Welcome to LookChem.com Sign In | Join Free

CAS No:123456789    This site contains about 108,618 DataSheet documents.

Position: Index > Categories > Semiconductors and Actives
CAS : 82061-21-0
MSDS  :
 Lithium tetramethylcyclopentadienide
CAS  
:
 82061-21-0
SYNONYMS  
:
 

Section 1 - Chemical Product and Company Identification
MSDS Name: Lithium tetramethylcyclopentadienide
Catalog Numbers: AC384600000, AC384600010, AC384600050
Synonyms:

Company Identification:

              Acros Organics N.V.
              One Reagent Lane
              Fair Lawn, NJ 07410
For information in North America, call: 800-ACROS-01
For emergencies in the US, call CHEMTREC: 800-424-9300

Section 2 - Composition, Information on Ingredients

CAS# Chemical Name Percent EINECS/ELINCS
82061-21-0 Lithium tetramethylcyclopentadienide unlisted

Section 3 - Hazards Identification

EMERGENCY OVERVIEW

Not available.
Target Organs: Respiratory system, gastrointestinal system, eyes, skin.


Potential Health Effects
Eye: Causes eye burns.
Skin: Causes skin burns.
Ingestion: Causes gastrointestinal tract burns.
Inhalation: Causes chemical burns to the respiratory tract.
Chronic: Not available.

Section 4 - First Aid Measures


Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid imme diately.
Skin: Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion: Do not induce vomiting. Get medical aid immediately.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician: Treat symptomatically and supportively.

Section 5 - Fire Fighting Measures


General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Material can spontaneously ignite (pyrophoric) when exposed to air at normal or slightly elevated temperatures. Will burn if involved in a fire. Flammable solid. Dangerous fire hazard in the form of dust when exposed to heat or flame.
Extinguishing Media: Use foam, dry chemical, or carbon dioxide.
Flash Point: Not available.
Autoignition Temperature: Not available.
Explosion Limits, Lower:Not available.
Upper: Not available.
NFPA Rating: (estimated) Health: ; Flammability: ; Instability:

Section 6 - Accidental Release Measures


General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Remove all sources of ignition. Use a spark-proof tool. Do not let this chemical enter the environment.

Section 7 - Handling and Storage


Handling: Use spark-proof tools and explosion proof equipment. Do not breathe dust, mist, or vapor. Do not get in eyes, on skin, or on clothing. Do not ingest or inhale. Use only in a chemical fume hood.
Storage: Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container. Flammables-area. Corrosives area. Store under nitrogen.

Section 8 - Exposure Controls, Personal Protection


Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits
Chemical Name ACGIH NIOSH OSHA - Final PELs
Lithium tetramethylcyclopentadienide none listed none listed none listed

OSHA Vacated PELs: Lithium tetramethylcyclopentadienide: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Not available.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - Physical and Chemical Properties


Physical State: Powder
Appearance: off-white to yellow
Odor: pungent odor
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate:Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point:> 350 deg C
Decomposition Temperature:Not available.
Solubility: Reacts.
Specific Gravity/Density:Not available.
Molecular Formula:C9H13Li
Molecular Weight:128.14

Section 10 - Stability and Reactivity


Chemical Stability: Powder or liquid is pyrophoric. Air sensitive. Moisture sensitive.
Conditions to Avoid: Incompatible materials, ignition sources, exposure to air, exposure to moist air or water.
Incompatibilities with Other Materials: Strong oxidizing agents, mineral acids, alcohols.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, lithium hydroxide.
Hazardous Polymerization: Will not occur.

Section 11 - Toxicological Information


RTECS#:      
CAS# 82061-21-0 unlisted.
LD50/LC50:
Not available.

Carcinogenicity:
CAS# 82061-21-0: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No data available.
Teratogenicity: No data available.
Reproductive Effects: No data available.
Mutagenicity: No data available.
Neurotoxicity: No data available.
Other Studies:

Section 12 - Ecological Information


Ecotoxicity: No data available. No information available.
Environmental: No information available.
Physical: No information available.
Other: Do not empty into drains.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

US DOT Canada TDG
Shipping Name: PYROPHORIC SOLID, ORGANIC, N.O.S.* No information available.
Hazard Class: 4.2
UN Number: UN2846
Packing Group: I

Section 15 - Regulatory Information

US FEDERAL

TSCA
     CAS# 82061-21-0 is not listed on the TSCA inventory. It is for research and development use only.
Health & Safety Reporting List
     None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
     None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
     None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
     None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
     None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
     None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
     This material does not contain any hazardous air pollutants.
     This material does not contain any Class 1 Ozone depletors.
     This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
     None of the chemicals in this product are listed as Hazardous Substances under the CWA.
     None of the chemicals in this product are listed as Priority Pollutants under the CWA.
     None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
     None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
     CAS# 82061-21-0 is not present on state lists from CA, PA, MN, MA, FL, or NJ.

