Bromoacetic acid 79-08-3 Large in supply CAS NO.79-08-3

chemical properties white to light yellow crystalline mass
general description aqueous solution.
air & water reactions water soluble.
reactivity profile carboxylic acids, such as bromoacetic acid, donate hydrogen ions if a base is present to accept them. they react in this way with all bases, both organic (for example, the amines) and inorganic. their reactions with bases, called "neutralizations", are accompanied by the evolution of substantial amounts of heat. neutralization between an acid and a base produces water plus a salt. carboxylic acids with six or fewer carbon atoms are freely or moderately soluble in water; those with more than six carbons are slightly soluble in water. soluble carboxylic acid dissociate to an extent in water to yield hydrogen ions. the ph of solutions of carboxylic acids is therefore less than 7.0. many insoluble carboxylic acids react rapidly with aqueous solutions containing a chemical base and dissolve as the neutralization generates a soluble salt. carboxylic acids in aqueous solution and liquid or molten carboxylic acids can react with active metals to form gaseous hydrogen and a metal salt. such reactions occur in principle for solid carboxylic acids as well, but are slow if the solid acid remains dry. even "insoluble" carboxylic acids may absorb enough water from the air and dissolve sufficiently in bromoacetic acid to corrode or dissolve iron, steel, and aluminum parts and containers. carboxylic acids, like other acids, react with cyanide salts to generate gaseous hydrogen cyanide. the reaction is slower for dry, solid carboxylic acids. insoluble carboxylic acids react with solutions of cyanides to cause the release of gaseous hydrogen cyanide. flammable and/or toxic gases and heat are generated by the reaction of carboxylic acids with diazo compounds, dithiocarbamates, isocyanates, mercaptans, nitrides, and sulfides. carboxylic acids, especially in aqueous solution, also react with sulfites, nitrites, thiosulfates (to give h2s and so3), dithionites (so2), to generate flammable and/or toxic gases and heat. their reaction with carbonates and bicarbonates generates a harmless gas (carbon dioxide) but still heat. like other organic compounds, carboxylic acids can be oxidized by strong oxidizing agents and reduced by strong reducing agents. these reactions generate heat. a wide variety of products is possible. like other acids, carboxylic acids may initiate polymerization reactions; like other acids, they often catalyze (increase the rate of) chemical reactions.
health hazard toxic; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. contact with molten substance may cause severe burns to skin and eyes. reaction with water or moist air will release toxic, corrosive or flammable gases. reaction with water may generate much heat that will increase the concentration of fumes in the air. fire will produce irritating, corrosive and/or toxic gases. runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.
fire hazard combustible material: may burn but does not ignite readily. substance will react with water (some violently) releasing flammable, toxic or corrosive gases and runoff. when heated, vapors may form explosive mixtures with air: indoors, outdoors and sewers explosion hazards. most vapors are heavier than air. they will spread along ground and collect in low or confined areas (sewers, basements, tanks). vapors may travel to source of ignition and flash back. contact with metals may evolve flammable hydrogen gas. containers may explode when heated or if contaminated with water.
bromoacetic acid preparation products and raw materials
preparation products ethyl bromoacetate-->thianaphthene-->rhodanine-3-acetic acid-->7-hydroxy-4-methyl-3-coumarinylacetic acid-->2-methylsulfanyl-pyrimidine-5-carbaldehyde-->2-ethylpyrimidine-5-carbaldehyde-->2-methoxy-pyrimidine-5-carbaldehyde-->2-amino-5-pyrimidinecarboxyaldehyde-->methyl bromoacetate-->ziprasidone-->tri-tert-butyl 1 4 7 10-tetraazacyclodod-->sevoflurane-->pyrrolidin-1-yl-acetic acid-->bromoacetyl chloride
raw materials bromine-->acetic anhydride