Welcome to LookChem.com Sign In | Join Free

CAS No:123456789    This site contains about 108,618 DataSheet documents.

Position: Index > Categories > Semiconductors and Actives
1.
1.1
IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Product identifiers
Product name
Product Number
Brand
CAS-No.
:
:
:
:
Tetraallyl orthosilicate
87563
1067-43-2
1.2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
:
Laboratory chemicals, Manufacture of substances
2.
2.1
2.2
HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes, respiratory system and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word
Hazard statement(s)
H315
H319
H335
Precautionary statement(s)
P261
P305 + P351 + P338
Supplemental Hazard
Statements
- 87563
Warning
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
none
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36/37/38
S-phrase(s)
S26
S36
Irritating to eyes, respiratory system and skin.
In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Wear suitable protective clothing.
2.3
3.
3.1
Other hazards - none
COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms
Formula
Molecular Weight
Component
Tetraallyl orthosilicate
:
:
:
Tetraallyl silicate
Tetraallyloxysilane
Tetrakis(allyloxy)silane
C12H20O4Si
256,37 g/mol
Concentration
CAS-No.
EC-No.
1067-43-2
213-930-9
-
4.
4.1
4.2
4.3
5.
5.1
FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Indication of any immediate medical attention and special treatment needed
no data available
FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large
fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or
spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of
water.
- 87563
5.2
5.3
5.4
6.
6.1
6.2
6.3
6.4
7.
7.1
7.2
7.3
8.
8.1
8.2
Special hazards arising from the substance or mixture
Carbon oxides, silicon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
Use water spray to cool unopened containers.
ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
form explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13). Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.
HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Air and moisture sensitive. Store under inert gas.
Specific end uses
no data available
EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
- 87563
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
9.
9.1
PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a)
b)
c)
d)
e)
f)
g)
h)
Appearance
Odour
Odour Threshold
pH
Melting point/freezing
point
Initial boiling point and
boiling range
Flash point
Evaporation rate
Form: liquid
Colour: colourless
no data available
no data available
no data available
no data available
no data available
83 °C - closed cup
no data available
i)
Flammability (solid, gas) no data available
j)
k)
l)
Upper/lower
flammability or
explosive limits
Vapour pressure
Vapour density
no data available
no data available
no data available
m) Relative density
0,993 g/mL at 20 °C
n)
o)
p)
q)
r)
s)
t)
Water solubility
Partition coefficient: n-
octanol/water
Autoignition
temperature
Decomposition
temperature
Viscosity
Explosive properties
Oxidizing properties
no data available
no data available
no data available
no data available
no data available
no data available
no data available
9.2
10.
10.1
10.2
Other safety information
no data available
STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
- 87563
10.3
10.4
10.5
10.6
11.
11.1
Possibility of hazardous reactions
no data available
Conditions to avoid
Heat, flames and sparks.
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
Ingestion
Skin
Eyes
Additional Information
RTECS: Not available
May be harmful if inhaled. Causes respiratory tract irritation.
May be harmful if swallowed.
May be harmful if absorbed through skin. Causes skin irritation.
Causes serious eye irritation.
12.
12.1
12.2
12.3
12.4
ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
- 87563
12.5
12.6
13.
13.1
14.
14.1
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available
DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
This combustible material may be burned in a chemical incinerator equipped with an afterburner and
scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.
TRANSPORT INFORMATION
UN number
14.2
14.3
14.4
14.5
14.6
15.
ADR/RID: -
UN proper shipping name
ADR/RID:
Not dangerous goods
IMDG:
Not dangerous goods
IATA:
Not dangerous goods
Transport hazard class(es)
ADR/RID: -
Packaging group
ADR/RID: -
Environmental hazards
ADR/RID: no
Special precautions for user
no data available
REGULATORY INFORMATION
IMDG: -
IMDG: -
IMDG: -
IMDG Marine pollutant: no
IATA: -
IATA: -
IATA: -
IATA: no
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1
15.2
16.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available
OTHER INFORMATION
Further information
The above information is believed to be correct but does not purport to be all inclusive and
shall be used only as a guide. The information this document is based on the resent state
of our knowledge and is applicable to the product with regard to appropriate safety precautions.
It does not represent any guarantee of the properties of the product. Lookchem shall not be
held liable for any damage resulting from handling or from contact with the above product.
See reverse side of invoice or packing slip for additional terms and conditions of sale.


