Silver and its compounds are on the Community Right-To-Know List.

OSHA PEL: TWA 0.01 mg(Ag)/m³; 2.5 mg(F)/m³
ACGIH TLV: TWA 0.01 mg(Ag)/m³; TWA 2.5 mg(F)/m³; BEI: 3 mg/g creatinine of fluorides in urine prior to shift; 10 mg/g creatinine of fluorides in urine at end of shift.
NIOSH REL: (Inorganic Fluorides) TWA 2.5 mg(F)/m³

The CAS registry number of Silver(i) fluoride is 7775-41-9. The IUPAC name is fluorosilver. Its EINECS registry number is 231-895-8. In addition, the molecular formula is AgF and the molecular weight is 126.87. It is a kind of orange to brown solid and belongs to the classes of Metal and Ceramic Science; Salts; Silver Salts; Q-S, Puriss p.a.; Analytical Reagents for General Use; Puriss p.a.; Crystal Grade Inorganics; SilverMetal and Ceramic Science. And it is soluble in water and it even has some solubility in acetonitrile. What's more, it is incompatible with strong oxidizing agents and strong acids and reducing agents.

Physical properties about this chemical are: (1)Enthalpy of Vaporization: 25.54 kJ/mol; (2)Boiling Point: 19.5 °C at 760 mmHg; (3)Vapour Pressure: 922 mmHg at 25°C; (4)H-Bond Acceptor: 1; (5)Exact Mass: 125.903496; (6)MonoIsotopic Mass: 125.903496; (7)Heavy Atom Count: 2; (8)Formal Charge: 0; (9)Complexity: 2; (10)Covalently-Bonded Unit Count: 1.

Preparation of Silver(i) fluoride: it can be prepared by silver carbonate and hydrofluorineic acid. Firstly, add silver carbonate into platinum dish, then add hydrofluorineic acid to completely dissolve. The whole synthesis process should be kept in dark place.

Uses of Silver(i) fluoride: it can be used as fluorinating agent. And it can be used in organofluorine chemistry for addition of fluoride across multiple bonds. For example, it adds to perfluoroalkenes in acetonitrile to give perfluoroalkylsilver(I) derivatives.

When you are using this chemical, please be cautious about it as the following:
This chemical can cause burns. And it is toxic by inhalation, in contact with skin and if swallowed. When you are using it, wear suitable protective clothing, gloves and eye/face protection and avoid contact with eyes. In case of contact with eyes, rinse immediately with plenty of water or soap-suds and seek medical advice. And in case of accident or if you feel unwell, seek medical advice immediately (show label where possible). Although it is slightly harmful to the water, if without government permission, do not put this material into surroundings.

You can still convert the following datas into molecular structure:
(1)SMILES: [Ag]F
(2)InChI: InChI=1/Ag.FH/h;1H/q+1;/p-1
(3)InChIKey: REYHXKZHIMGNSE-REWHXWOFAR