Detail of "1299-86-1"

Reference

Kinetics of the contact interaction of carbon fibers with aluminum

Kinetics of the contact interaction of carbon fibers with aluminum. Moskalenko, A. G.; Sulaeva, L. Ya.; Dergunova, V. S.; Kulin, V. S.; Davydov, Yu. A. (Voronezh. Politekh. Inst., Voronezh, USSR). Mekh. Polim., (4), 720-2 (Russian) 1977. CODEN: MKPLA6. DOCUMENT TYPE: Journal CA Section: 56 (Nonferrous Metals and Alloys) The contact reaction of C fiber with Al and of C fibers coated with TiC, SiC, or ZrC with Al was studied by low-frequency internal friction at 20-1000.degree. and .apprx.5 .times. 10-5 torr. The Al film of .apprx.0.3 .mu. thickness was deposited on C fibers at 660.degree.. On the curve of internal friction and of shear modulus relation to temp. 2 maxs. at 100-500.degree. and 600-750.degree. were obsd. for Al-coated C fibers. The deposition of TiC on C fiber resulted in a significant suppression of the 2 maxs. At 100-500.degree. the conglomeration of the Al film and at 550-800 the formation of the Al4C3 [1299-86-1] phase occurred. The carbide barrier sublayer suppressed the conglomeration of the Al film and impeded formation of Al carbide.

Some properties of sintered aluminum carbide

Some properties of sintered aluminum carbide. Iseki, T.; Kameda, T.; Maruyama, T. (Res. Lab. Nucl. React., Tokyo Inst. Technol., Tokyo 152, Japan). J.Several reagents with their cas registry numbers 1299-86-1 and 409-21-2 are used here. Mater. Sci. Lett., 2(11), 675-6 (English) 1983. CODEN: JMSLD5. ISSN: 0261-8028. DOCUMENT TYPE: Journal CA Section: 57 (Ceramics) Section cross-reference(s): 56 The 4-point bending strength, Vickers microhardness, linear thermal expansion, and resistance to corrosion by water of hot-pressed Al4C3 samples were studied in relation to Al4C3 formation when joining SiC and Al for composites. The av. 4-point bending strength was 152 and 165 MN/m2 at room temp. and 1273 K, resp., Vickers hardness was 12,000 MN/m2, and the corrosion resistance of samples immersed in water was no wt. change at ￡30 h, 2.8 wt.% loss after 50 h, and the sample was completely broken after 100 h. .