- Pincerlike molybdenum complex and preparation method thereof, catalytic composition and application thereof, and alcohol preparation method
-
The invention discloses a clamp-type molybdenum complex, a preparation method, a corresponding catalyst composition and application. The method comprises the steps: obtaining 9 molybdenum complexes with different structures through coordination reaction of 2-(substituent ethyl)-(5, 6, 7, 8-tetrahydroquinolyl) amine and a corresponding carbonyl molybdenum metal precursor; and catalyzing a ketone compound transfer hydrogenation reaction through a molybdenum complex to generate 40 alcohol compounds. The preparation method of the molybdenum complex is simple, high in yield and good in stability. For a transfer hydrogenation reaction of ketone, the molybdenum-based catalytic system has high catalytic activity and small molybdenum loading capacity, is used for production of aromatic and aliphatic alcohols, and has the advantages of simple method, small environmental pollution and high yield.
- -
-
Paragraph 0125-0130
(2021/08/11)
-
- Nickel-Mediated Enantiospecific Silylation via Benzylic C-OMe Bond Cleavage
-
Benzylic stereocenters are found in bioactive and drug molecules, as enantiopure benzylic alcohols have been used to build such a stereogenic center, but are limited to the construction of a C-C bond. Silylation of alkyl alcohols has the potential to build bioactive molecules and building blocks; however, the development of such a process is challenging and unknown. Herein, we describe an unprecedented AgF-assisted nickel catalysis in the enantiospecific silylation of benzylic ethers.
- Balakrishnan, Venkadesh,Murugesan, Vetrivelan,Chindan, Bincy,Rasappan, Ramesh
-
supporting information
p. 1333 - 1338
(2021/02/20)
-
- Amino Acid-Functionalized Metal-Organic Frameworks for Asymmetric Base–Metal Catalysis
-
We report a strategy to develop heterogeneous single-site enantioselective catalysts based on naturally occurring amino acids and earth-abundant metals for eco-friendly asymmetric catalysis. The grafting of amino acids within the pores of a metal-organic framework (MOF), followed by post-synthetic metalation with iron precursor, affords highly active and enantioselective (>99 % ee for 10 examples) catalysts for hydrosilylation and hydroboration of carbonyl compounds. Impressively, the MOF-Fe catalyst displayed high turnover numbers of up to 10 000 and was recycled and reused more than 15 times without diminishing the enantioselectivity. MOF-Fe displayed much higher activity and enantioselectivity than its homogeneous control catalyst, likely due to the formation of robust single-site catalyst in the MOF through site-isolation.
- Newar, Rajashree,Akhtar, Naved,Antil, Neha,Kumar, Ajay,Shukla, Sakshi,Begum, Wahida,Manna, Kuntal
-
supporting information
p. 10964 - 10970
(2021/03/29)
-
- Well-defined Cp*Co(III)-catalyzed Hydrogenation of Carbonates and Polycarbonates
-
We herein report the catalytic hydrogenation of carbonates and polycarbonates into their corresponding diols/alcohols using well-defined, air-stable, high-valent cobalt complexes. Several novel Cp*Co(III) complexes bearing N,O-chelation were isolated for the first time and structurally characterized by various spectroscopic techniques including single crystal X-ray crystallography. These novel Co(III) complexes have shown excellent catalytic activity to produce value added diols/alcohols from carbonate and polycarbonates through hydrogenation using molecular hydrogen as sole reductant or iPrOH as transfer hydrogenation source. To demonstrate the developed methodology's practical applicability, we have recycled the bisphenol A monomer from compact disc (CD) through hydrogenation under the established reaction conditions using phosphine-free, earth-abundant, air- and moisture-stable high-valent cobalt catalysts.
- Dahiya, Pardeep,Gangwar, Manoj Kumar,Sundararaju, Basker
-
p. 934 - 939
(2020/12/15)
-
- Iron-Catalyzed Wacker-type Oxidation of Olefins at Room Temperature with 1,3-Diketones or Neocuproine as Ligands**
-
Herein, we describe a convenient and general method for the oxidation of olefins to ketones using either tris(dibenzoylmethanato)iron(III) [Fe(dbm)3] or a combination of iron(II) chloride and neocuproine (2,9-dimethyl-1,10-phenanthroline) as catalysts and phenylsilane (PhSiH3) as additive. All reactions proceed efficiently at room temperature using air as sole oxidant. This transformation has been applied to a variety of substrates, is operationally simple, proceeds under mild reaction conditions, and shows a high functional-group tolerance. The ketones are formed smoothly in up to 97 % yield and with 100 % regioselectivity, while the corresponding alcohols were observed as by-products. Labeling experiments showed that an incorporated hydrogen atom originates from the phenylsilane. The oxygen atom of the ketone as well as of the alcohol derives from the ambient atmosphere.
- Kataeva, Olga,Kn?lker, Hans-Joachim,Linke, Philipp,Puls, Florian
-
supporting information
p. 14083 - 14090
(2021/05/24)
-
- Controlled reduction of aromaticity of alkylated polyaromatic compounds by selective oxidation using H2WO4, H3PO4and H2O2: a route for upgrading heavy oil fractions
-
Heavy crude oil fractions which form the residues from fractional distillation are a significant proportion of current hydrocarbon reserves. However, processing residues for use as chemicals or fuels is hampered by the high polyaromatic content of this material. Selective reduction of aromaticity by targeted ring opening and the preservation of alkylated chain side groups are key requirements for the upgrading of alkylated polynuclear aromatic hydrocarbons (PAHs) to more easily processed and higher value molecules. In this study, a H2WO4catalyst combined with H3PO4and H2O2oxidant is applied to the selective oxidation of PAHs containing different lengths of substituent alkylated chain, and different numbers of rings in the fused aromatic core. For a model substrate of 2-ethylnaphthalene, using traditional organic solvents, aliphatic carbon was oxidized more readily compared to aromatic carbon. However, it was found that the oxidation to desired products can be specifically controlled as the selectivity is directed by the choice of solvent, with reactions carried out in acetonitrile giving oxidation only in the aromatic region of the molecule. With larger polyaromatic molecules, a biphasic solvent system is used with Aliquat 336 as a phase transfer agent. Even for this more complex reaction system high conversion to the corresponding alkylated ring opened compounds was obtained.
- Francisco, Manuel,Hutchings, Graham J.,Jenkins, Robert L.,Knight, David W.,Nowicka, Ewa,Sankar, Meenakshisundaram,Taylor, Stuart H.,Willock, David J.
