60851-34-5

Basic information

• Product Name: 2,3,4,6,7,8-Hexachlorodibenzofuran
• Synonyms: 2,3,4,6,7,8-Hexachlorodibenzo[b,d]furan; dibenzofuran, 2,3,4,6,7,8-hexachloro-
• CAS NO: 60851-34-5
• Molecular Formula: C₁₂H₂Cl₆O
• Molecular Weight: 374.84
• Mol File: 60851-34-5.mol

Chemical Properties

• Boiling Point: 478.7°C at 760 mmHg
• Flash Point: 243.3°C
• Appearance: /
• Density: 1.766g/cm³
• Vapor Pressure: 7.26E-09mmHg at 25°C
• Refractive Index: 1.717
• CAS DataBase Reference: 2,3,4,6,7,8-Hexachlorodibenzofuran(CAS DataBase Reference)
• NIST Chemistry Reference: 2,3,4,6,7,8-Hexachlorodibenzofuran(60851-34-5)
• EPA Substance Registry System: 2,3,4,6,7,8-Hexachlorodibenzofuran(60851-34-5)

Safety Data

• Hazardous Substances Data: 60851-34-5(Hazardous Substances Data)

Usage

Uses

Given the highly toxic nature and environmental persistence of 2,3,4,6,7,8-Hexachlorodibenzofuran, its intentional use is limited and generally prohibited due to its detrimental effects on health and the environment. However, it may be encountered in the following contexts:
Used in Environmental Monitoring and Research:
2,3,4,6,7,8-Hexachlorodibenzofuran is used as a target analyte in environmental monitoring and research for understanding the extent of pollution, tracking the sources of contamination, and developing methods for its detection and remediation.
Used in Toxicological Studies:
In the field of toxicology, 2,3,4,6,7,8-Hexachlorodibenzofuran may be utilized as a model compound to study the mechanisms of toxicity, carcinogenicity, and endocrine disruption, which can contribute to the development of strategies for risk assessment and mitigation.
Used in Regulatory Compliance and Policy Development:
2,3,4,6,7,8-Hexachlorodibenzofuran serves as a critical reference substance in the enforcement of regulations and policies aimed at controlling the release of persistent organic pollutants, ensuring compliance with international agreements such as the Stockholm Convention.

InChI:InChI=1/C12H2Cl6O/c13-5-1-3-4-2-6(14)8(16)10(18)12(4)19-11(3)9(17)7(5)15/h1-2H

Upstream product

• 50563-36-5 2-chloro-N-(2,6-dimethylphenyl)-N-(2-methoxyethyl)-acetamide 
• 108-90-7 chlorobenzene 
• 88-06-2 2,4,6-Trichlorophenol 
• 95-95-4 2,4,5-trichlorophenol 

Relevant articles and documents

PCDD/DF formations by the heterogeneous thermal reactions of phenols and their TiO2 photocatalytic degradation by batch-recycle system

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/DFs) formation by the thermal reactions of phenols with CuCl2 under oxygen flux were carried out in relation to their formation mechanisms: To evaluate the effect of photocatalytic degra

Effects of oxygen on formation of PCB and PCDD/F on extracted fly ash in the presence of carbon and cupric salt

The effect of oxygen-nitrogen atmosphere (N2 + 10%O2, N2 + 1%O2 and 99.999% N2) on the formation of PCB, PCDD and PCDF by the de novo synthetic reactions in the system consisting of extracted fly ash

Formation and emission status of PCDDS/PCDFS in municipal solid waste incinerators in korea

This study was carried out to examine the formation and the emission status of polychlorinated dibenzo-p-dioxins/ polychlorinated dibenzofurans (PCDDs/PCDFs) in the flue gases of commercial-scale municipal solid waste (MSW) incinerators, and thus to provi

Dioxins from thermal and metallurgical processes: Recent studies for the iron and steel industry