TETRAALLYLOXYSILANE   

Related Product

CAS No.1067-43-2 Silicic acid (H4SiO4),tetra-2-propen-1-yl ester Manufacturer/High quality/Best price/In stock

Assay:98% Appearance:detailed see specifications Package:according to the clients requirement Storage:Store in dry, dark and ventilated place. Transportation:by sea or by air Application:It is an important raw material and intermediate used in Organic Synthesis, Pharmaceuticals, Agrochemicals and Dyestuff. 

Min. Order:1Kilogram

Supplier:Dayang Chem (Hangzhou) Co.,Ltd. [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:99% Appearance:Powder Package:based on the bulk quantity Storage:RT Transportation:based on the order quantity Application:Organic Chemicals 

Min. Order:1Metric Ton

Supplier:HENAN NEW BLUE CHEMICAL CO.,LTD [ China (Mainland)]

CAS No.1067-43-2 Tetraallyl orthosilicate

Assay:99% Appearance:powder or liquid Package:according to customer requirements Storage:store in dry dark and ventilated place Transportation:By Sea/Air/Courier Application:It is an important raw material. 

Min. Order:10Gram

Supplier:Zibo Hangyu Biotechnology Development Co., Ltd [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:99% Package:According client's requirements Transportation:by sea/by air/by courier Application:Chemical products 

Min. Order:1Kilogram

Supplier:Hangzhou ZeErRui Chemical Co., Ltd. [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE CAS:1067-43-2

Assay:99% Appearance:Brown powder Package:According to customer requirements Storage:Avoid light, ventilation and shade Transportation:Sea or Air Application:It is an important raw material and intermediate 

Min. Order:1Gram

Supplier:Qingdao Beluga Import and Export Co., LTD [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE 1067-43-2

Assay:>99% Appearance:White Powder Package:In plastic outside weave or according to your request Storage:Room Temprature Transportation:We ship goods via DHL, Fedex, UPS, TNT, China post, NL Post and other couriers, weight from 10g to 1000kg or even bulker.? Application:Tetraallysilane is commonly used in the preparation of organic-inorganic composites and functional coatings. - It can be used as a modifier to enhance the adhesion and heat resistance of polymers. T 

Min. Order:1Kilogram

Supplier:Hebei Nengqian Chemical Import and Export Co., LTD [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:99.0% Appearance:liquid Package:Grams, Kilograms Storage:Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials. Transportation:According to customer request Application:For R&D and commerical use 

Min. Order:100Gram

Supplier:Chemlyte Solutions [ China (Mainland)]

CAS No.1067-43-2 Tetraallyloxysilane

Assay:99% Appearance:Off white to slight yellow solid Package:25kg/drum;200kg/drum Storage:Stored in shaded, cool and dry places Transportation:Sea/air/courier Application:pharma intermediate 

Min. Order:0

Supplier:Antimex Chemical Limied [ China (Mainland)]

CAS No.1067-43-2 Tetraallyloxysilane

Assay:99.90% Appearance:solid or liquid Package:drum and bag Storage:in sealed air resistant place Transportation:by sea or air Application:for pharma use 

Min. Order:0

Supplier:Kono Chem Co.,Ltd [ China (Mainland)]

CAS No.1067-43-2 Tetraallyl orthosilicate

Assay:99% Appearance:White powder Package:200/Kilograms Storage:Sealed and preserved Transportation:By sea Application:Fine chemical intermediates, used as the main raw material for the synthesis of various pesticides, medicines, surfactants, polymer monomers, and antifungal agents 

Min. Order:0

Supplier:GIHI CHEMICALS CO.,LIMITED [ China (Mainland)]

CAS No.1067-43-2 Silicic acid (H4SiO4),tetra-2-propen-1-yl ester

Assay:98%min Appearance:Off-white to light yellow powder Package:According to the clients requirement. Storage:Keep in cool place. Application:Pharmaceutical intermediates 

