Community Right-To-Know List. Reported in EPA TSCA Inventory. IARC Cancer Review: Group 3 IMEMDT    IARC Monographs on the Evaluation of Carcinogenic Risk of Chemicals to Man . 48 (1990),p. 149.(World Health Organization, Internation Agency for Research on Cancer,Lyon, France.: ) (Single copies can be ordered from WHO Publications Centre U.S.A., 49 Sheridan Avenue, Albany, NY 12210) ; Animal Inadequate Evidence IMEMDT    IARC Monographs on the Evaluation of Carcinogenic Risk of Chemicals to Man . 8 (1975),p. 97.(World Health Organization, Internation Agency for Research on Cancer,Lyon, France.: ) (Single copies can be ordered from WHO Publications Centre U.S.A., 49 Sheridan Avenue, Albany, NY 12210) ; NTP Carcinogenesis Bioassay (feed); Clear Evidence: mouse, rat NTPTR*    National Toxicology Program Technical Report Series. (Research Triangle Park, NC 27709) NTP-TR-222 ,1982. .

The Disperse Yellow 3 with the cas number 2832-40-8. It is also called N-[4-[(2E)-2-(3-methyl-6-oxocyclohexa-2,4-dien-1-ylidene)hydrazinyl]phenyl]acetamide, which is also it's IUPAC name, and it's system Name are (1)Acetamide, N-(4-((2-hydroxy-5-methylphenyl)azo)phenyl)- ; (2)Acetamide, N-(4-(2-(2-hydroxy-5-methylphenyl)diazenyl)phenyl)-; (3)N-(4-((2-Hydroxy-5-methylphenyl)azo)phenyl)acetamide. And it belongs to the following product categories: (1)Dyes and Pigments; (2)Organics; (3)Solvent Dyestuff. It is insoluble in water and can be explosive when suspended in air at certain concentrations. It can be used for dyeing of polyester and blended fabrics. It is an azo compound. It is incompatible with strong oxidizing agents and strong acids . In addition, explosive combination can occur with strong oxidizing agents, metal salts, peroxides, and sulfides.

Physical properties about Disperse Yellow 3 are: (1)ACD/LogP: 2.92 ; (2)# of Rule of 5 Violations: 0 ; (3)ACD/LogD (pH 5.5): 2.92 ; (4)ACD/LogD (pH 7.4): 2.9 ; (5)#H bond acceptors: 5 ; (6)#H bond donors: 2 ; (7)#Freely Rotating Bonds: 4 ; (8)Polar Surface Area: 74.05 Å² ; (9)Index of Refraction: 1.604 ; (10)Molar Refractivity: 77.07 cm³ ; (11)Molar Volume: 224 cm³ ; (12)Polarizability: 30.55 ×10^-24cm³ ; (13)Surface Tension: 44.7 dyne/cm ; (14)Density: 1.2 g/cm³ ; (15)Flash Point: 276.7 °C ; (16)Enthalpy of Vaporization: 84.04 kJ/mol ; (17)Boiling Point: 533.9 °C at 760 mmHg ; (18)Vapour Pressure: 5.15E-12 mmHg at 25°C

When you are using Disperse Yellow 3, please be cautious about it as the following: 1-Methylamino-4-ethanolamino-anthraquinone may cause eye and skin irritation. In case of contact with eyes or skin, flush eyes or skin with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Besides, it may cause respiratory tract irritation and may be harmful if inhaled. If inhalation, remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Store in a cool, dry place. Store in a tightly closed container. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. And Use water spray, dry chemical, carbon dioxide, or chemical foam to put out fire.

You can still convert the following datas into molecular structure :
(1).Smiles: c1(\N=N\c2ccc(NC(C)=O)cc2)c(ccc(c1)C)O
(2).InChI=1/C15H15N3O2/c1-10-3-8-15(20)14(9-10)18-17-13-6-4-12(5-7-13)16-11(2)19/h3-9,20H,1-2H3,(H,16,19)/b18-17+

Toxic information of Disperse Yellow 3 can be showed as follows: