Material Safety Data Sheet chemusa

Section I. Chemical Product and Company Identification
?
Product Name/ MOLYVAN 856B 29201
Code
Trade Name
Mixture.
CAS#
Supplier R.T. VANDERBILT COMPANY, INC.
In Case of Call: (203) 853-1400
30 WINFIELD STREET Emergency
NORWALK, CT 06855
Organomolybdenum complex.
Synonym

Organomolybdenum complex of organic amide.
Chemical name

(Petrochemical.)
Chemical Family

Chemical Formula Not applicable.

Industrial applications: Friction reducer.
Material Uses


TSCA 8(b) inventory: MOLYVAN? 856B
TSCA Status



Section II. Composition and Information on Ingredients
Name CAS # % by Weight

amides, coco, N,N-bis(hydroxyethyl), reaction products with coco 445409-27-8 90-95
monoglycerides and molybdenum oxide.
petroleum process oil, <3.0% DMSO extractable material 64742-52-5 5-10



Section III. Hazards Identification
Light amber liquid. May be harmful if inhaled. May cause eye and skin irritation.
Emergency Overview




Section IV. First Aid Measures
Check for and remove any contact lenses. Flush with running water for at least 15 minutes. Do not use an
Eye Contact
eye ointment. Seek medical attention.
After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated
Skin Contact
skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and
groin. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash
contaminated clothing before reusing.

Allow the victim to rest in a well ventilated area. Seek immediate medical attention
Inhalation


Do not induce vomiting. Immediately give two glasses of water, a little at a time. Never give anything by
Ingestion
mouth to an unconscious person. Call a physician. If vomiting occurs spontaneously, lower head below waist
to prevent fluid from entering the lungs




Continued on Next
Section V. Fire and Explosion Data
Slightly flammable to flammable in presence of open flames and sparks.
Flammability of the Product

Not available.
Autoignition Temperature

OPEN CUP: 193.5??C (380.3??F) (Cleveland.).
Flash Point

Not available.
Flammable Limits

nitrogen oxides (NO, NO2...) carbon oxides (CO, CO2) molybdenum oxides
Products of Combustion


Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
of Various Substances


SMALL FIRE: Use DRY chemical powder.
Fire Fighting Media
LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
and Instructions

Not available.
Special Remarks on Fire
Hazards
Special Remarks on Explosion Not available.
Hazards




Section VI. Accidental Release Measures
Absorb with an inert material and put the spilled material in an appropriate waste disposal
Small Spill

Absorb with an inert material and put the spilled material in an appropriate waste disposal. Finish cleaning by
Large Spill
spreading water on the contaminated surface and dispose of according to local and regional authority
requirements. Be careful that the product is not present at a concentration level above TLV. Check TLV on
the MSDS and with local authorities.



Section VII. Handling and Storage
Keep container dry. Keep in a cool place. Ground all equipment containing material. Keep container tightly
Storage
closed. Keep in a cool, well-ventilated place.

Avoid contact with eyes and skin. Avoid breathing vapor or mist.. Keep container closed. Use only with
Handling Procedures and
adequate ventilation. Wash thoroughly after handling. This product has a tendency upon standing to exhibit
Equipment
some crystallization or gelling. If this happens, the product may be re-liquified by agitation and heating at 40 to
50??C.



Section VIII. Exposure Controls/Personal Protection
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below
Engineering Controls
their respective threshold limit value. Ensure that eyewash stations and safety showers are proximal to the
work-station location.
Splash goggles. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent.
Personal Protection
Gloves.
petroleum process oil
TLV / PEL
US: TWA: 5 (mg/m3) from OSHA (PEL)
US: TWA: 5 STEL: 10 (mg/m3) from ACGIH (TLV)


Consult local authorities for acceptable exposure limits.




Continued on Next
Section IX. Physical and Chemical Properties
Amber. Liquid.
Appearance

Not applicable.
Molecular Weight
Not applicable.
pH (1% soln/water)
Not available.
Boiling/Condensation Point
Not available.
Melting Point
0.098 (Water = 1)
Specific Gravity
0.98 Mg/m3 at 15.6??C (60.1??F)
Density
<0.7 mm of Hg (@ 20??C)
Vapor Pressure
The highest known value is 5 (Air = 1) (petroleum process oil).
Vapor Density
Not available.
Volatility
Not available.
Odor
0.01 (petroleum process oil) compared to Butyl acetate.
Evaporation Rate

15 cSt at 100??C
Viscosity

Not available.
Water/Oil Dist. Coeff.
Insoluble in cold water. Soluble in petroleum lubricating bases.
Solubility




Section X. Stability and Reactivity Data
The product is stable.
Stability
Not available.
Instability Temperature
Not available.
Conditions of Instability

Not available.
Incompatibility with Various
Substances
Not available.
Corrosivity


Special Remarks on Reactivity Not available.




