68716-49-4Relevant articles and documents
Unreactive C-N Bond Activation of Anilines via Photoinduced Aerobic Borylation
Ji, Shuohan,Qin, Shengxiang,Yin, Chunyu,Luo, Lu,Zhang, Hua
supporting information, p. 64 - 68 (2021/12/27)
Unreactive C-N bond activation of anilines was achieved by photoinduced aerobic borylation. A diverse range of tertiary and secondary anilines were converted to aryl boronate esters in moderate to good yields with wide functional group tolerance under simple and ambient photochemical conditions. This transformation achieved the direct and facile C-N bond activation of unreactive anilines, providing a convenient and practical route transforming widely available anilines into useful aryl boronate esters.
Evaluation of the role of graphene-based Cu(i) catalysts in borylation reactions
Cid, M. B.,Díaz, Cristina,Franco, Mario,Lamsabhi, Al Mokhtar,Sainz, Raquel,Tortosa, Mariola
, p. 3501 - 3513 (2021/06/06)
Carbon-supported catalysts have been considered as macromolecular ligands which modulate the activity of the metallic catalytic center. Understanding the properties and the factors that control the interactions between the metal and support allows a fine tuning of the catalyzed processes. Although huge effort has been devoted to comprehending binding energies and charge transfer for single atom noble metals, the interaction of graphenic surfaces with cheap and versatile Cu(i) salts has been scarcely studied. A methodical experimental and theoretical analysis of different carbon-based Cu(i) materials in the context of the development of an efficient, general, scalable, and sustainable borylation reaction of aliphatic and aromatic halides has been performed. We have also examined the effect of microwave (MW) radiation in the preparation of these type of materials using sustainable graphite nanoplatelets (GNP) as a support. A detailed analysis of all the possible species in solution revealed that the catalysis is mainly due to an interesting synergetic Cu2O/graphene performance, which has been corroborated by an extensive theoretical study. We demonstrated through DFT calculations at a high level of theory that graphene enhances the reactivity of the metal in Cu2O against the halide derivative favoring a radical departure from the halogen. Moreover, this material is able to stabilize radical intermediates providing unexpected pathways not observed using homogeneous Cu(i) catalysed reactions. Finally, we proved that other common carbon-based supports like carbon black, graphene oxide and reduced graphene oxide provided poorer results in the borylation process.
Engaging Ag(0) single atoms in silver(I) salts-mediated C-B and C-S coupling under visible light irradiation
Cui, Enxin,Guo, Lirong,Li, Haibin,Qiao, Dan,Tung, Chen-Ho,Wang, Yifeng
, p. 255 - 263 (2021/09/06)
Silver(I) salts were found active in the borylation and sulfenylation of aryl iodides under visible light irradiation. The optimized borylation protocol using AgF did not need any additive, operated under very mild conditions, and well tolerated a broad scope of substrates and boron sources. Formation of Ag(0) single atoms (AgSAs) during the borylation reactions was examined using high-angle annular dark field aberration-corrected scanning transmission electron microscope (HAADF AC-STEM) and electron paramagnetic resonance (EPR). The activities of the silver(I) salts were affected by the anions and could be associated with their abilities in formation of AgSAs during the reactions. Kinetic studies showed that the deiodination rate was linearly correlated with the loading of AgSAs, and hence AgSAs were the true catalytic centers for the 1e?-reduction of the C-I moieties. The oxidation state of AgSAs kept 0 in both the resting and the working states. A “work-in-tandem” mechanism involving AgSAs as the catalytic centers and AgNPs as the light absorber to achieve the borylation of aryl iodides under visible light irradiation is proposed. The current approach not only provides an alternative system for borylation and sulfenylation of aryl iodides, but also reveals a new activity of silver(I) salts involving AgSAs under visible light irradiation.