In thermal metallurgical processes such as iron ore sintering and metal smelting operations, large flows of off-gases are generated. Mainly due to residue recycling in such processes, chlorine and volatile organics are always present in the feed. As a consequence of de novo formation, the off-gases from such processes typically contain dioxins in the range 0.3-30 ng I-TEQ/Nm3. So far there are only very few studies about the mechanisms of dioxin formation and destruction in these metallurgical processes. In an European Union (EU) research project Minimization of dioxins in thermal industrial processes: mechanisms, monitoring and abatement (MINIDIP) , integrated iron and steel plant has been selected as one of the industrial sectors for further investigation. A large number of particulate samples (feed, belt siftings, electrofilter) were collected from the iron ore sintering installations from various steel plants and analyzed for their organochlorocompound contents. Measurable amounts of PCDD/F, PCBz, PCB were found for all samples. The various parameters influencing their de novo synthesis activity were also evaluated in laboratory experiments, and such activity was found to be moderate for samples from the ore sinter belt, but extremely high for some ESP dusts. Fine dust is active in a wide range of temperatures starting at 200°C and declining above 450°C; the optimal temperature for de novo synthesis was found to be around 350°C; some inhibitors, such as triethanolamine, may reduce de novo activity by 50%, and lowering the O2 concentration in the gas stream leads to a much lower amount of PCDD/F formation. On the basis of their relative mass, typical operating conditions and specific activity of the different samples, the regions in the sintering plant where de novo synthesis may take place were tentatively established.

The effect of oils on PAH, PCDD, PCDF, and PCB emissions from a spark engine fueled with leaded gasoline

The effect of synthetic and mineral oils on the formation of polyaromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) in emissions from a spark ignition engine was studied on a Skoda Favorit engine fueled with leaded gasoline. The test cycle simulated urban traffic conditions on a chassis dynamometer, in accordance with the ECC 83.00 test. The data for selected PAHs as well as PCDDs, PCDFs, and PCBs congener profiles are presented. PCDD/Fs emissions for an unused oil and the oil after 10 000-km operation varied from 300 to 2000 fmol/m3, PCBs emissions from 75 to 178 pmol/m3, and PAHs emissions from 150 to 420 μg/m3. The content of PCBs in oils varied from 2 to 920 mg/kg.

Study of evolution of PCDD/F in sewage sludge-amended soils for land restoration purposes

The evolution of polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) in sewage sludge-amended soils used in the restoration of degraded lands, like quarries, has been studied. Two experiments were performed: one in the lab, under controlled conditions, and another in a quarry. Two different doses of sewage sludge were applied in both experiments (with two types of application in the quarry experiment) and the evolution of the amended soils were compared with that of the respective control soils (without addition of sewage sludge). The samples were analyzed with a previously validated method by HRGC-HRMS after the extraction and the necessary clean-up steps. The results reveal that polluted sewage sludge increases PCDD/F concentration in soils and that these compounds are persistent in the matrix after long periods of time. (C) 2000 Elsevier Science Ltd. The evolution of polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) in sewage sludge-amended soils used in the restoration of degraded lands, like quarries, has been studied. Two experiments were performed: one in the lab, under controlled conditions, and another in a quarry. Two different doses of sewage sludge were applied in both experiments (with two types of application in the quarry experiment) and the evolution of the amended soils were compared with that of the respective control soils (without addition of sewage sludge). The samples were analyzed with a previously validated method by HRGC-HRMS after the extraction and the necessary clean-up steps. The results reveal that polluted sewage sludge increases PCDD/F concentration in soils and that these compounds are persistent in the matrix after long periods of time. Laboratory and field experiments were conducted in Spain to examine the evolution of PCDDs and PCDFs in sewage-sludge-amended soils. The PCDD/F concentrations were measured in the original sewage sludge and in soil samples over time. Results from the laboratory showed that the PCDD/F concentration in amended soils was related directly to the sewage-sludge dose applied. After 1 yr, however, no evolution of PCDD/Fs was observed in any sample. In the field, high dispersion was observed, which did not allow establishment of a concentration trend over time. (from Eighteenth Symp on Halogenated Environ Organic Pollutants-Dioxin '98, Stockholm, Sweden (Aug 17-21, 98)).

Emissions of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans from the open burning of household waste in barrels