California Prop 65

California No Significant Risk Level: None of the chemicals in this product are listed.

European/International Regulations

European Labeling in Accordance with EC Directives
Hazard Symbols:
     F C
Risk Phrases:

     R 17 Spontaneously flammable in air.
     R 34 Causes burns.

Safety Phrases:

     S 17 Keep away from combustible material.
     S 26 In case of contact with eyes, rinse immediately with plenty of
     water and seek medical advice.
     S 33 Take precautionary measures against static discharges.
     S 36/37/39 Wear suitable protective clothing, gloves and eye/face pr
     otection.
     S 45 In case of accident or if you feel unwell, seek medical advice
     immediately (show the label where possible).

WGK (Water Danger/Protection)

     CAS# 82061-21-0: No information available.
Canada - DSL/NDSL
None of the chemicals in this product are listed on the DSL or NDSL list.
Canada - WHMIS
     not available.
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
Canadian Ingredient Disclosure List

Section 16 - Additional Information

MSDS Creation Date: 8/04/2005
Revision #1 Date: 3/26/2008

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.


LITHIUM TETRAMETHYLCYCLOPENTADIENIDE   

Related Product

CAS No.82061-21-0 LITHIUM TETRAMETHYLCYCLOPENTADIENIDE

Assay:99% Package:According client's requirements Transportation:by sea/by air/by courier Application:Chemical products 

Min. Order:1Kilogram

Supplier:Hangzhou ZeErRui Chemical Co., Ltd. [ China (Mainland)]

CAS No.82061-21-0 LITHIUM TETRAMETHYLCYCLOPENTADIENIDE

Assay:99.0% Appearance:liquid Package:Grams, Kilograms Storage:Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials. Transportation:According to customer request Application:For R&D and commerical use 

Min. Order:100Gram

Supplier:Chemlyte Solutions [ China (Mainland)]

CAS No.82061-21-0 LithiuM tetraMethylcyclopentadienide

Assay:0.98 Appearance:Off white to slight yellow solid Package:1L 5L 10L 25L bottle Storage:Stored in shaded, cool and dry places Transportation:Handle with cares to avoid damaging the packages. Protect them from sunshine or rain. We can send by Fedex, by ship or by plane according to international rules. Application:pharma intermediate 

Min. Order:0

Supplier:Antimex Chemical Limied [ China (Mainland)]

CAS No.82061-21-0 LITHIUM TETRAMETHYLCYCLOPENTADIENIDE

Assay:99% Application:api 

Min. Order:0

Supplier:Zibo Hangyu Biotechnology Development Co., Ltd [ China (Mainland)]

CAS No.82061-21-0 LITHIUM TETRAMETHYLCYCLOPENTADIENIDE

Assay:99% Package:box or opp package Storage:cool drum  Transportation:air or sea Application:LITHIUM TETRAMETHYLCYCLOPENTADIENIDE 

Min. Order:1Milligram

Supplier:weifang yangxu group co.,ltd [ China (Mainland)]

CAS No.82061-21-0 Lithium tetramethylcyclopentadienide

Assay:99% Appearance:White to light yellow to light orange fluffy powder Package:according to your requirement Storage:White to light yellow to light orange fluffy powder Transportation:by air /by train/by sea Application:lab 

Min. Order:1Kilogram

Supplier:Jiangsu Xinsu New Materials Co., Ltd. [ China (Mainland)]

CAS No.82061-21-0 Factory Supply Lithium tetramethylcyclopentadienide

Assay:99% Appearance:powder or granule ( refer to COA) Package:25kgs/fiber drum Storage:Keep in a cool & dry place Transportation:by sea or by air Application:Librium, Valium 

Min. Order:0Metric Ton

Supplier:Ality Chemical Corporation [ China (Mainland)]

CAS No.82061-21-0 LITHIUM TETRAMETHYLCYCLOPENTADIENIDE CAS No.82061-21-0

Assay:99.90% Appearance:solid or liquid Package:As customer's requested Storage:sealed in cool and dry place Transportation:by courier/air/sea Application:Pharma Intermediate 

Min. Order:0

Supplier:Guangdong Juda Chemical Industrial Co.,Limited [ China (Mainland)]

CAS No.82061-21-0 LITHIUM TETRAMETHYLCYCLOPENTADIENIDE

Assay:98% Package:According to the demand of customer Storage:Sealed, dry, microtherm , avoid light and smell. Transportation:by air or by sea Application:Organic synthesis 

Min. Order:0

Supplier:Henan Allgreen Chemical Co.,Ltd [ China (Mainland)]