Section XI. Toxicological Information
Inhalation. Ingestion. Eye contact. Skin contact.
Routes of Entry

Acute oral toxicity (LD50): >5000 mg/kg [Rat].
Toxicity to Animals
Acute dermal toxicity (LD50): >2000 mg/kg [Rabbit]

Special Remarks on Toxicity to Dermal irritation study of rabbits showed slight irritation.
Eye irritation study of rabbits showed moderate irriation.
Animals

Acute Effects

Moderate eye irritant based on animal data.
Eye Contact

Slight skin irritant based on animal data.
Skin Contact

Not expected to be a skin sensitizer based on animal data.
Sensitization

Not expected to be a significant hazard based on animal data.
Ingestion

Inhalation may be harmful. Inhalation may cause reversible pulmonary injury. Respiratory irregularity and
Inhalation
decreased activity levels were observed.

Continued on Next
Not available.
Remarks


CARCINOGENIC EFFECTS Not available.
:
Chronic Effects on
MUTAGENIC EFFECTS Non-mutagenic for bacteria and/or yeast.
:
Humans
DEVELOPMENTAL TOXICITY Not available.
:
REPRODUCTIVE TOXICITY Not available.
:

Not available.
Remarks




Section XII. Ecological Information
Ecotoxicity in water (LC50): >10 mg/l 96 hours [Fish (Trout)]. 1.5 mg/l 48 hours [Daphnia]. 1.5 mg/l 72
Ecotoxicity
hours [Algae].
Not available.
BOD and CO
Possibly hazardous short term degradation products are not likely. However, long term degradation products
Products of Biodegradation
may arise.
Not available.
Biodegradability


Not available.
Special Remarks on the
Products of Biodegradation



Section XIII. Disposal Considerations
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Waste Information
Not available.
Waste Stream



Section XIV. Transport Information
Not a DOT controlled material (United States).
DOT




Not applicable.
Remarks



Not available.
Maritime transportation




Continued on Next
Section XV. Other Regulatory Information and Pictograms
Not an HCS controlled material in USA.
Classification HCS (USA)


TSCA 8(b) inventory: MOLYVAN? 856B
Federal and State
SARA 311/312 MSDS distribution - chemical inventory - hazard identification:
Regulations
petroleum process oil: fire


Not available.
Remarks

National Fire Protection
Hazardous Material Flammability
1
2
Health Hazard
Association (U.S.A.)
Information System
1 2 0
Fire Hazard Reactivity
(U.S.A.) Health
0
Physical Hazard
Specific hazard
h
Personal Protection



Other regulatory ELINCS: MOLYVAN? 856B
specifications
EINECS: European Inventory. This product contains the following chemical(s) for which one or more
Pre-Market Notifications have been filed. Should you wish to export products containing this product into an
EC country, contact Product Risk Manager at R.T. Vanderbilt, Inc. at 203-853-1400 for more information.

Chemical name: amides, coco, N,N-bis(hydroxyethyl), reaction products with coco monoglycerides and
molybdenum oxide.
CAS No.: 445409-27-8
CEPA DSL: MOLYVAN? 856B

Australia: MOLYVAN 856B

Japan: MOLYVAN? 856B

Korea: MOLYVAN? 856B

China: MOLYVAN? 856B


Protective Clothing
(Pictograms)




Section XVI. Other Information
Not available.
References

Not available.
Other Special
Considerations

Validated by Romana Uzar on 4/4/2007. Verified by Romana Uzar.
Previous Validation Date: 4/25/2005. Printed 4/5/2007.


Information Contact (203) 853-1400
Corporate Risk Management Department

Notice to Reader
Information presented herein has been compiled from sources considered to be dependable and is accurate and reliable to the best of our knowledge
and belief but is not guaranteed to be so. Nothing herein is to be construed as recommending any practice or any product in violation of any patent or
in violation of any law or regulation. It is the user??s responsibility to determine for himself the suitability of any material for a specific purpose and to
adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and, since conditions
of use are not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us.


Amides, coco, N,N-bis(hydroxyethyl) reaction products with coco monoglycerides and molybdenum oxide(MoO3)