Zinc Complexes with an Ethylene-Bridged Bis(β-diketiminate) Ligand: Syntheses, Structures, and Applications as Catalysts in the Borylation of Aryl Iodides
Li, Yafei,Dang, Yan,Li, Dawei,Pan, Huifen,Zhang, Liang,Wang, Li,Cao, Zhu,Li, Yahong
supporting information, p. 482 - 489 (2021/03/01)
A dinucleating bis(β-diketiminate) ligand with a flexible bridge has been employed to synthesize zinc complexes. The ligand, abbreviated H2L (H2L = N-(4-((2-((4-((2,6-diisopropylphenyl)imino)pent-2-en-2-yl)amino)ethyl)imino)pent-2-en-2-yl)-2,6-diisopropylaniline), was deprotonated with ZnEt2 to afford [LZn2Et2] (1). Reactions of 1 with 2 equiv of BnOH and nBuOH, respectively, gave access to [LZn2(OBn)2]·C6H14 (2·C6H14) and [LZn2(OnBu)2] (3). Treatment of 1 with 2 equiv of I2 in THF produced [LZn2I2(THF)2]·2THF (4·2THF). X-ray single-crystal diffraction analyses revealed that they are all heteroleptic bimetallic compounds with two metal centers being chelated by one ligand set. The structurally similar compounds 1 and 4·2THF possess approximate C2 symmetry, with two β-diketiminate units being arrayed in head-to-tail antiparallel mode. Thus, the molecular structures of 1 and 4·2THF exhibit a seesaw-like topology. The structures of 2·C6H14 and 3 are almost identical, in which two zinc atoms are shared by two ZnN2C3 six-membered rings, two Zn2ON2C2 seven-membered rings, and one Zn2O2 four-membered ring. Therefore, the metal cores of 2·C6H14 and 3 display a crownlike topology. All complexes are catalytically active for the borylation of aryl iodides with B2Pin2 (B2Pin2 = 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2′-bis(1,3,2-dioxaborolane). Complex 1 shows higher activity in comparison to 2, 3, and 4·2THF. The borylation reactions catalyzed by 1 could proceed under mild conditions and can be applied to a series of substrates with high functional group generality. This methodology thus represents a novel use of β-diketiminate zinc complexes for C-I borylation.
Cross-Coupling through Ag(I)/Ag(III) Redox Manifold
Demonti, Luca,Mézailles, Nicolas,Nebra, Noel,Saffon-Merceron, Nathalie
supporting information, p. 15396 - 15405 (2021/10/12)
In ample variety of transformations, the presence of silver as an additive or co-catalyst is believed to be innocuous for the efficiency of the operating metal catalyst. Even though Ag additives are required often as coupling partners, oxidants or halide scavengers, its role as a catalytically competent species is widely neglected in cross-coupling reactions. Most likely, this is due to the erroneously assumed incapacity of Ag to undergo 2e? redox steps. Definite proof is herein provided for the required elementary steps to accomplish the oxidative trifluoromethylation of arenes through AgI/AgIII redox catalysis (i. e. CEL coupling), namely: i) easy AgI/AgIII 2e? oxidation mediated by air; ii) bpy/phen ligation to AgIII; iii) boron-to-AgIII aryl transfer; and iv) ulterior reductive elimination of benzotrifluorides from an [aryl-AgIII-CF3] fragment. More precisely, an ultimate entry and full characterization of organosilver(III) compounds [K]+[AgIII(CF3)4]? (K-1), [(bpy)AgIII(CF3)3] (2) and [(phen)AgIII(CF3)3] (3), is described. The utility of 3 in cross-coupling has been showcased unambiguously, and a large variety of arylboron compounds was trifluoromethylated via [AgIII(aryl)(CF3)3]? intermediates. This work breaks with old stereotypes and misconceptions regarding the inability of Ag to undergo cross-coupling by itself.
