: -
IMDG: -
IMDG Marine pollutant: no
IATA: -
IATA: -
IATA: -
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
16.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.


DICHLORO(DI-Μ-CHLORO)BIS[1,3-BIS(2,6-DI-I-PROPYLPHENYL)IMIDAZOL-2-YLIDENE]DIPALLADIUM (II)   

Related Product

CAS No.444910-17-2 Dichloro(di-渭-chloro)bis[1,3-bis(2,6-di-i-propylphenyl)imidazol-2-ylidene]dipalladium(II)

Assay:98%min Appearance:Off-white to light yellow powder Package:According to the clients requirement. Storage:Keep in cool place. Application:Pharmaceutical intermediates 

Min. Order:0

Supplier:Hangzhou J&H Chemical Co., Ltd. [ China (Mainland)]

Premium
Supplier

Tel:+86-571-87396432

Address:No.200 Zhenhua Rd.Xihu Industrial Park, Hangzhou 310030, China

Contact Suppliers

CAS No.444910-17-2 DICHLORO(DI-螠-CHLORO)BIS[1,3-BIS(2,6-DI-I-PROPYLPHENYL)IMIDAZOL-2-YLIDENE]DIPALLADIUM (II)

Assay:97% Appearance:white crystals powder Package:according to the clients requirement Storage:Room temperature with sealed well Transportation:by sea or by air Application:Use as primary and secondary intermediate 

Min. Order:0

Supplier:BOC Sciences [ United States]

Premium
Supplier

Tel:1-631-485-4226

Address:Ramsey Road

Contact Suppliers

CAS No.444910-17-2 Dichloro[1,3-bis(2,6-diisopropylphenyl)-1,3-dihydro-2H-imidazol-2-ylidene]p alladium(II) dimer, mixture of isomers

Assay:98.5% Appearance:white/off-white or light yellow Package:aluminum bottle,glass bottle,PTFE bottle,cardboard drum Storage:Store in cool and dry place, keep away from strong light and heat. Transportation:by courier, by air, by sea Application:This product can be used in food/pharmaceutical/cosmetical industry 

Min. Order:0

Supplier:Suzhou Health Chemicals Co., Ltd. [ China (Mainland)]

Premium
Supplier

Tel:13776257979

Address:No. 338, Jingang Avenue,

Contact Suppliers

CAS No.444910-17-2 DICHLORO(DI-螠-CHLORO)BIS[1,3-BIS(2,6-DI-I-PROPYLPHENYL)IMIDAZOL-2-YLIDENE]DIPALLADIUM (II)

Assay:99% Appearance:White powder Package:200/Kilograms Storage:Sealed and preserved Transportation:By sea Application:healing drugs 

Min. Order:0

Supplier:ZHEJIANG JIUZHOU CHEM CO.,LTD [ China (Mainland)]

Premium
Supplier

Tel:+86 19334956669

Address:Waisha Road,Jiaojiang

Contact Suppliers

CAS No.444910-17-2 Dichloro(di-mu-chloro)bis[1,3-bis(2,6-di-i-propylphenyl)imidazol-2-ylidene]dipalladium(II)

Assay:鈮?9.0% Package:aluminium foil bag/fiber can/plastic drum Storage:Store in cool &dry place Transportation:by courier; by sea; by air Application:compound 

Min. Order:0

Supplier:Hubei Taiho Chemical Co.,LTD [ China (Mainland)]

Premium
Supplier

Tel:+86-18120399543

Address:No. 49 taifeng Road,Qianjiang City,Hubei,China

Contact Suppliers