-
p. 13885 - 13892
(2021/08/16)
-
- Air Stable Iridium Catalysts for Direct Reductive Amination of Ketones
-
Half-sandwich iridium complexes bearing bidentate urea-phosphorus ligands were found to catalyze the direct reductive amination of aromatic and aliphatic ketones under mild conditions at 0.5 mol % loading with high selectivity towards primary amines. One of the complexes was found to be active in both the Leuckart–Wallach (NH4CO2H) type reaction as well as in the hydrogenative (H2/NH4AcO) reductive amination. The protocol with ammonium formate does not require an inert atmosphere, dry solvents, as well as additives and in contrast to previous reports takes place in hexafluoroisopropanol (HFIP) instead of methanol. Applying NH4CO2D or D2 resulted in a high degree of deuterium incorporation into the primary amine α-position.
- Polishchuk, Iuliia,Sklyaruk, Jan,Lebedev, Yury,Rueping, Magnus
-
supporting information
p. 5919 - 5922
(2021/03/08)
-
- Direct reductive amination of ketones with ammonium salt catalysed by Cp*Ir(iii) complexes bearing an amidato ligand
-
A series of half-sandwich Ir(iii) complexes1-6bearing an amidato bidentate ligand were conveniently synthesized and applied to the catalytic Leuckart-Wallach reaction to produce racemic α-chiral primary amines. With 0.1 mol% of complex1, a broad range of ketones, including aryl ketones, dialkyl ketones, cyclic ketones, α-keto acids, α-keto esters and diketones, could be transformed to their corresponding primary amines with moderate to excellent yields (40%-95%). Asymmetric transformation was also attempted with chiral Ir complexes3-6, and 16% ee of the desired primary amine was obtained. Despite the unsatisfactory enantio-control achieved so far, the current exploration might stimulate more efforts towards the discovery of better chiral catalysts for this challenging but important transformation.
- Dai, Zengjin,Pan, Ying-Min,Wang, Shou-Guo,Yin, Qin,Zhang, Xumu
-
supporting information
p. 8934 - 8939
(2021/11/04)
-
- Synthesis and catalytic activity of N-heterocyclic silylene (NHSi) iron (II) hydride for hydrosilylation of aldehydes and ketones
-
A novel silylene supported iron hydride [Si, C]FeH (PMe3)3 (1) was synthesized by C (sp3)-H bond activation with zero-valent iron complex Fe (PMe3)4. Complex 1 was fully characterized by spectroscopic methods and single crystal X-ray diffraction analysis. To the best of our knowledge, 1 is the first example of silylene-based hydrido chelate iron complex produced through activation of the C (sp3)?H bond. It was found that complex 1 exhibited excellent catalytic activity for hydrosilylation of aldehydes and ketones. The catalytic system showed good tolerance and catalytic activity for the substrates with different functional groups on the benzene ring. It is worth mentioning that, the experimental results showed that both ketones and aldehydes could be reduced in good to excellent yields under the same catalytic conditions. Based on the experiments and literature reports, a possible catalytic mechanism was proposed.
- Du, Xinyu,Qi, Xinghao,Li, Kai,Li, Xiaoyan,Sun, Hongjian,Fuhr, Olaf,Fenske, Dieter
-
-
- MATERIALS COMPRISING CARBON-EMBEDDED COBALT NANOPARTICLES, PROCESSES FOR THEIR MANUFACTURE, AND USE AS HETEROGENEOUS CATALYSTS
-
The present invention relates to catalytically active material, comprising grains of non-graphitizing carbon with cobalt nanoparticles dispersed therein, wherein dP, the average diameter of cobalt nanoparticles in the non-graphitizing carbon grains, is in the range of 1 nm to 20 nm, D, the average distance between cobalt nanoparticles in the non-graphitizing carbon grains, is in the range of 2 nm to 150 nm, and ω, the combined total mass fraction of metal in the non-graphitizing carbon grains, is in the range of 30 wt% to 70 wt% of the total mass of the non-graphitizing carbon grains, and wherein dP, D and ω conform to the following relation: 4.5 dP / ω > D ≥ 0.25 dP / ω. The present invention, further, relates to a process for the manufacture of material according to the invention, as well as its use as a catalyst.
- -
-
Page/Page column 17; 18
(2021/03/13)
-
- Dynamic Kinetic Resolution of Alcohols by Enantioselective Silylation Enabled by Two Orthogonal Transition-Metal Catalysts
-
A nonenzymatic dynamic kinetic resolution of acyclic and cyclic benzylic alcohols is reported. The approach merges rapid transition-metal-catalyzed alcohol racemization and enantioselective Cu-H-catalyzed dehydrogenative Si-O coupling of alcohols and hydrosilanes. The catalytic processes are orthogonal, and the racemization catalyst does not promote any background reactions such as the racemization of the silyl ether and its unselective formation. Often-used ruthenium half-sandwich complexes are not suitable but a bifunctional ruthenium pincer complex perfectly fulfills this purpose. By this, enantioselective silylation of racemic alcohol mixtures is achieved in high yields and with good levels of enantioselection.
- Oestreich, Martin,Seliger, Jan
-
supporting information
p. 247 - 251
(2020/10/29)
-
- Visible Light Induced Reduction and Pinacol Coupling of Aldehydes and Ketones Catalyzed by Core/Shell Quantum Dots
-
We present an efficient and versatile visible light-driven methodology to transform aryl aldehydes and ketones chemoselectively either to alcohols or to pinacol products with CdSe/CdS core/shell quantum dots as photocatalysts. Thiophenols were used as proton and hydrogen atom donors and as hole traps for the excited quantum dots (QDs) in these reactions. The two products can be switched from one to the other simply by changing the amount of thiophenol in the reaction system. The core/shell QD catalysts are highly efficient with a turn over number (TON) larger than 4 × 104 and 4 × 105 for the reduction to alcohol and pinacol formation, respectively, and are very stable so that they can be recycled for at least 10 times in the reactions without significant loss of catalytic activity. The additional advantages of this method include good functional group tolerance, mild reaction conditions, the allowance of selectively reducing aldehydes in the presence of ketones, and easiness for large scale reactions. Reaction mechanisms were studied by quenching experiments and a radical capture experiment, and the reasons for the switchover of the reaction pathways upon the change of reaction conditions are provided.
