Products Categories
CAS No.: | 107-37-9 |
---|---|
Name: | ALLYLTRICHLOROSILANE |
Article Data: | 48 |
Molecular Structure: | |
Formula: | C3H5 Cl3 Si |
Molecular Weight: | 175.517 |
Synonyms: | Silane,allyltrichloro- (6CI,7CI,8CI); Silane, trichloro-2-propenyl- (9CI);Allyltrichlorosilane; NSC 20940; Propen-3-yltrichlorosilane;Trichloro(2-propenyl)silane |
Density: | 1.625g/cm3 |
Melting Point: | 35℃ |
Boiling Point: | °Cat760mmHg |
Flash Point: | °C |
Solubility: | Soluble in THF, toluene, benzene. Reacts with water. |
Appearance: | Clear colorless to slightly yellow liquid |
Hazard Symbols: | |
Risk Codes: | 11-34 |
Safety: | Poison by intravenous route. Corrosive. See ALLYL COMPOUNDS. When heated to decomposition it emits toxic Cl−. A dangerous fire hazard. To fight fire, use foam, mist, spray, dry chemical. |
PSA: | 0.00000 |
LogP: | 2.82770 |
Molecular Structure of Allyl trichlorosilane (CAS NO.107-37-9):
IUPAC Name: trichloro(prop-2-enyl)silane
Empirical Formula: C3H5Cl3Si
Molecular Weight: 175.5163
Index of Refraction: 1.456
Surface Tension: 23.5 dyne/cm
Density: 1.227 g/cm3
Flash Point: 31.1 °C
Enthalpy of Vaporization: 33.9 kJ/mol
Boiling Point: 115.2 °C at 760 mmHg
Vapour Pressure: 22.8 mmHg at 25°C
Storage temp: flammables area
Sensitive: moisture Sensitive
Synonyms of Allyl trichlorosilane (CAS NO.107-37-9): 3-Trichlorosilylpropene ; Allyltrichlorosilane ; Trichloroallylsilane
; Allyl trichlorosilane ,stabilized ; Allylsilicone ; Allylsiliconetrichloride ; Allyltrichloro-silan ; Allyltrichlorosilane,stabilized.
Allyl trichlorosilane (CAS NO.107-37-9) is used to compose organic silicone intermediates and polymers.
1. | ivn-mus LD50:56 mg/kg | CSLNX* U.S. Army Armament Research & Development Command, Chemical Systems Laboratory, NIOSH Exchange Chemicals. (Aberdeen Proving Ground, MD 21010) NX#04219 . |
Reported in EPA TSCA Inventory.
Poison by intravenous route. Corrosive. See ALLYL COMPOUNDS. When heated to decomposition it emits toxic Cl−. A dangerous fire hazard. To fight fire, use foam, mist, spray, dry chemical.
Hazard Codes:F,C
Risk Statements:11-34
R11:Highly flammable.
R34:Causes burns.
Safety Statements 16-26-33-36/37/39-43-45
S16:Keep away from sources of ignition.
S26: In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S33:Take precautionary measures against static discharges.
S36/37/39:Wear suitable protective clothing, gloves and eye/face protection.
S43:In case of fire use ... (there follows the type of fire-fighting equipment to be used.)
S45:In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
DOT Classification: 8; Label: Corrosive, Flammable Liquid
Chemical Properties of Allyl trichlorosilane (CAS NO.107-37-9) is a kind of pale yellow liquid with colorless and irritant smell . Flash point is 95°F, it is corrosive to metals and tissue.
Reactivity Profile Chlorosilanes, such as Allyl trichlorosilane (CAS NO.107-37-9) , are compounds in which silicon is bonded to from one to four chlorine atoms with other bonds to hydrogen and/or alkyl groups. Chlorosilanes react with water, moist air, or steam to produce heat and toxic, corrosive fumes of hydrogen chloride. They may also produce flammable gaseous H2. They can serve as chlorination agents. Chlorosilanes react vigorously with both organic and inorganic acids and with bases to generate toxic or flammable gases.
Health Hazard: inhalation of vapor irritates mucous membranes , liquid causes severe burns of eyes and skin, severe internal burns if ingested.
Allyl trichlorosilane (CAS NO.107-37-9) should avoid to contact with the following materials: incompatible materials: water and strong oxidizin.