Cobalt-catalyzed methoxycarbonylation of substituted dichlorobenzenes as an example of a facile radical anion nucleophilic substitution in chloroarenes

Article abstract of DOI:10.3390/molecules19055876

A thorough mechanistic study on cobalt-catalysed direct methoxycarbonylation reactions of chlorobenzenes in the presence of methyl oxirane on a wide range of substrates, including poly-and monochloro derivatives with multiple substituents, is reported. The results demonstrate that the reaction is potentially useful as it proceeds under very mild conditions (t = 62 °C, PCO = 1 bar) and converts aryl chlorides to far more valuable products (especially ortho-substituted benzoic acids and esters) in high yields. This transformation also offers another opportunity for the utilization of environmentally harmful polychlorinated benzenes and biphenyls (PCBs). This study is the first to discover an unexpected universal positive ortho-effect: the proximity of any substituent (including Me, Ph, and MeO groups and halogen atoms) to the reaction centre accelerates the methoxycarbonylation in chlorobenzenes. The effect of the ortho-substituents is discussed in detail and explained in terms of a radical anion reaction mechanism. The advantages of the methoxycarbonylation as a model for the mechanistic study of radical anion reactions are also illustrated.

Full text of DOI:10.3390/molecules19055876

Molecules 2014, 19, 5876-5897; doi:10.3390/molecules19055876
OPEN ACCESS
molecules
ISSN 1420-3049
www.mdpi.com/journal/molecules
Article
Cobalt-Catalyzed Methoxycarbonylation of Substituted
Dichlorobenzenes as an Example of a Facile Radical Anion
Nucleophilic Substitution in Chloroarenes
Tatyana S. Khaibulova 1, Irina A. Boyarskaya 1, Evgeny Larionov 2 and Vadim P. Boyarskiy 1,*
1
Chemistry Department, Saint Petersburg State University, Universitetskiy pr., 26, Staryj Petergof,
198504 St. Petersburg, Russia
2
Department of Organic Chemistry, University of Geneva, 30 Quai Ernest Ansermet, CH-1211,
Geneva 4, Switzerland
* Author to whom correspondence should be addressed; E-Mail: vadim.boyarskiy@chem.spbu.ru;
Fax: +7-812-4286-733.
Received: 9 April 2014; in revised form: 26 April 2014 / Accepted: 28 April 2014 /
Published: 6 May 2014
Abstract: A thorough mechanistic study on cobalt-catalysed direct methoxycarbonylation
reactions of chlorobenzenes in the presence of methyl oxirane on a wide range of
substrates, including poly- and monochloro derivatives with multiple substituents, is
reported. The results demonstrate that the reaction is potentially useful as it proceeds under
very mild conditions (t = 62 °C, PCO = 1 bar) and converts aryl chlorides to far more
valuable products (especially ortho-substituted benzoic acids and esters) in high yields.
This transformation also offers another opportunity for the utilization of environmentally
harmful polychlorinated benzenes and biphenyls (PCBs). This study is the first to discover
an unexpected universal positive ortho-effect: the proximity of any substituent (including
Me, Ph, and MeO groups and halogen atoms) to the reaction centre accelerates the
methoxycarbonylation in chlorobenzenes. The effect of the ortho-substituents is discussed
in detail and explained in terms of a radical anion reaction mechanism. The advantages of
the methoxycarbonylation as a model for the mechanistic study of radical anion reactions
are also illustrated.
Keywords: cobalt-catalysed methoxycarbonylation; aryl chlorides; synthesis of substituted
benzoic acids; radical anion nucleophilic substitution; ortho-effect

