Welcome to LookChem.com Sign In | Join Free

CAS No:123456789    This site contains about 108,618 DataSheet documents.

Position: Index > Categories > Semiconductors and Actives
CAS : 50625-53-1
MSDS :
 2,3,3',4'-Tetramethoxybenzophenone, 98%
CAS 
:
 50625-53-1
SYNONYMS 
:
 None.
Catalog of Chemical Suppliers, Buyers, Custom Synthesis Companies And Equipment Manufacturers
[ 2,3,3',4'-Tetramethoxybenzophenone, 98% 50625-53-1 ]
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 50625-53-1 |2,3,3',4'-Tetramethoxybenzophenone | 98.0 | 256-662-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Wash clothing before reuse.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 50625-53-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 108 - 111 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C17H18O5
Molecular Weight: 302.32

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 50625-53-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,3,3',4'-Tetramethoxybenzophenone -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/AD Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 50625-53-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 50625-53-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 50625-53-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/01/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.

2,3,3',4'-TETRAMETHOXYBENZOPHENONE   

Related Product

CAS No.50625-53-1 2,3,3',4'-TETRAMETHOXYBENZOPHENONE

Assay:98%Min Appearance:detailed in specifications Package:according to the clients requirement Storage:Store in dry, dark and ventilated place. Transportation:by air or by ocean shipping Application:An important raw material and intermediate used in Organic Synthesis, Pharmaceuticals 

Min. Order:1Kilogram

Supplier:Dayang Chem (Hangzhou) Co.,Ltd. [ China (Mainland)]

Assessed
Supplier

Tel:+86-571-88938639

Address:9/F, Unit 2 Changdi Torch Building, 259# WenSan Road, Xihu District, Hangzhou City 310012, P.R.China

Contact Suppliers

CAS No.50625-53-1 Methanone,(2,3-dimethoxyphenyl)(3,4-dimethoxyphenyl)-

Assay:99% Application:Fine chemical intermediates, used as the main raw material for he synthesis of various pesticides, medicines, surfactants, polymer monomers, Ond Ontifungal agents 

Min. Order:0

Supplier:Antimex Chemical Limied [ China (Mainland)]

Assessed
Supplier

Tel:0086-21-50563169

Address:Room1027,No.Jinyu Road,Pudong

Contact Suppliers

CAS No.50625-53-1 Methanone,(2,3-dimethoxyphenyl)(3,4-dimethoxyphenyl)-

Assay:98%min Appearance:Off-white to light yellow powder Package:According to the clients requirement. Storage:Keep in cool place. Application:Pharmaceutical intermediates 

Min. Order:0

Supplier:Hangzhou J&H Chemical Co., Ltd. [ China (Mainland)]

Premium
Supplier

Tel:+86-571-87396432

Address:No.200 Zhenhua Rd.Xihu Industrial Park, Hangzhou 310030, China

Contact Suppliers

CAS No.50625-53-1 2,3,3',4'-TETRAMETHOXYBENZOPHENONE

Assay:99%min Appearance:white crystalline powder Package:25KG drum Storage:Store in dry, dark and ventilated place Transportation:by air, by sea, by express Application:intermediate 

Min. Order:0

Supplier:Hangzhou Fandachem Co.,Ltd [ China (Mainland)]

Premium
Supplier

Tel:+86-571-28800458

Address:Room 5010, No.9 YanAn Road,Hangzhou,Zhejiang,China

Contact Suppliers

CAS No.50625-53-1 Methanone,(2,3-dimethoxyphenyl)(3,4-dimethoxyphenyl)-

Assay:99% Appearance:liquid or powder  Package:according to the clients requirement Storage:Dry and Cool Place  Transportation:UPS FedEx ,DHL,EXPRESS LINE Application:API 

Min. Order:1Gram

Supplier:Shandong Mopai Biotechnology Co., LTD [ China (Mainland)]

Premium
Supplier

Tel:+86-15965530500

Address:shandong

Contact Suppliers