Backyard burning of household waste in barrels is a common waste disposal practice for which pollutant emissions have not been well characterized. This study measured the emissions of several pollutants, including polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/PCDFs), from burning mixtures designed to simulate waste generated by a 'recycling' and a 'nonrecycling' family in a 208-L (55-gal) burn barrel at the EPA's Open Burning Test Facility. This paper focuses on the PCDD/PCDF emissions and discusses the factors influencing PCDD/PCDF formation for different test burns. Four test burns were made in which the amount of waste placed in the barrel varied from 6.4 to 13.6 kg and the amount actually burned varied from 46.6% to 68.1%. Emissions of total PCDDs/PCDFs ranged between 0.0046 and 0.48 mg/kg of waste burned. Emissions are also presented in terms of 2,3,7,8-TCDD toxic equivalents. Emissions of PCDDs/PCDFs appear to correlate with both copper and hydrochloric acid emissions. The results of this study indicate that backyard burning emits more PCDDs/PCDFs on a mass of refuse burned basis than various types of municipal waste combustors (MWCs). Comparison of burn barrel emissions to emissions from a hypothetical modern MWC equipped with high-efficiency flue gas cleaning technology indicates that about 2-40 households burning their trash daily in barrels can produce average PCDD/PCDF emissions comparable to a 182 000 kg/day (200 ton/day) MWC facility. This study provides important data on a potentially significant source of emissions of PCDDs/PCDFs. Backyard burning of household waste in barrels is a common waste disposal practice for which pollutant emissions have not been well characterized. This study measured the emissions of several pollutants, including polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/PCDFs), from burning mixtures designed to simulate waste generated by a 'recycling' and a 'nonrecycling' family in a 208-L (55-gal) burn barrel at the EPA's Open Burning Test Facility. This paper focuses on the PCDD/PCDF emissions and discusses the factors influencing PCDD/PCDF formation for different test burns. Four test burns were made in which the amount of waste placed in the barrel varied from 6.4 to 13.6 kg and the amount actually burned varied from 46.6% to 68.1%. Emissions of total PCDDs/PCDFs ranged between 0.0046 and 0.48 mg/kg of waste burned. Emissions are also presented in terms of 2,3,7,8-TCDD toxic equivalents. Emissions of PCDDs/PCDFs appear to correlate with both copper and hydrochloric acid emissions. The results of this study indicate that backyard burning emits more PCDDs/PCDFs on a mass of refuse burned basis than various types of municipal waste combustors (MWCs). Comparison of burn barrel emissions to emissions from a hypothetical modern MWC equipped with high-efficiency flue gas cleaning technology indicates that about 2-40 households burning their trash daily in barrels can produce average PCDD/PCDF emissions comparable to a 182 000 kg/day (200 ton/day) MWC facility. This study provides important data on a potentially significant source of emissions of PCDDs/PCDFs.

Comparison of 2,4,6-trichlorophenol conversion to PCDD/PCDF on a MSWI- fly ash and a model fly ash

We performed experiments on two different matrices with 2,4,6- trichlorophenol as precursor to Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD)/F. A municipal solid waste incinerators (MSWI) and a model fly ash were spiked in two different ways. The experiments demonstrated a three times higher formation potential of the trichlorophenol to PCDD on MSWI fly ash compared with the model fly ash used. For both fly ashes the PCDD yield was higher when gaseous trichlorophenol was fed continuously compared to mixing the fly ashes prior to the experiments with the total amount of the precursor. Despite dilution of the fly ashes tenfold with an inactive matrix the conversion of the chlorophenol was very high. (C) 2000 Elsevier Science Ltd.

Determination of polychlorinated dibenzo-p-dioxins and dibenzo-furans in solid residues from wood combustion by HRGC/HRMS

PCDD/PCDF were determined in solid samples from wood combustion. The samples included grate ashes, bottom ashes, furnace ashes as well as fly and cyclone ashes. The solid waste samples were classified into bottom and fly ash from native wood and bottom and fly ash from waste wood. For each of the four classes concentration distribution patterns from individual congeners, the sums of PCDD/PCDF and the international toxicity equivalents (I-TEQ) values are given. The I-TEQ levels of fly ash from waste wood burning can be approximately up to two thousand times higher than the values from fly ashes of natural wood. The I-TEQ levels in bottom ashes from waste wood combustion systems are as low as the corresponding ashes from the combustion of native wood. Grate ash samples from waste wood combustion systems with low carbon burnout show high levels of PCDD/PCDF.

Estimation of dioxin emission from fires in chemicals

The formation of the 17 toxic 2,3,7,8-substituted-PCDDs and PCDFs during combustion of selected chemicals were measured by high-resolution GC/MS. The 16 chemicals studied were commonly used chlorinated pesticides, industrial chemicals, and PVC. In a series of experiments carried out in a DIN 53,436 furnace, 2.5 g of these compounds were burned at 500°C and 900°C, respectively. The resultant yields ranged from 740 ng ITEQ/g for pentachlorophenol, to below 0.01 ng ITEQ/g for PVC and dichlobenil. The results show that some chemicals generate PCDD/F in very high - possibly dangerous - amounts during burning, whereas others generate insignificant amounts. The influence of scale were studied for chlorobenzene and 4-chloro- 3-nitro-benzoic acid in additional experiments, carried out in a cone calorimeter burning 20 g substance, and in ISO 9705 room test burning about 50 kg. A good agreement between the results for large and small scale indicated that formation of PCCD/F during a fire may be estimated from laboratory experiments. This suggest laboratory test may be used to screen for chemicals posing a hazard for release of PCDD/F during fires.