- Xi, Zi-Wei,Yang, Lei,Wang, Dan-Yan,Feng, Chuan-Wei,Qin, Yufeng,Shen, Yong-Miao,Pu, Chaodan,Peng, Xiaogang
-
p. 2474 - 2488
(2021/02/05)
-
- Reaction of Diisobutylaluminum Borohydride, a Binary Hydride, with Selected Organic Compounds Containing Representative Functional Groups
-
The binary hydride, diisobutylaluminum borohydride [(iBu)2AlBH4], synthesized from diisobutylaluminum hydride (DIBAL) and borane dimethyl sulfide (BMS) has shown great potential in reducing a variety of organic functional groups. This unique binary hydride, (iBu)2AlBH4, is readily synthesized, versatile, and simple to use. Aldehydes, ketones, esters, and epoxides are reduced very fast to the corresponding alcohols in essentially quantitative yields. This binary hydride can reduce tertiary amides rapidly to the corresponding amines at 25 °C in an efficient manner. Furthermore, nitriles are converted into the corresponding amines in essentially quantitative yields. These reactions occur under ambient conditions and are completed in an hour or less. The reduction products are isolated through a simple acid-base extraction and without the use of column chromatography. Further investigation showed that (iBu)2AlBH4 has the potential to be a selective hydride donor as shown through a series of competitive reactions. Similarities and differences between (iBu)2AlBH4, DIBAL, and BMS are discussed.
- Amberchan, Gabriella,Snelling, Rachel A.,Moya, Enrique,Landi, Madison,Lutz, Kyle,Gatihi, Roxanne,Singaram, Bakthan
-
supporting information
p. 6207 - 6227
(2021/05/06)
-
- Manganese-catalyzed homogeneous hydrogenation of ketones and conjugate reduction of α,β-unsaturated carboxylic acid derivatives: A chemoselective, robust, and phosphine-free in situ-protocol
-
We communicate a user-friendly and glove-box-free catalytic protocol for the manganese-catalyzed hydrogenation of ketones and conjugated C[dbnd]C[sbnd]bonds of esters and nitriles. The respective catalyst is readily assembled in situ from the privileged [Mn(CO)5Br] precursor and cheap 2-picolylamine. The catalytic transformations were performed in the presence of t-BuOK whereby the corresponding hydrogenation products were obtained in good to excellent yields. The described system offers a brisk and atom-efficient access to both secondary alcohols and saturated esters avoiding the use of oxygen-sensitive and expensive phosphine-based ligands.
- Topf, Christoph,Vielhaber, Thomas
-
-
- Reduction of carbonyl compounds via hydrosilylation catalyzed by well-defined PNP-Mn(I) hydride complexes
-
Reduction reactions of unsaturated compounds are fundamental transformations in synthetic chemistry. In this context, the reduction of polarized double bonds such as carbonyl or C=C motifs can be achieved by hydrogenation reactions. We describe here a highly chemoselective Mn(I)-based PNP pincer catalyst for the hydrosilylation of aldehydes and ketones employing polymethylhydrosiloxane (PMHS) as inexpensive hydrogen donor. Graphic abstract: [Figure not available: see fulltext.]
- Weber, Stefan,Iebed, Dina,Glatz, Mathias,Kirchner, Karl
-
p. 635 - 639
(2021/06/17)
-
- Manganese-Catalyzed Hydrogenation of Ketones under Mild and Base-free Conditions
-
In this paper, several Mn(I) complexes were applied as catalysts for the homogeneous hydrogenation of ketones. The most active precatalyst is the bench-stable alkyl bisphosphine Mn(I) complex fac-[Mn(dippe) (CO)3(CH2CH2CH3)]. The reaction proceeds at room temperature under base-free conditions with a catalyst loading of 3 mol % and a hydrogen pressure of 10 bar. A temperature-dependent selectivity for the reduction of α,β-unsaturated carbonyls was observed. At room temperature, the carbonyl group was selectively hydrogenated, while the C=C bond stayed intact. At 60 °C, fully saturated systems were obtained. A plausible mechanism based on DFT calculations which involves an inner-sphere hydride transfer is proposed.
- Brünig, Julian,Kirchner, Karl,Veiros, Luis F.,Weber, Stefan
-
supporting information
p. 1388 - 1394
(2021/05/31)
-
- Ambient-pressure highly active hydrogenation of ketones and aldehydes catalyzed by a metal-ligand bifunctional iridium catalyst under base-free conditions in water
-
A green, efficient, and high active catalytic system for the hydrogenation of ketones and aldehydes to produce corresponding alcohols under atmospheric-pressure H2 gas and ambient temperature conditions was developed by a water-soluble metal–ligand bifunctional catalyst [Cp*Ir(2,2′-bpyO)(OH)][Na] in water without addition of a base. The catalyst exhibited high activity for the hydrogenation of ketones and aldehydes. Furthermore, it was worth noting that many readily reducible or labile functional groups in the same molecule, such as cyan, nitro, and ester groups, remained unchanged. Interestingly, the unsaturated aldehydes can be also selectively hydrogenated to give corresponding unsaturated alcohols with remaining C=C bond in good yields. In addition, this reaction could be extended to gram levels and has a large potential of wide application in future industrial.
- Wang, Rongzhou,Yue, Yuancheng,Qi, Jipeng,Liu, Shiyuan,Song, Ao,Zhuo, Shuping,Xing, Ling-Bao
-
-
- Application of nitrogen-containing heterocyclic mercaptan cuprous compound in photocatalytic reaction of carbonyl compound
-
The invention discloses an application of a nitrogen-containing heterocyclic mercaptan cuprous compound in a photocatalytic reaction of a carbonyl compound, relates to the technical field of application of photocatalysts; in particular, photocatalytic reduction reaction is carried out on the carbonyl compound by adopting the nitrogen-containing heterocyclic mercaptan cuprous compound as a photocatalyst to prepare an alcohol compound. The nitrogen-containing heterocyclic mercaptan cuprous compound is used as the photocatalyst for the photocatalytic reduction reaction of the carbonyl compound, visible light is successfully catalyzed to induce reduction of the carbonyl compound into the alcohol compound, the catalyst is low in price and good in catalytic effect, and the production cost can be reduced.
- -
-
Paragraph 0013; 0040-0041
(2021/06/06)
-
- Method for synthesizing secondary alcohol in water phase
-
The invention discloses a method for synthesizing secondary alcohol in a water phase. The method comprises the following steps: taking ketone as a raw material, selecting water as a solvent, and carrying out catalytic hydrogenation reaction on the ketone in the presence of a water-soluble catalyst to obtain the secondary alcohol, wherein the catalyst is a metal iridium complex [Cp * Ir (2, 2'-bpyO)(OH)][Na]. Water is used as the solvent, so that the use of an organic solvent is avoided, and the method is more environment-friendly; the reaction is carried out at relatively low temperature and normal pressure, and the reaction conditions are mild; alkali is not needed in the reaction, so that generation of byproducts is avoided; and the conversion rate of the raw materials is high, and the yield of the obtained product is high. The method not only has academic research value, but also has a certain industrialization prospect.
