57117-41-6Relevant articles and documents
Emission factors and importance of PCDD/Fs, PCBs, PCNs, PAHs and PM 10 from the domestic burning of coal and wood in the U.K.
Lee, Robert G. M.,Coleman, Peter,Jones, Joanne L.,Jones, Kevin C.,Lohmann, Rainer
, p. 1436 - 1447 (2007/10/03)
This paper presents emission factors (EFs) derived for a range of persistent organic pollutants (POPs) when coal and wood were subject to controlled burning experiments, designed to simulate domestic burning for space heating. A wide range of POPs were emitted, with emissions from coal being higher than those from wood. Highest EFs were obtained for particulate matter, PM10, (～ 10 g/kg fuel) and polycyclic aromatic hydrocarbons (～ 100 mg/ kg fuel for ΣPAHs). For chlorinated compounds, EFs were highest for polychlorinated biphenyls (PCBs), with polychlorinated naphthalenes (PCNs), dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) being less abundant. EFs were on the order of 1000 ng/kg fuel for ΣPCBs, 100s ng/ kg fuel for ΣPCNs and 100 ng/kg fuel for ΣPCDD/Fs. The study confirmed that mono- to trichlorinated dibenzofurans, Cl1,2,3DFs, were strong indicators of low temperature combustion processes, such as the domestic burning of coal and wood. It is concluded that numerous PCB and PCN congeners are routinely formed during the combustion of solid fuels. However, their combined emissions from the domestic burning of coal and wood would contribute only a few percent to annual U.K. emission estimates. Emissions of PAHs and PM 10 were major contributors to U.K. national emission inventories. Major emissions were found from the domestic burning for Cl1,2,3DFs, while the contribution of PCDD/F-ΣTEQ to total U.K. emissions was minor.
Characteristics of dioxins and metals emission from radwaste plasma arc melter system
Yang, Hee-Chul,Kim, Joon-Hyung
, p. 421 - 428 (2007/10/03)
This study investigated the emission characteristics of PCDD/Fs and the partitioning of three heavy metals (Cd, Hg and Pb) and two radioactive metal surrogates (Co and Cs) in a radwaste plasma arc melter system. Typical mixtures of low-level radioactive wastes were simulated as the trial burn surrogate wastes. The emission of PCDD/Fs and the partitioning of the metals were strongly influenced by the feed waste stream and melter operating temperature, respectively. The emissions of PCDD/Fs, cadmium and lead were greatly enhanced when the polyvinyl chloride was included in the feed waste stream. Most of the nonvolatile cobalt partitioned into the glass. A significant quantity of cesium, cadmium and lead was vaporized during the highest melter temperature test. A lower melter temperature resulted in more cesium, cadmium and lead species remaining in the glass. The results of this study suggest that wet scrubbing as well as a low-temperature two-step fine filtration, or both of them together could not effectively capture the gas-phase or fine particle phase PCDD/Fs and mercury species. In order to effectively treat low-level radioactive waste streams, the tested high-temperature melter should include an adsorption system, which could collect the gas-phase PCDD/Fs and mercury species.
Catalytic NOx reduction with simultaneous dioxin and furan oxidation.
Goemans, Marcel,Clarysse, Patrick,Joannes, Joseph,De Clercq, Petra,Lenaerts, Silvia,Matthys, Karel,Boels, Kris
, p. 1357 - 1365 (2007/10/03)
The engineering, construction, performance and running costs of a catalytic flue gas cleaning component in the low dust area of a municipal waste incinerator is discussed. For this purpose, the case study of a Flemish incineration plant is presented, covering the history, the design procedure of the catalyst, relevant process data and the financial aspects. A reliable PCDD/F-destruction by means of oxidation by the catalyst to typical values of 0.001 ng TEQ/Nm3 has been demonstrated. At the same time, NOx- and CO-emissions are reduced by 90% and 20% to about 50 mg/Nm3 and below 10 mg/Nm3, respectively.