Min. Order:0

Supplier:Hangzhou J&H Chemical Co., Ltd. [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:99% Min Appearance:Colorless liquid Package:10g, 100g...1kg, 5kg...more Storage:Protected from light, stored hermetically and in a dry place Transportation:By air or sea Application:Used in Synthesis, Pharmaceuticals and other fields 

Min. Order:10Gram

Supplier:HENAN SUNLAKE ENTERPRISE CORPORATION [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANECAS NO.: 1067-43-2

Assay:0.99 Appearance:White solid Package:As required Storage:Room temperature Transportation:By sea or by air Application:Others 

Min. Order:1Gram

Supplier:Henan Wentao Chemical Product Co., Ltd. [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:99% Package:box or opp package Storage:cool drum  Transportation:air or sea Application:TETRAALLYLOXYSILANE 

Min. Order:1Milligram

Supplier:weifang yangxu group co.,ltd [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:97%Min Appearance:Colourless and transparent liquid Package:1KG/bottle or as customer required Storage:Store in a cool, dry, ventilated place Transportation:BY COURIER/AIR/SEA Application:Used in organic synthesis. 

Min. Order:0

Supplier:Kunshan Push Trading Co.,LTD [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:99%+ Appearance:white powder Package:25kg,50kg,180kg,200kg,250kg,1000kg锛宑ustomization Storage:Keep it in dry,shady and cool place Transportation:Transit could be DHL,UPS,TNT,EMS,Fedex,and so on. For mass orders, it will be delivered by air or sea. For small order, please expect 3-7 days by UPS DHL EMS. For mass order, please allow 5-8 days... Application:Pharma;Industry;Agricultural;chemical reaserch 

Min. Order:0

Supplier:Wuhan Circle Star Chem-medical Technology co.,Ltd. [ China (Mainland)]

CAS No.1067-43-2 Top Purity CAS 1067-43-2 with fast shipping

Assay:99% Appearance:White powder Package: [Packaging]20mg, 50mg,100mg,1g,10g,100g,according to customers' requirements Storage: should be stored in a well-closed container at low temperature, keep away from moisture, heat and light. Transportation:1. Samples 1kg-10kg are shipped by international express. 2. 50kg-100kg of goods are transported by dedicated line logistics. 3. Cargo 100kg-1ton is transported by dedicated line logistics. Application:Chemical raw materials, pharmaceutical intermediates, cosmetic raw materials, etc. 

Min. Order:1Kilogram

Supplier:Zhuozhou Wenxi import and Export Co., Ltd [ China (Mainland)]

CAS No.1067-43-2 Tetraallyl orthosilicate

Assay:99% Appearance:White to light yellow to light orange fluffy powder Package:according to your requirement Storage:White to light yellow to light orange fluffy powder Transportation:by air /by train/by sea Application:lab 

Min. Order:1Kilogram

Supplier:Jiangsu Xinsu New Materials Co., Ltd. [ China (Mainland)]

CAS No.1067-43-2 Factory Supply Tetraallyloxysilane

Assay:99% Appearance:powder or granule ( refer to COA) Package:25kgs/fiber drum Storage:Keep in a cool & dry place Transportation:by sea or by air Application:Librium, Valium 

Min. Order:0

Supplier:Ality Chemical Corporation [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:97% Appearance:white crystalline powder Package:according to the clients requirement Storage:Room temperature with sealed well Transportation:by sea or by air Application:Use as primary and secondary intermediate 

Min. Order:0

Supplier:BOC Sciences [ United States]

CAS No.1067-43-2 TETRAALLYLOXYSILANE cas no. 1067-43-2 98%

Assay:0.98 Package:Grams, Kilograms Transportation:According to customer request Application:For R&D 

Min. Order:0

Supplier:Win-Win chemical Co.Ltd [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:98% Application:Materials chemicals 

Min. Order:0

Supplier:SHANDONG BENRITE NEW CHEMICAL MATERIALS CO.,LTD. [ China (Mainland)]

CAS No.1067-43-2 TETRAALLYLOXYSILANE

Assay:99% Application:It is an important raw material. 

Min. Order:0

Supplier:Shandong Mopai Biotechnology Co., LTD [ China (Mainland)]