- -
-
Paragraph 0037-0038
(2021/07/14)
-
- Synthesis, Structure, and Catalytic Hydrogenation Activity of [NO]-Chelate Half-Sandwich Iridium Complexes with Schiff Base Ligands
-
A series of N,O-coordinate iridium(III) complexes with a half-sandwich motif bearing Schiff base ligands for catalytic hydrogenation of nitro and carbonyl substrates have been synthesized. All iridium complexes showed efficient catalytic activity for the hydrogenation of ketones, aldehydes, and nitro-containing compounds using clean H2 as reducing reagent. The iridium catalyst displayed the highest TON values of 960 and 950 in the hydrogenation of carbonyl and nitro substrates, respectively. Various types of substrates with different substituted groups afforded corresponding products in excellent yields. All N,O-coordinate iridium(III) complexes 1-4 were well characterized by IR, NMR, HRMS, and elemental analysis. The molecular structure of complex 1 was further characterized by single-crystal X-ray determination.
- Lv, Wen-Rui,Li, Rong-Jian,Liu, Zhen-Jiang,Jin, Yan,Yao, Zi-Jian
-
p. 8181 - 8188
(2021/05/26)
-
- Mechanistic Studies on the Hexadecafluorophthalocyanine–Iron-Catalyzed Wacker-Type Oxidation of Olefins to Ketones**
-
The hexadecafluorophthalocyanine–iron complex FePcF16 was recently shown to convert olefins into ketones in the presence of stoichiometric amounts of triethylsilane in ethanol at room temperature under an oxygen atmosphere. Herein, we describe an extensive mechanistic investigation for the conversion of 2-vinylnaphthalene into 2-acetylnaphthalene as model reaction. A variety of studies including deuterium- and 18O2-labeling experiments, ESI-MS, and 57Fe M?ssbauer spectroscopy were performed to identify the intermediates involved in the catalytic cycle of the oxidation process. Finally, a detailed and well-supported reaction mechanism for the FePcF16-catalyzed Wacker-type oxidation is proposed.
- Grinenko, Vadim,Klau?, Hans-Henning,Kn?lker, Hans-Joachim,Puls, Florian,Seewald, Felix
-
supporting information
p. 16776 - 16787
(2021/11/04)
-
- 1-D manganese(ii)-terpyridine coordination polymers as precatalysts for hydrofunctionalisation of carbonyl compounds
-
Reductive catalysis with earth-abundant metals is currently of increasing importance and shows potential in replacing precious metal catalysis. In this work, we revealed catalytic hydroboration and hydrosilylation of ketones and aldehydes achieved by a structurally defined manganese(ii) coordination polymer (CP) as a precatalyst under mild conditions. The manganese-catalysed methodology can be applied to a range of functionalized aldehydes and ketones with turnover numbers (TON) of up to 990. Preliminary results on the regioselective catalytic hydrofunctionalization of styrenes by the Mn-CP catalyst are also presented.
- Johnson, Jahvon,Li, Sihan,Mo, Zixuan,Neary, Michelle C.,Zeng, Haisu,Zhang, Guoqi,Zheng, Shengping
-
supporting information
p. 2610 - 2615
(2020/03/05)
-
- Palladium-Catalyzed Selective Reduction of Carbonyl Compounds
-
Two new examples of structurally characterized β-diketiminate analogues i.e., conjugated bis-guanidinate (CBG) supported palladium(II) complexes, [LPdX]2; [L= {(ArHN)(ArN)–C=N–C=(NAr)(NHAr)}; Ar = 2,6-Et2-C6H3], X = Cl (1), Br (2) have been reported. The synthesis of complexes 1–2 was achieved by two methods. Method A involves deprotonation of LH by nBuLi followed by the treatment of LLi (insitu formed) with PdCl2 in THF, which afforded compound 1 in good yield (75 %). In Method B, the reaction between free LH and PdX2 (X = Cl or Br) in THF allowed the formation of complexes 1 (Yield 73 %) and 2 (Yield 52 %), respectively. Moreover, these complexes were characterized thoroughly by several spectroscopic techniques (1H, 13C NMR, UV/Vis, FT-IR, and HRMS), including single-crystal X-ray structural and elemental analyses. In addition, we tested the catalytic activity of these complexes 1–2 for the hydroboration of carbonyl compounds with pinacolborane (HBpin). We observed that compound 1 exhibits superior catalytic activity when compared to 2. Compound 1 efficiently catalyzes various aldehydes and ketones under solvent-free conditions. Furthermore, both inter- and intramolecular chemoselectivity hydroboration of aldehydes over other functionalities have been established.
- Sarkar, Nabin,Mahato, Mamata,Nembenna, Sharanappa
-
p. 2295 - 2301
(2020/05/18)
-
- Synthesis and Reactivity of Fluorinated Triaryl Aluminum Complexes
-
The addition of the Grignard 3,4,5-ArFMgBr to aluminum(III) chloride in ether generates the novel triarylalane Al(3,4,5-ArF)3·OEt2. Attempts to synthesize this alane via transmetalation from the parent borane with trimethylaluminum gave a dimeric structure with bridging methyl groups, a product of partial transmetalation. On the other hand, the novel alane Al(2,3,4-ArF)3 was synthesized from the parent borane and trimethylaluminum. Interestingly, the solid-state structure of Al(2,3,4-ArF)3 shows an extended chain structure resulting from neighboring Al···F contacts. Al(3,4,5-ArF)3·OEt2 was then found to be an effective catalyst for the hydroboration of carbonyls, imines, and alkynes with pinacolborane.
- Ould, Darren M. C.,Carden, Jamie L.,Page, Rowan,Melen, Rebecca L.
-
supporting information
p. 14891 - 14898
(2020/10/02)
-
- Lithium Bromide/HBpin: A Mild and Effective Catalytic System for the Selective Hydroboration of Aldehydes and Ketones
-
The catalytic hydroboration of aldehydes and ketones with HBpin was examined using simple and commercially available metal salts (Li, Na, and K). Among the tested salts, LiBr (0.5–1.0 mol%) was found to be an efficient catalyst for the hydroboration of various aldehydes and ketones at room temperature. Further, the chemoselective hydroboration of aldehydes over ketones was also demonstrated.
