FENNER DRIVES MSDS NO. UBP
Material Safety Data Sheet
09/12/06 Rev 1
Emergency HOTLINE: 1-717-445-3100



1. PRODUCT AND COMPANY IDENTIFICATION
MANUFACTURER'S NAME: Fenner Drives
ADDRESS: 311 W. Stiegel Street, Manheim, PA 17545
TELEPHONE NO. +1.717.664.8314 (Monday ?? Friday, 8:00 a.m. ?? 5:00 p.m., EDT)
PRODUCT NAME &/OR NUMBER: Non-PVC Urethane and Polyester Belting Products (all colors)
TRADE NAME & SYNONYM: Eagle? Opaque 80, Eagle? Orange 85, Eagle? Clear 85, Eagle? Green 89 T, Eagle?
Red 90, Eagle? Clear 95, Eagle? Orange 85 R, Eagle? Hyfen? 85 R, Eagle? Green 89 RT, Eagle? Beige 95 R,
Eagle? Hyfen? 95 R, Eagle? Red 50D CC LCF, Eagle? Blue 55D CC, Eagle? Natural 55D CC, Eagle? Green 63 CC, Eagle? Natural 63D CC, Eagle? Red 85 CXF, Eagle? Hyfen? 85 CXF, Eagle? Hyfen? 85 CXR, Tapered Edge
Band
CHEMICAL NAME & SYNONYM: Thermoplastic polyurethanes
CHEMICAL FAMILY: Mixture FORMULA: Not Applicable

2. HAZARDS IDENTIFICATION

***************************************************************************************************************************************
***
EMERGENCY OVERVIEW
Various clear or colored solids with a faint plastic odor
The solid material is not hazardous and is not expected to cause irritation
Hazardous airborne contaminants may occur during decomposition such as in welding processes
During a fire, irritating and highly toxic gases may be generated
***************************************************************************************************************************************
***
#
3. COMPOSITION / INFORMATION ON INGREDIENTS
COMPONENT CAS NO. % EXPOSURE LEVEL
Note: Colorants comprise 0-4% of any given formulation
Colorants: (only those present @
?? 1% in ?? 1 pigment formulations)
- Aluminum Hydroxide (as AL) 21645-51-2 ?? 3.72 None established
- Antimony (SB) Metal & Compounds 7440-36-0 ?? 13.32 OSHA PEL = ACGIH TLV = 0.5 mg/M3
- Carbon Black 1333-86-4 ?? 4.0 OSHA PEL = ACGIH TLV = 3.5 mg/M3
- Chrome Antimony Titanium 68186-90-3 ?? 13.32 None established
- Chromium (III) Compound - ?? 13.32 OSHA PEL = ACGIH TLV = 0.5 mg/M3
- Ethylene Bisstearamide 110-30-5 ?? 4.0 None established
- Limestone (Total Dust) 1317-65-3 ?? 20.0 OSHA PEL = 15.0 mg/M3
- Montan Wax (PNOC Total Dust) 73138-45-1 ?? 4.41 OSHA PEL = 15.0 mg/M3
- Silicon Dioxide, Amorphous 7631-65-3 ?? 4.14 OSHA PEL = 20 mppcf or 80 mg/M3/%SiO2;
NIOSH REL = 6.0 mg/M3
- Titanium Dioxide (Total Dust) 13463-67-7 ?? 41.0 OSHA PEL = 10 mg/M3; ACGIH TLV = 10 mg/M3
Thermoplastic Polyurethane Resins Proprietary 100.0 None established

# Note: The information provided about the pigments and additives applies to their pure dry form. The form of the

pigment and additive provided to customers is encapsulated in plastic, and therefore the likelihood of exposure is much
less, even to the point of negligible. We consider the level of hazard to be negligible at ambient conditions and under
normal conditions of use.




Fenner Drives, Manheim, PA 17545 1 of 5
?Copyright 2006 by Fenner Drives. All Rights Reserved
This document is Engineering controlled. It is subject to change.
Contact Fenner Drives for latest revision
FENNER DRIVES MSDS NO. UBP
Material Safety Data Sheet

4. FIRST AID MEASURES

INGESTION: Small amounts are not likely to cause damage.
SKIN: Should not pose a hazard in normal use.
EYES: May cause slight irritation during welding processes.
INHALATION: Not likely to result in irritation in solid form. Thermal decomposition may result in release of toxic
airborne contaminants. Remove exposed individual to fresh air.
NOTES TO PHYSICIAN: No specific antidote. Use supportive care. Treatment based on physician??s judgment in
response to patient's reactions.

5. FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA: Water, ABC dry chemical, foam, or carbon dioxide (CO2) to extinguish fire. Caution! CO2
will displace air in confined spaces and may cause an oxygen deficient atmosphere.
FIRE & EXPLOSION HAZARDS: Not expected to be a hazard in normal use.
FIRE-FIGHTING EQUIPMENT: Use positive pressure self-contained breathing apparatus. Contaminants of burning
material may contain hydrogen chloride, benzene, water vapor, carbon monoxide, and carbon dioxide.
SPECIFIC HAZARDS ARISING FROM THE PRODUCTS: None known.
SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: No known special requirements.

6. ACCIDENTAL RELEASE MEASURES

Normal housekeeping or clean up to avoid slipping hazard should suffice. Keep from entering sewers, lakes or
streams. Industrial waste incineration is the recommended method of disposal, to be performed in accordance with
Federal, State and local regulations. Refer to Section 8 for additional information.

7. HANDLING AND STORAGE

STORAGE: Store in original containers at ambient environmental conditions.
SPECIAL PRECAUTIONS: Wear gloves when handling hot material.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

There are no known health hazards associated with this material when used as recommended. The following general
hygiene considerations are recognized as good industrial hygiene practices.
VENTILATION: During welding operations, use with ventilation adequate to reduce levels of air contaminants below
that which may cause personal injury or illness. Local exhaust ventilation that removes air contaminants from the
workers?? breathing zones is preferred. General, mechanical, or dilution ventilation may be suitable.
RESPIRATORY PROTECTION: Should not be necessary in normal use.
SKIN PROTECTION: Wear gloves when handling hot materials. Wash thoroughly after handling.
EYE/FACE PROTECTION: Wearing approved safety eyewear is always recommended. Have eyewash facilities
immediately available.
GENERAL: None related to solid material.
Refer to Section 3 for exposure guidelines.




2 of 5
FENNER DRIVES MSDS NO. UBP
Material Safety Data Sheet

+
9. PHYSICAL AND CHEMICAL PROPERTIES

FLASH POINT & METHOD: Not applicable AUTOIGNITION TEMPERATURE: Not applicable
FLAMMABLE LIMITS: Not applicable PHYSICAL STATE: Solid
BOILING POINT (F/C): Not applicable FREEZING POINT (F/C): Not applicable
pH: Not applicable VAPOR PRESSURE (mm Hg): Not applicable
SPECIFIC GRAVITY (H2O=1): 1.1 ?? 1.3 VAPOR DENSITY (Air=1): Not available
% VOLATILE BY VOLUME: Negligible. SOLUBILITY IN WATER: Insoluble
EVAPORATION RATE (BA=1): Not applicable ODOR THRESHOLD: Not established
APPEARANCE AND ODOR: Faint plastic odor. MELTING POINT: Above 302o F
COEFFICIENT OF WATER/OIL DISTRIBUTION: Not applicable + Based on compounded

products


10. STABILITY AND REACTIVITY

STABILITY: Stable under normal conditions of storage and use. Do not expose material to ultraviolet radiation.
CONDITIONS TO AVOID: Strong oxidizers. Decomposition occurs at processing temperatures above 500o F. Do not
overheat when splicing; use a controlled heat source. Keep hot blade clean of all residue.
INCOMPATIBILE MATERIALS: None known.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, aromatic or aliphatic fractions, and
traces of hydrogen cyanide and isocyanates.
POSSIBILITY OF HAZARDOUS REACTIONS: Will not occur in normal use.

11. TOXICOLOGICAL INFORMATION

ROUTES OF EXPOSURE: Inhalation and eyes if irritating airborne contaminants are generated during welding
processes.
INHALATION: Exposure to heated materials may cause irritation to the mucous membrane and upper respiratory tract.
Acute or chronic toxicity data is not available for the compounded products.
SKIN CONTACT: Skin contact should not be a concern during normal handling and processing. Wear protective
gloves when handling hot material. Dermal toxicity is not available for the compounded products.
INGESTION: Material should not be ingested. Toxicological data is not available for the compounded products.
EYE: Eye toxicity data is not available for the compounded products.
SYSTEMIC & OTHER EFFECTS: Systemic toxicity data is not available for the compounded products.
CARCINOGENICITY (for the compounded products): NTP - No; IARC - No; ACGIH - No; OSHA - No.
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Should not pose a hazard in normal use.
TOXICOLOGICALLY SYNERGISTIC PRODUCTS: None known.

12. ECOLOGICAL INFORMATION

ECOTOXICOLOGICAL INFORMATION: No information available for the compounded products.
CHEMICAL FATE INFORMATION: No information available for the compounded products.

13. DISPOSAL CONSIDERATIONS

RCRA Hazard Class: None. If this product as supplied becomes a waste, it does not meet the criteria of a hazardous
waste as defined under the Resource Conservation and Recovery Act (RCRA) 40 CFR 261. Pick up waste material
and place in containers for disposal. Industrial waste incineration or sanitary landfills are the recommended methods of
disposal. This advice applies to the material as manufactured. Processing, use, or contamination may make the
information inappropriate, inaccurate, or incomplete. The waste generator has the responsibility for proper waste
classification, transportation, and disposal. Dispose of material in accordance with Federal, State and local
regulations.




