10024-47-2

Basic information

• Product Name: isobutyl oleate
• Synonyms: 9-Octadecenoic acid (9Z)-, 2-methylpropyl ester;Fettsuren (C16-C18) und C18 ungesttigt, Isobutylester;9-Octadecenoic acid (Z)-, 2-methylpropyl ester;9-Octadecenoic acid(Z)-,2-methylpropyl ester;(Z)-9-Octadecenoic acid 2-methylpropyl ester;(Z)-9-Octadecenoic acid isobutyl ester;Oleic acid isobutyl ester;Einecs 233-022-6
• CAS NO: 10024-47-2
• Molecular Formula: C₂₂H₄₂O₂
• Molecular Weight: 338.57
• EINECS: 233-022-6
• Mol File: 10024-47-2.mol

Chemical Properties

• Boiling Point: 411.2°C at 760 mmHg
• Flash Point: 87.4°C
• Appearance: /
• Density: 0.87g/cm³
• Vapor Pressure: 5.69E-07mmHg at 25°C
• Refractive Index: 1.455
• CAS DataBase Reference: isobutyl oleate(CAS DataBase Reference)
• NIST Chemistry Reference: isobutyl oleate(10024-47-2)
• EPA Substance Registry System: isobutyl oleate(10024-47-2)

Safety Data

• Hazardous Substances Data: 10024-47-2(Hazardous Substances Data)

Usage

Uses

Used in Cosmetic and Personal Care Products:
Isobutyl oleate is used as a solvent, emollient, and dispersing agent for its ability to enhance the spreadability and texture of formulas, as well as to provide a smooth, non-greasy feel on the skin.
Used in Industrial Products:
Isobutyl oleate is used as a component in lubricants, coatings, and adhesives due to its properties that make it suitable for these applications.
Used in Pharmaceutical Industry:
Although not explicitly mentioned in the provided materials, isobutyl oleate can also be used in the pharmaceutical industry as a solvent or carrier for various drug formulations, taking advantage of its solubility properties and ability to improve the texture of formulations.

InChI:InChI=1/C22H42O2/c1-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-19-22(23)24-20-21(2)3/h11-12,21H,4-10,13-20H2,1-3H3/b12-11-

Upstream product

• 111-62-6 oleic acid ethyl ester 
• 112-62-9 Methyl oleate 
• 78-83-1 2-methyl-propan-1-ol 
• 122-32-7 trioleoylglycerol 
• 112-80-1 cis-Octadecenoic acid 
• 7664-93-9 sulfuric acid 

Downstream Products

• 646-13-9 octadecanoic acid, 2-methylpropyl ester 

Relevant articles and documents

The 3D model of the lipase/acyltransferase from Candida parapsilosis, a tool for the elucidation of structural determinants in CAL-A lipase superfamily

Abstract Because lipids are hydrophobic, the development of efficient bioconversions in aqueous media free of organic solvents is particularly challenging for green oleochemistry. Within this aim, enzymes exhibiting various abilities to catalyze acyltransfer reaction in water/lipid systems have been identified. Among these, CpLIP2 from Candida parapsilosis has been characterized as a lipase/acyltransferase, able to catalyze acyltransfer reactions preferentially to hydrolysis in the presence of particularly low acyl acceptor concentration and high thermodynamic activity of water (aw > 0.9). Lipase/acyltransferases are thus of great interest, being able to produce new esters at concentrations above the thermodynamic equilibrium of hydrolysis/esterification with limited to no release of free fatty acids. Here, we present a 3D model of CpLIP2 based on homologies with crystallographic structures of Pseudozyma antarctica lipase A. Indeed, the two enzymes have 31% of identity in their primary sequence, yielding a same general structure, but different catalytic properties. The quality of the calculated CpLIP2 model was confirmed by several methods. Limited proteolysis confirmed the location of some loops at the surface of the protein 3D model. Directed mutagenesis also supported the structural model constructed on CAL-A template: the functional properties of various mutants were consistent with their structure-based putative involvement in the oxyanion hole, substrate specificity, acyltransfer or hydrolysis catalysis and structural stability. The CpLIP2 3D model, in comparison with CAL-A 3D structure, brings insights for the elucidation and improvement of the structural determinants involved in the exceptional acyltransferase properties of this promising biocatalyst and of homologous enzymes of the same family.