- An, Duk Keun,Choi, Hyeon Seong,Hwang, Hyonseok,Kim, Hanbi,Lee, Ji Hye,Shin, Hye Lim,Yi, Jaeeun
-
p. 1009 - 1018
(2020/10/12)
-
- Erratum: Redox-Noninnocent Ligand-Supported Vanadium Catalysts for the Chemoselective Reduction of C=X (X = O, N) Functionalities (Journal of the American Chemical Society (2019) 141:38 (15230-15239) DOI: 10.1021/jacs.9b07062)
-
Pages 15232, 15233, and 15236. In the original paper, the doublet wave functions for 21 and 21a/21b were incorrectly (Figure Presented). reported as spin-contaminated in sections 2.3 and 2.8 (Figure 3 and Scheme 9, respectively.) This comes from the incorrectly reported expected eigenvalue of 0.75 for the spin-squared operator ??2? for the antiferromagnetically coupled doublet |↓?L|↑↑?V state (originally given in the Supporting Information). The correct expected eigenvalue for the |↓?L|↑↑?V state should be 1.75. The wave functions for 21 and 21a/21b (eigenvalues 1.79 and 1.77/1.66, respectively) are therefore not spincontaminated. The corrected Figure 3 and Scheme 9 are presented below. A corrected Supporting Information file is also provided. The corrections do not affect any of the conclusions of the Article, but slightly decrease the gap between the quartet and doublet spin surfaces. Scheme 3 has been also corrected to reflect the fact that (CH3)3SiCH2 ? radicals can only react based on spin conservation.
- Zhang, Guoqi,Wu, Jing,Zheng, Shengping,Neary, Michelle C.,Mao, Jincheng,Flores, Marco,Trovitch, Ryan J.,Dub, Pavel A.
-
supporting information
p. 16507 - 16509
(2020/10/14)
-
- Capturing the Monomeric (L)CuH in NHC-Capped Cyclodextrin: Cavity-Controlled Chemoselective Hydrosilylation of α,β-Unsaturated Ketones
-
The encapsulation of copper inside a cyclodextrin capped with an N-heterocyclic carbene (ICyD) allowed both to catch the elusive monomeric (L)CuH and a cavity-controlled chemoselective copper-catalyzed hydrosilylation of α,β-unsaturated ketones. Remarkably, (α-ICyD)CuCl promoted the 1,2-addition exclusively, while (β-ICyD)CuCl produced the fully reduced product. The chemoselectivity is controlled by the size of the cavity and weak interactions between the substrate and internal C?H bonds of the cyclodextrin.
- Bistri-Aslanoff, Olivia,Derat, Etienne,Leloux, Sébastien,Leyssens, Tom,Ménand, Micka?l,Meijide Suárez, Jorge,Riant, Olivier,Roland, Sylvain,Sollogoub, Matthieu,Xu, Guangcan,Zhang, Pinglu,Zhang, Yongmin
-
supporting information
p. 7591 - 7597
(2020/03/23)
-
- Benzimidazole fragment containing Mn-complex catalyzed hydrosilylation of ketones and nitriles
-
The synthesis of a new bidentate (NN)–Mn(I) complex is reported and its catalytic activity towards the reduction of ketones and nitriles is studied. On comparing the reactivity of various other Mn(I) complexes supported by benzimidazole ligand, it was observed that the Mn(I) complexes bearing 6-methylpyridine and benzimidazole fragments exhibited the highest catalytic activity towards monohydrosilylation of ketones and dihydrosilylation of nitriles. Using this protocol, a wide range of ketones were selectively reduced to the corresponding silyl ethers. In case of unsaturated ketones, the chemoselective reduction of carbonyl group over olefinic bonds was observed. Additionally, selective dihydrosilylation of several nitriles were also achieved using this complex. Mechanistic investigations with radical scavengers suggested the involvement of radical species during the catalytic reaction. Stoichiometric reaction of the Mn(I) complex with phenylsilane revealed the formation of a new Mn(I) complex.
- Ganguli, Kasturi,Mandal, Adarsha,Sarkar, Bidisha,Kundu, Sabuj
-
supporting information
(2020/08/13)
-
- Bottleable NiCl2(dppe) as a catalyst for the Markovnikov-selective hydroboration of styrenes with bis(pinacolato)diboron
-
Although transition-metal-catalysed hydroboration reactions of alkenes have been extensively studied, only three examples using Ni complexes have been reported so far. In this study, we have examined hydroboration reactions of alkenes using Ni/phosphine complexes. The commercially available and bottleable complex NiCl2(dppe) (dppe = 1,2-bis(diphenylphosphino)ethane) serves as a catalyst for the highly Markovnikov-selective hydroboration of styrene derivatives that affords the desired Markovnikov products in high yield.
- Hashimoto, Toru,Ishimaru, Toshiya,Shiota, Keisuke,Yamaguchi, Yoshitaka
-
supporting information
p. 11701 - 11704
(2020/10/20)
-
- The Cyclopropane Ring as a Reporter of Radical Leaving-Group Reactivity for Ni-Catalyzed C(sp3)-O Arylation
-
The ability to understand and predict reactivity is essential for the development of new reactions. In the context of Ni-catalyzed C(sp3)-O functionalization, we have developed a unique strategy employing activated cyclopropanols to aid the design and optimization of a redox-active leaving group for C(sp3)-O arylation. In this chemistry, the cyclopropane ring acts as a reporter of leaving-group reactivity, since the ring-opened product is obtained under polar (2e) conditions, and the ring-closed product is obtained under radical (1e) conditions. Mechanistic studies demonstrate that the optimal leaving group is redox-active and are consistent with a Ni(I)/Ni(III) catalytic cycle. The optimized reaction conditions are also used to synthesize a number of arylcyclopropanes, which are valuable pharmaceutical motifs.
- Mills, L. Reginald,Monteith, John J.,Dos Passos Gomes, Gabriel,Aspuru-Guzik, Alán,Rousseaux, Sophie A. L.
-
supporting information
p. 13246 - 13254
(2020/09/01)
-
- Method for preparing alcohol compounds through hydrogenation reduction of ketone and aldehyde
-
The invention belongs to the technical field of medical and natural compound chemical intermediates and related chemistry, and provides a method for preparing alcohol compounds through a hydrogenationreduction of ketone and aldehyde. Ketone, aldehyde and derivatives thereof, which are used as raw materials, are subjected to hydrogenation reduction with nano-porous palladium as a catalyst and hydrogen as a hydrogen source, wherein the pressure of hydrogen is 0.1-0.5 MPa, the molar concentration of the ketone, aldehyde and derivatives thereof in the solvent is 0.01-2 mmol/m, the pore skeleton size of the adopted catalyst is 1-50 nm, and the molar ratio of ketone, aldehyde and derivatives thereof to the catalyst is 1:0.01 to 1:0.5. The method has the advantages of high product yield, very mild reaction conditions, simplicity in operation and post-treatment, good repeatability of the catalyst, no obvious reduction of the catalytic effect after the catalyst is used for many times, and provision of the possibility for industrialization.
