13002-11-4 Usage
Uses
Used in Paint and Coating Industry:
1,1-Di-isobutoxypropane is used as a solvent in paint and coating formulations for its high solvency power and low volatility, which helps in achieving a smooth and even finish.
Used in Adhesive Industry:
1,1-Di-isobutoxypropane is used as a solvent in adhesive formulations for its ability to dissolve a wide range of materials and improve the adhesive's performance.
Used in Printing Ink Industry:
1,1-Di-isobutoxypropane is used as a solvent in printing ink formulations for its ability to dissolve various components and provide a consistent ink flow.
Used in Rare Earth Metal Extraction:
1,1-Di-isobutoxypropane is used as a solvent in the extraction of rare earth metals due to its ability to dissolve these metals and facilitate their separation from other materials.
Used as a Chemical Intermediate:
1,1-Di-isobutoxypropane is used as a chemical intermediate in the synthesis of pharmaceuticals and other organic compounds, contributing to the production of various end products.
Safety Precautions:
While 1,1-Di-isobutoxypropane is considered to have low acute toxicity, it can be harmful if inhaled, ingested, or comes into contact with the skin. Therefore, proper safety precautions should be taken when handling this chemical, including the use of personal protective equipment and ensuring proper ventilation.
Check Digit Verification of cas no
The CAS Registry Mumber 13002-11-4 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 1,3,0,0 and 2 respectively; the second part has 2 digits, 1 and 1 respectively.
Calculate Digit Verification of CAS Registry Number 13002-11:
(7*1)+(6*3)+(5*0)+(4*0)+(3*2)+(2*1)+(1*1)=34
34 % 10 = 4
So 13002-11-4 is a valid CAS Registry Number.
13002-11-4Relevant articles and documents
PRODUCTS FORMED IN REACTIONS OF ALIPHATIC ALCOHOLS WITH CO AND H2 IN PRESENCE OF COBALT CARBONYLS.
Del'nik,Kagna,Katsnel'son,Rabinovich,Skop,Churakov
, p. 2183 - 2188 (2007/10/02)
The purpose of this work was to identify the products of conversion of aliphatic alcohols (specifically, butyl alcohols) in the course of production of cobalt carbonyls in suspensions of cobalt carbonate, and also to study the dependence of the yield of these products on the conditions of the carbonylation reactions. It was found that variation of the CO//2:H//2 ratio (from 3:1 to 1:2. 3) has no significant influence on the yield of by-products of carbonyl formation, which was 0. 7-1. 2 mass % in all experiments. Increase of temperature (to 180 degree ) and of the reaction time (to 4-6 h) leads to some increase of the by-products yield (1. 2-1. 7 mass %), mainly owing to increase of the amount of water formed, and to some extent of the amount of isobutyraldehyde. However, it must be pointed out that the by-products obtained during carbonyl formation can subsequently be converted into the required compounds during use of alcoholic solutions of cobalt carbonyls in the course of hydroformylation of olefins. These products are undoubtedly aldehydes, formates, and acetals.