Improvement in the gas chromatographic resolution of petroselinate from oleate

In the extraction of oils from seeds of the genus Coriandrum, GC separations of petroselinate from oleate often gave poor resolution of these two isomers. Oleic and petroselinic acids were esterified with a series of alcohols (methanol, ethanol, 1 propanol, 2-propanol, 2-methyl-1 -propanol, 1 -butanol, 3-methyl1-butanol, and 2-ethyl-1-hexanol). GC resolution of the A6 from the Δ9 and Δ11 octadecenoates was examined for all ester derivatives on a polar phase column. The Δ6 and Δ9 isomers were unresolved as methyl esters; however, the 2-ethyl-1-hexyl esters gave baseline separation of all three isomers under temperature programming conditions. When isothermal conditions were optimized for each ester, separation of these isomers was possible with good resolution values (>89%) for all the alcohols except methanol, which had a partial resolution of 51%. The rates of esterification of all the alcohols were determined for reactions with both oleic acid and triolein using potassium hydroxide as the esterification catalyst. Methanol gave the largest rate constant in both acid and oil esterification reactions with a rate constant 10-fold better than all of the other alcohols. Based on rates of reaction, resolution of petroselinate from oleate, and removal of residual alcohol, the ethyl ester derivative appears to be the best choice for seed oils containing petroselinic acid. Copyright

Studies on the lipase-catalyzed esterification of alkyl oleates in solvent-free systems

The alkyl oleates were prepared by esterification of oleic acid with alkyl alcohols catalyzed by the lipase from Candida sp. 99-125 in solvent-free system. The influence of several factors, including enzyme concentration, temperature, molar ratio between oleic acid and alkyl alcohols, the structure of alcohols and water content, was also investigated. The results indicated that the reactions catalyzed by Candida sp. lipase at 20 °C, in the presence of 5% (w/w) lipase, on the molar ratio of 1:1 between oleic acid and alcohols, afforded products in high yield and showed high selectivity to primary alcohols. The enzymatic synthesis gave purer products, compared with the conventional chemical synthesis. The lipase from Candida sp. 99-125 was identified to be an effective catalyst in the esterification of alcohol and oleic acid at low temperature.

Revealing the Roles of Subdomains in the Catalytic Behavior of Lipases/Acyltransferases Homologous to CpLIP2 through Rational Design of Chimeric Enzymes

The lipases/acyltransferases homologous to CpLIP2 of Candida parapsilosis efficiently catalyze acyltransfer reactions in lipid/water media with high water activity (aW>0.9). Two new enzymes of this family, CduLAc from Candida dubliniensis and CalLAc8 from Candida albicans, were characterized. Despite 82 % sequence identity, the two enzymes have significant differences in their catalytic behaviors. In order to understand the roles played by the different subdomains of these proteins (main core, cap and C-terminal flap), chimeric enzymes were designed by rational exchange of cap and C-terminal flap, between CduLAc and CalLAc8. The results show that the cap region plays a significant role in substrate specificity; the main core was found to be the most important part of the protein for acyltransfer ability. Similar exchanges were made with CAL-A from Candida antarctica, but only the C-terminal exchange was successful. Yet, the role of this domain was not clearly elucidated, other than that it is essential for activity.

Epoxidized fatty acid ester plasticizer epoxidized fatty acid ester plasticizer and manufacturing method

Epoxidized fatty acid alkyl ester and methods for making epoxidized fatty acid alkyl ester. The epoxidized fatty acid alkyl ester is prepared from a fatty acid alkyl ester starting material comprising at least one of mono-unsaturated and di-unsaturated fatty acid alkyl ester molecules in a combined amount of at least 85 weight percent. Such epoxidized fatty acid alkyl esters can be employed in plasticizer compositions, either alone or in combination with other plasticizers, such as epoxidized natural oils. Such plasticizers in turn may be used in the formation of polymeric compositions.