Synthesis of arylboronates via the Pd-catalyzed desulfitative coupling reaction of sodium arylsulfinates with bis(pinacolato)diboron
Qiu, Di,Li, Songyi,Yue, Guanglu,Mao, Jinshan,Xu, Bei,Yuan, Xinyu,Ye, Fei
, (2021/11/04)
The desulfitative borylation reaction of sodium arylsulfinates with bis(pinacolato)diboron or bis(neopentylglycolato)diboron under palladium catalysis has been developed, allowing selective C-B bond formation to give arylboronates with a range of functional groups in moderate to good yields under mild reaction conditions. A gram-scale preparation as well as the cascade Suzuki-Miyaura cross-coupling of arylboronates demonstrated the potential practical utility in organic synthesis.
A compound. Electron transport material and organic electroluminescent device
-
Paragraph 0118-0119; 0123; 0128-0129; 0132, (2021/09/01)
The present application provides a compound of formula (I), which may be used in an electron transport material. The compound has the parent structure of electrosorption fragment biphenanthroline, has high bond energy among atoms, has good thermal stability, is favorable for solid accumulation of molecules, has strong electronic transition capability, can effectively reduce the driving voltage of an organic electroluminescent device, improves the current efficiency and prolongs the service life. The invention further provides an organic electroluminescent device comprising the compound of the general formula (I) and a display device.
Orthogonal Stability and Reactivity of Aryl Germanes Enables Rapid and Selective (Multi)Halogenations
Deckers, Kristina,Fricke, Christoph,Schoenebeck, Franziska
supporting information, p. 18717 - 18722 (2020/08/25)
While halogenation is of key importance in synthesis and radioimaging, the currently available repertoire is largely designed to introduce a single halogen per molecule. This report makes the selective introduction of several different halogens accessible. Showcased here is the privileged stability of nontoxic aryl germanes under harsh fluorination conditions (that allow selective fluorination in their presence), while displaying superior reactivity and functional-group tolerance in electrophilic iodinations and brominations, outcompeting silanes or boronic esters under rapid and additive-free conditions. Mechanistic experiments and computational studies suggest a concerted electrophilic aromatic substitution as the underlying mechanism.
Luminescent tungsten(vi) complexes as photocatalysts for light-driven C-C and C-B bond formation reactions
Chan, Kaai-Tung,Che, Chi-Ming,Du, Lili,Liu, Yungen,Phillips, David Lee,To, Wai-Pong,Tong, Glenna So Ming,Wu, Liang-Liang,Yu, Daohong
, p. 6370 - 6382 (2020/07/15)
The realization of photocatalysis for practical synthetic application hinges on the development of inexpensive photocatalysts which can be prepared on a large scale. Herein an air-stable, visible-light-absorbing photoluminescent tungsten(vi) complex which can be conveniently prepared at the gram-scale is described. This complex could catalyse photochemical organic transformation reactions including borylation of aryl halides, such as aryl chloride, reductive coupling of benzyl bromides for C-C bond formation, reductive coupling of phenacyl bromides, and decarboxylative coupling of redox-active esters of alkyl carboxylic acid with high product yields and broad functional group tolerance.
Para-selective borylation of monosubstituted benzenes using a transient mediator
Wu, Jie,Wang, Zengwei,Chen, Xiao-Yue,Wu, Yichen,Wang, Daoming,Peng, Qian,Wang, Peng
, p. 336 - 340 (2019/12/09)
Herein, we conceptualized a transient mediator approach that has the capability of para-selective C-H functionalization of monosubstituted aromatics. This approach is enabled by in situ generation of a versatile sulfonium salt via highly electrophilic phenoxathiine or thianthrene dication intermediate which can be readily generated from its sulfoxide with trifluoromethanesulfonic anhydride. Preliminary mechanistic study implied that the remarkable para selectivity might be related to the incredible electrophilicity of thianthrene dication intermediate. The versatility of this approach was demonstrated via para-borylation of various monosubstituted simple aromatics combining the sulfonium salt formation with further photocatalyzed transformation.