- -
-
Paragraph 0007; 0070-0074
(2020/02/14)
-
- N-Heterocyclic Carbene (NHC)-Stabilized Ru0 Nanoparticles: In Situ Generation of an Efficient Transfer Hydrogenation Catalyst
-
Tethered and untethered ruthenium half-sandwich complexes were synthesized and characterized spectroscopically. X-ray crystallographic analysis of three untethered and two tethered Ru N-heterocyclic carbene (NHC) complexes were also carried out. These RuNHC complexes catalyze transfer hydrogenation of aromatic ketones in 2-propanol under reflux, optimally in the presence of (25 mol %) KOH. Under these conditions, the formation of 2–3 nm-sized Ru0 nanoparticles was detected by TEM measurements. A solid-state NMR investigation of the nanoparticles suggested that the NHC ligands were bound to the surface of the Ru nanoparticles (NPs). This base-promoted route to NHC-stabilized ruthenium nanoparticles directly from arene-tethered ruthenium–NHC complexes and from untethered ruthenium–NHC complexes is more convenient than previously known routes to NHC-stabilized Ru nanocatalysts. Similar catalytically active RuNPs were also generated from the reaction of a mixture of [RuCl2(p-cymene)]2 and the NHC precursor with KOH in isopropanol under reflux. The transfer hydrogenation catalyzed by these NHC-stabilized RuNPs possess a high turnover number. The catalytic efficiency was significantly reduced if nanoparticles were exposed to air or allowed to aggregate and precipitate by cooling the reaction mixtures during the reaction.
- Kathuria, Lakshay,Din Reshi, Noor U.,Samuelson, Ashoka G.
-
supporting information
p. 7622 - 7630
(2020/05/29)
-
- Efficient Transfer Hydrogenation of Ketones Catalyzed by a Phosphine-Free Cobalt-NHC Complex
-
A simple phosphine-free cobalt-NHC pincer complex has been synthesized and utilized for the transfer hydrogenation of ketones with 2-propanol as hydrogen donor. A broad range of ketones varying from aromatic, aliphatic and heterocyclic were effectively reduced to their corresponding alcohols in moderate to excellent yields with good tolerance of functional groups.
- Ibrahim, Jessica Juweriah,Reddy, C. Bal,Fang, Xiaolong,Yang, Yong
-
p. 4429 - 4432
(2020/07/04)
-
- Group 6 Metal Carbonyl Complexes Supported by a Bidentate PN Ligand: Syntheses, Characterization, and Catalytic Hydrogenation Activity
-
We report on the preparation of a series of phosphorus-nitrogen donor ligand complexes [M(CO)4(PN)], where M = Cr, Mo, W and PN is 2-(diphenylphosphino)ethylamine. The organometallic compounds were readily obtained upon reacting the respective metal hexacarbonyls with equimolar amounts of the pertinent ligand in the presence of tetraethylammonium bromide. The PN-ligated metal carbonyls were fully characterized by standard spectroscopic techniques and X-ray crystallography. The ability of the title compounds to function as homogeneous hydrogenation catalysts was probed in the reduction of acetophenone and benzaldehyde derivatives to yield the corresponding alcohols. The reaction setup was easily assembled by simply combining the components in the autoclave on the bench outside an inert-gas-operated glovebox system.
- Faust, Kirill,Topf, Christoph,Vielhaber, Thomas
-
p. 4535 - 4543
(2020/12/23)
-
- Transfer Hydrogenation of Ketones and Imines with Methanol under Base-Free Conditions Catalyzed by an Anionic Metal-Ligand Bifunctional Iridium Catalyst
-
An anionic iridium complex [Cp*Ir(2,2′-bpyO)(OH)][Na] was found to be a general and highly efficient catalyst for transfer hydrogenation of ketones and imines with methanol under base-free conditions. Readily reducible or labile substituents, such as nitro, cyano, and ester groups, were tolerated under present reaction conditions. Notably, this study exhibits the unique potential of anionic metal-ligand bifunctional iridium catalysts for transfer hydrogenation with methanol as a hydrogen source.
- Han, Xingyou,Li, Feng,Liu, Peng,Wang, Rongzhou,Xu, Jing
-
p. 2242 - 2249
(2020/03/13)
-
- Efficient Transfer Hydrogenation of Ketones using Methanol as Liquid Organic Hydrogen Carrier
-
Herein, we demonstrate an efficient protocol for transfer hydrogenation of ketones using methanol as practical and useful liquid organic hydrogen carrier (LOHC) under Ir(III) catalysis. Various ketones, including electron-rich/electron-poor aromatic ketones, heteroaromatic and aliphatic ketones, have been efficiently reduced into their corresponding alcohols. Chemoselective reduction of ketones was established in the presence of various other reducible functional groups under mild conditions.
- Garg, Nidhi,Paira, Soumen,Sundararaju, Basker
-
p. 3472 - 3476
(2020/05/29)
-
- Super electron donor-mediated reductive desulfurization reactions
-
The desulfurization of thioacetals and thioethers by a pyridine-derived electron donor is described. This methodology provides efficient access to the reduced products in high yields and does not require the use of transition-metals, elemental alkali-metals, or hydrogen atom donors.
- Nozawa-Kumada, Kanako,Ito, Shungo,Noguchi, Koto,Shigeno, Masanori,Kondo, Yoshinori
-
supporting information
p. 12968 - 12971
(2019/11/05)
-
- N-Doped carbon nanofibers derived from bacterial cellulose as an excellent metal-free catalyst for selective oxidation of arylalkanes
-
N-Doped carbon nanofibers derived from one-step pyrolysis of low-cost bacterial cellulose with the assistance of urea were reported. Owing to their interconnected nanofibrous structure and high specific surface area as well as high N doping, they exhibited excellent catalytic performance for selective oxidation of arylalkanes even with O2 as an oxidant in aqueous solution.
- Huang, Runkun,Cao, Changyan,Liu, Jian,Sun, Dongping,Song, Weiguo
-
supporting information
p. 1935 - 1938
(2019/05/02)
-
- Synthetic Versatility of Lipases: Application for Si-O Bond Formation and Cleavage
-
Several commercially available lipases were examined in a study on O-Si bond formation and cleavage applying silicon-based protecting groups and alcohols or the corresponding silyl ethers. With regard to deprotection, from silyl ether to the corresponding alcohol, only the solvent and the lipase were necessary. The influence of the protecting group, the lipase source, and the substituent was investigated to optimize the results. The TMS moiety could be removed in 24 hours of reaction at room temperature in aqueous systems (conv. up to 99%, depending on the substrate and lipase). The reverse reactions, that is, with the protection of the alcohols, were carried out in hexane using different silyl chlorides. The TMS, TES, and TBS moieties were successfully inserted in the primary and secondary alcohols without the need for dry conditions or an inert atmosphere, presenting conversions of up to 99%, depending on the substrate.