3 of 5
FENNER DRIVES MSDS NO. UBP
Material Safety Data Sheet

14. TRANSPORT INFORMATION

U.S. Department of Transportation: Not regulated.
International Air Transport Association: Not regulated.
Transport Canada Product Identification Number: Not regulated.

15. REGULATORY INFORMATION

TSCA (Toxic Substances Control Act): All components of this material appear on the Inventory of Chemical
Substances published by the US Environmental Protection Agency (EPA) under the authority of the Toxic Substance
Control Act (TSCA).
SARA Title III (Superfund Amendments & Reauthorization Act):
311/312 Hazard Categories (for the compounded products): Acute ?? No. Chronic ?? No. Fire ?? No. Reactive ?? No.
Pressure ?? No.
313 Reportable Ingredients: As of the preparation date of this MSDS, one or more of the ingredients in one or more
of these products contained substances subject to the reporting requirements of Section 313 of the Emergency
Planning and Community Right-to-Know Act of 1986 and of 40 CFR 372. This information must be included in all
MSDSs that are copied and distributed for this material.

Chromium (III) as CR and Compounds CAS# 7440-47-3 < 0.94%
Antimony as SB and Compounds CAS# 7440-36-0 < .37%
Zinc Compound ----- 1.15%

CERCLA (Comprehensive Response Compensation and Liability Act): Not Reportable. Contact local authorities
to determine if there may be other local reporting requirements.
WHMIS (Workplace Hazardous Materials Identification System): This MSDS has been prepared to meet WHMIS
requirements except for use of the 16 headings.

Carbon Black ?? D2A

EINECS: All components of this product are on the European Inventory of Existing Commercial Chemical Substances.
NEHAPS (National Environmental Health Action Plans): Contains no regulated substances.
EU CLASSIFICATION AND LABELING INFORMATION: Not applicable. EU Risk Phrases: Not applicable.
EU Safety Phrases: Not applicable. VOLATILE ORGANIC COMPOUNDS (VOC): Not applicable.

STATE RIGHT-TO-KNOW REQUIREMENTS:
Chemical Name: State(s)
Acrylonitrile CA, MA, MI, MN, NJ, PA, WA < 100 ppm
Arsenic CA, MA, MI, MN, NJ, PA, WA ?? 10 ppm
Cadmium CA, MA, MI, MN, NJ, PA, WA ?? 10 ppm
Chromium CA, MA, MI, MN, NJ, PA, WA ?? 6 ppm
Chromium (III) Oxide CA, MA, MI, MN, NJ, PA, WA ?? 95%
Hexavalent Chromium CA, MA, MI, MN, NJ, PA, WA < 1ppm (leachable)
Lead CA, MA, MI, MN, NJ, PA, WA ?? 90 ppm
Mercury (1 ppm) CA
Mercury CA < 5 ppm
Nickel CA, MA 50??200 ppm
PCBs (?? 25 ppm) CA
Pigment Blue 15 MA, PA
Pigment Green 7 MA, PA
Polyurethane Polyester Elastomer NJ, PA
Selenium CA < 2 ppm
Silica, Crystalline CA
Zinc Ferrite NJ, PA approx. 100%
Note: These chemicals are bound within the applicable polymer structures and are not expected to be a health hazard.


4 of 5
FENNER DRIVES MSDS NO. UBP
Material Safety Data Sheet

HMIS? HAZARD CLASSIFICATION: Health: 0 Fire: 0 Reactivity: 0 Special: see Note below
NFPA HAZARD CLASSIFICATION: Health: 0 Fire: 0 Reactivity: 0 Special: see Note below
Note: Health = 1 if welding processes create airborne contaminants. User must determine the need for personal
protective equipment under actual conditions of use, including welding.

16. OTHER INFORMATION

REVISION SUMMARY for MSDS No. UBP
Date Prepared: September 1, 2006 Last Revised: Not applicable Previous Revision: Not applicable
Summary of Revisions:
09/01/06 - New MSDS in ANSI Z400.1 format.
09/12/06 ?? Updated product information to include Tapered Edge Band

This information relates only to the specific material designated herein and does not relate to use in combination with any other
material or in any process. The information is derived from the best available sources and is current as of the date of this Material
Safety Data Sheet. Since the use of this information and the conditions of use of this product are not within the control of Fenner
Drives, it is the user's responsibility to determine the suitability and completeness of this information, and the conditions of safe use
of the product, for his own particular use.




5 of 5


Fatty acids, montan-wax, ethylene esters