- Brondani, Patrícia Bulegon,Mittersteiner, Mateus,Voigt, Morgana Aline,Klinkowski, Bruna Heloisa,Riva Scharf, Dilamara,De Jesus, Paulo Cesar
-
supporting information
p. 477 - 485
(2019/01/10)
-
- Practical and selective hydroboration of aldehydes and ketones in air catalysed by an iron(ii) coordination polymer
-
The in air catalytic hydroboration of ketones and aldehydes with pinacolborane by an iron(ii) coordination polymer (CP) is carried out under mild and solvent-free conditions. The precatalyst is highly active towards a wide range of substrates including functionalized ketones and aldehydes in the presence of KOtBu as an activator, achieving a high turnover number (TON) of up to 9500. Excellent chemoselectivity to aldehydes over ketones was also revealed, which is in sharp contrast with the results obtained under inert atmosphere using the same catalyst system. This catalyst observed here is not only highly efficient but also recyclable for reuse for at least 5 times without losing its effectiveness.
- Zhang, Guoqi,Cheng, Jessica,Davis, Kezia,Bonifacio, Mary Grace,Zajaczkowski, Cynthia
-
p. 1114 - 1121
(2019/03/12)
-
- Iron complex containing meta-carborane triazole ligand, preparation and application thereof
-
The invention relates to an iron complex containing a meta-carborane triazole ligand, preparation and application thereof. The preparation method of the iron complex includes the steps of: 1) adding an n-BuLi solution into a meta-carborane solution, and then carrying out reaction at room temperature for 30-60min; 2) adding 3-propargyl bromide, carrying out reaction at room temperature for 2-4h, then pumping out the solvent, and carrying out recrystallization to obtain 1, 3-dipropargyl meta-carborane; 3) dissolving 1, 3-dipropargyl meta-carborane, aryl azide and a catalyst in an organic solvent, and then carrying out reaction at room temperature for 3-6h; and 4) adding FeCl2, carrying out reaction at room temperature for 5-8h, and then performing separation. The iron complex is used for catalytic oxidation of aromatic hydrocarbon to synthesize aromatic alcohol. Compared with the prior art, the invention adopts one-pot method to obtain the iron complex containing the meta-carborane triazole ligand, the synthesis process is simple and green, and the iron complex can achieve efficient catalytic oxidation of aromatic hydrocarbon to prepare an aromatic alcohol compound under the condition that hydrogen peroxide serves as an oxidizing agent.
- -
-
Paragraph 0093-0096
(2020/01/12)
-
- Reductive amination of ketonic compounds catalyzed by Cp*Ir(III) complexes bearing a picolinamidato ligand
-
Cp*Ir complexes bearing a 2-picolinamide moiety serve as effective catalysts for the direct reductive amination of ketonic compounds to give primary amines under transfer hydrogenation conditions using ammonium formate as both the nitrogen and hydrogen source. The clean and operationally simple transformation proceeds with a substrate to catalyst molar ratio (S/C) of up to 20,000 at relatively low temperature and exhibits excellent chemoselectivity toward primary amines.
- Tanaka, Kouichi,Miki, Takashi,Murata, Kunihiko,Yamaguchi, Ayumi,Kayaki, Yoshihito,Kuwata, Shigeki,Ikariya, Takao,Watanabe, Masahito
-
p. 10962 - 10977
(2019/09/03)
-
- Oxygenation of styrenes catalyzed by N-doped carbon incarcerated cobalt nanoparticles
-
NCI-Co catalyzed olefin oxygenation reactions were investigated. Among the metals examined, including noble metals, the reaction proceeded specifically on Co catalysts, and nitrogen dopant was crucial for the catalytic activity. The presence of NaBH4 as a hydride source, the corresponding alcohols were obtained in high yields. The substrates bearing a reductant-sensitive functional group were made tolerant by changing the reductant and using an additive, and furthermore, the corresponding ketones were accessed by changing reaction conditions. A preliminary examination of other SOMOphiles suggested that the heterogeneous catalyst systems have the potential to be applied to more general hydrofunctionalization of olefins to form various kinds of bonds. Several mechanistic studies suggested that the reaction proceeded in a heterogeneous manner and formed a radical intermediate on cobalt nanoparticle species.
- Yasukawa, Tomohiro,Kobayashi, Shū
-
supporting information
p. 1980 - 1985
(2019/12/24)
-
- Silver-Catalyzed Hydrogenation of Ketones under Mild Conditions
-
The silver-catalyzed hydrogenation of ketones using H2 as hydrogen source is reported. Silver nanoparticles are generated from simple silver (I) salts and operate at 25 °C under 20 bar of hydrogen pressure. Various aliphatic and aromatic ketones, including natural products were reduced into the corresponding alcohols in high yields. This silver catalyst allows for the selective hydrogenation of ketones in the presence of other functional groups. (Figure presented.).
- Wang, Shengdong,Huang, Haiyun,Tsareva, Svetlana,Bruneau, Christian,Fischmeister, Cédric
-
supporting information
p. 786 - 790
(2019/01/04)
-
- A Practical and Stereoselective In Situ NHC-Cobalt Catalytic System for Hydrogenation of Ketones and Aldehydes
-
Homogeneous catalytic hydrogenation of carbonyl groups is a synthetically useful and widely applied organic transformation. Sustainable chemistry goals require replacing conventional noble transition metal catalysts for hydrogenation by earth-abundant base metals. Herein, we report how a practical in situ catalytic system generated by easily available pincer NHC precursors, CoCl2, and a base enabled efficient and high-yielding hydrogenation of a broad range of ketones and aldehydes (over 50 examples and a maximum turnover number [TON] of 2,610). This is the first example of NHC-Co-catalyzed hydrogenation of C=O bonds using flexible pincer NHC ligands consisting of a N-H substructure. Diastereodivergent hydrogenation of substituted cyclohexanone derivatives was also realized by fine-tuning of the steric bulk of pincer NHC ligands. Additionally, a bis(NHCs)-Co complex was successfully isolated and fully characterized, and it exhibits excellent catalytic activity that equals that of the in-situ-formed catalytic system. Catalytic hydrogenation is a powerful tool for the reduction of organic compounds in both fine and bulk chemical industries. To improve sustainability, more ecofriendly, inexpensive, and earth-abundant base metals should be employed to replace the precious metals that currently dominate the development of hydrogenation catalysts. However, the majority of the base-metal catalysts that have been reported involve expensive, complex, and often air- and moisture-sensitive phosphine ligands, impeding their widespread application. From a mixture of the stable CoCl2, imidazole salts, and a base, our newly developed catalytic system that formed easily in situ enables efficient and stereoselective hydrogenation of C=O bonds. We anticipate that this easily accessible catalytic system will create opportunities for the design of practical base-metal hydrogenation catalysts. A practical in situ catalytic system generated by a mixture of easily available pincer NHC precursors, CoCl2, and a base enabled highly efficient hydrogenation of a broad range of ketones and aldehydes (over 50 examples and up to a turnover number [TON] of 2,610). Diastereodivergent hydrogenation of substituted cyclohexanone derivatives was also realized in high selectivities. Moreover, the preparation of a well-defined bis(NHCs)-Co complex via this pincer NHC ligand consisting of a N-H substructure was successful, and it exhibits equally excellent catalytic activity for the hydrogenation of C=O bonds.
- Zhong, Rui,Wei, Zeyuan,Zhang, Wei,Liu, Shun,Liu, Qiang
-
supporting information
p. 1552 - 1566
(2019/06/14)
-
- Selective Room-Temperature Hydrogenation of Carbonyl Compounds under Atmospheric Pressure over Platinum Nanoparticles Supported on Ceria-Zirconia Mixed Oxide
-
A Pt/CeO2-ZrO2 catalytic system was able to initiate an extremely intense hydrogen spillover providing a huge amount of activated hydrogen (12 mol/mol Pt) at temperatures –50°C - +25°C, which was not observed before. The idea was to use this activated hydrogen for reduction of carbonyl compounds under ambient conditions. Thus, the efficient and selective heterogeneous hydrogenation of carbonyl compounds of different structure, including 5-hydroxymethylfurfural and cinnamaldehyde, to the corresponding alcohols with quantitative yields was successfully performed over the Pt/CeO2-ZrO2 catalysts at room-temperature and atmospheric pressure of H2. The proposed catalysts afforded hydrogenation under significantly milder conditions with a much higher activity and selectivity compared to the commercial catalysts and reported catalytic systems. Hydrogenation of the C=O bond in the presence of a C=C bond proceeded with a high regioselectivity.
- Redina, Elena A.,Vikanova, Kseniia V.,Kapustin, Gennady I.,Mishin, Igor V.,Tkachenko, Olga P.,Kustov, Leonid M.
-
supporting information
p. 4159 - 4170
(2019/07/12)
-
- Method for synthesizing secondary alcohol
-
The invention discloses a method for synthesizing secondary alcohol, which utilizes transition metal catalysis and uses isopropanol as a hydrogen source to synthesize the secondary alcohol. The reaction not only uses inexpensive and environmentally friendly isopropanol as the hydrogen source and a solvent, but also has the advantages of high yield, environmental protection, and the like, and therefore the reaction has broad development prospects.
- -
-
Paragraph 0104; 0105; 0106; 0107
(2019/03/15)
-
- Substitution of Secondary Benzylic Phosphates with Diarylmethyl Anions
-
Substitution of diethyl and diphenyl benzylic phosphates, Alk-CH(Ar1)OP(O)(OR)2 (R = Et, Ph; Alk = Me, Et, i-Pr; Ar1 = aryl), with the anions derived from Ar2CH2 (Ph2CH2,9H-xanthene and fluorene) and n-BuLi at –15 °C was studied. For phosphates with Me as an Alk, diethyl phosphates produced Me-CH(Ar1)CH(Ar2)2 (Ar1 = 4-halo-, 4-CN, 4-Me-, 2-Me, 2-Br-, 3-MeO-phenyl and 2-naphthyl). However, an unwanted substitution at the Et group competed with phosphates of Alk = Et- and i-Pr. Fortunately, the corresponding diphenyl phosphates cleanly underwent the desired substitution. Two enantioenriched phosphates, MeCH(Ph)OP(O)(OEt)2 and EtCH(Ph)OP(O)(OPh)2, proceeded with complete inversion of the stereochemistry.
- Shinohara, Riku,Kawashima, Hidehisa,Ogawa, Narihito,Kobayashi, Yuichi
-
p. 2717 - 2725
(2019/04/04)
-
- Heteroditopic Ru(II)-And Ir(III)-NHC Complexes with Pendant 1,2,3-Triazole/Triazolylidene Groups: Stereoelectronic Impact on Transfer Hydrogenation of Unsaturated Compounds
-
Imidazol-2-ylidene (ImNHC) and 1,2,3-Traizol-5-ylidene (tzNHC) have been established as important classes of carbene ligands in homogeneous catalysis. To develop Ru(II)/Ir(III) complexes based on these ligand systems considering their electronic as well as steric profiles for hydride transfer reactions, we employed chelating ligands featuring combinations of ImNHC and triazole-N or mesoionic tzNHC donors bridged by a CH2 spacer with possible modifications at triazole backbone. In general, synthesized Ru(II) complexes were found to perform significantly better than analogous Ir(III) complexes in ketone and aldimine reduction. Among the Ru(II) complexes, electron-rich complexes 8/9 of the general formula [(p-cymene)(ImNHC-CH2-TzNHC)RuII(Cl)]BF4 with two different carbene donors (ImNHC and tzNHC) were found to perform appreciably better in ketone reduction than analogous complexes with a combination of ImNHC and triazole-N-donor ([(p-cymene)(ImNHC-CH2-Tz-N)RuII(Cl)]BF4; 4) explaining the electronic fine-Tuning of the catalytic systems. No appreciable variation in activity was observed between complexes 8 and 9 having almost similar electronic profiles. However, less bulky Ru(II) complex 9 with a triazole N-phenyl substituent is more suitable for aldimine reduction than is complex 8, having a triazole N-3,5-dimethylphenyl substituent that explains the steric influence in addition to electronic effect on the reduction process.
- Illam, Praseetha Mathoor,Donthireddy,Chakrabartty, Sayantan,Rit, Arnab
-
supporting information
p. 2610 - 2623
(2019/07/31)
-
- Transfer hydrogenation of ketones catalyzed by 2,6‐bis(triazinyl)pyridine ruthenium complexes: The influence of alkyl arms
-
The transfer hydrogenation of ketones catalyzed by transition metal complexes has attracted much attention. A series of ruthenium(II) complexes bearing 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridine ligands (R-BTPs) were synthesized and characterized by NMR analysis and X-ray diffraction. These ruthenium(II) complexes were applied in the transfer hydrogenation of ketones. Their different catalytic activity were attributed to the alkyl arms on the 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridine. As the length of the alkyl arms rising, the catalytic activities of the complex catalysts decreased. By means of 0.4 mol % catalyst RuCl2(PPh3)(3-methylbutyl-BTP) in refluxing 2-propanol, a variety of ketones were reduced to their corresponding alcohols with >95% conversion over a period of 3 h.
- Wang, Liandi,Liu, Tingting
-
supporting information
(2019/08/12)
-