Molecules 2014, 19
5877
1. Introduction
In 1970 Bunnett and Kim [1] proposed a new mechanism for nucleophilic aromatic substitution in
non-activated aromatic compounds, which they called radical anion substitution (“unimolecular radical
nucleophilic substitution”, SRN1) after its key intermediate − a radical anion. In aromatic nucleophilic
substitution, this reaction mechanism was the last discovered and still remains far less studied than the
others [2]. At the same time, a growing number of examples have become known where reactions
proceeding via such a mechanism play an important role in organic synthesis [3–6] and in the
environment [7–15]. Therefore, the mechanistic study on radical anion substitution is very timely.
The reaction of aryl halide methoxycarbonylation catalysed with alkyl cobalt carbonyl complexes
(Scheme 1) provides an interesting model to study the principles of the radical anion transformations in
aryl halides [16–23].
Scheme 1. Methoxycarbonylation of aryl halides catalysed with alkyl cobalt carbonyl
complex in basic methanol.
Cobalt-catalysed hydroxy- and alkoxycarbonylation of iodo- and bromobenzenes in the system
NaH—sodium alcoholate—cobalt acetate (CoCRACO) has been known since 1979 [24,25]. The
authors proposed the radical anion mechanism for this reaction. Later it was shown that photochemical
initiation can be used in the carbonylation of bromobenzenes instead of a one-electron reducing agent
(NaH) [20,26–28].
Photochemical carbonylation of substituted chlorobenzenes using cobalt catalysts under low
pressure of CO (2 atm) was described in 1986 [29–32], where the maximum reactivity was noted for
substituted chlorobenzoic acids. Unfortunately, photochemical processes have a number of features
that make them difficult for preparative use and do not allow them to serve as a full-fledged model for
studying the radical anion nucleophilic substitution of aryl halides under dark conditions. Therefore, as
a model to study radical anion substitution in aryl chlorides, we have chosen the carbonylation reaction
catalysed by anionic alkyl cobalt carbonyl complex (Scheme 1), which occurs under atmospheric
pressure and does not require photochemical activation [16–23].
Such catalytic systems were first used for the carbonylation of substituted bromobenzenes
in 1985 [16]. Originally they were prepared in situ from cobalt carbonyl and alkyl halides or dimethyl
sulphate [16–21]. The main drawback of these systems was a low catalytic activity in carbonylation of
substituted chlorobenzenes. Activation of these inert aryl halides was achieved only after the catalyst
systems based on cobalt carbonyl and oxirane (or monoalkyl oxiranes) were developed [22,23].
When Co2(CO)8 is used in presence of methyl oxirane as a catalyst in basic methanol, the
methoxycarbonylation proceeds through the formation of an anionic cobalt lactone (Scheme 2) [23,33,34].
It was shown [23,34], that the key step of the process is the radical anion activation of the aryl halide
with the anionic cobalt complex. In addition to aryl bromides, some aryl chlorides take part in this
reaction, particularly the ones that we discovered in our previous studies: chloronaphthalene [22],
PCBs (polychlorinated benzenes) [35], and heteroaryl chlorides [36].

Molecules 2014, 19
Scheme 2. The catalytic cycle of the methoxycarbonylation in presence of methyl oxirane.
5878
The methoxycarbonylation of only a few dichlorobenzenes has been described under these
conditions [37]. At the same time, cobalt-catalysed methoxycarbonylation gives a good opportunity to
study the principles of the radical anion processes in chloroarenes. The advantages of this reaction as a
model for a mechanistic study in comparison to other radical anion transformations of aryl chlorides
are: (i) irreversibility of the methoxycarbonylation process; (ii) simplicity of conversion control; and
(iii) the relative ease of the resulting reaction products’ isolation and interpretation of their structures.
Therefore our task was to determine the reactivity of substituted chlorobenzenes in the
methoxycarbonylation reaction catalysed by cobalt carbonyl complexes. It has simultaneously pursued
two goals: to clarify the reaction’s synthetic possibilities and to use this reaction as a model to study
the radical anion substitution in chloroarenes.
2. Results and Discussion
First, it was necessary to determine whether chlorobenzene and its derivatives can be carbonylated
under the conditions used for the substituted bromobenzenes [22] (in methanol solution at atmospheric
pressure of CO and temperature 60–63 °C). Our study showed that unsubstituted chlorobenzene does
not react under these conditions. However, the ortho- and meta-dichlorobenzenes react readily to give
the methyl esters of the corresponding chlorobenzoic acids. Therefore diverse substituted dichlorobenzenes
were chosen as substrates to study the principles of the methoxycarbonylation reaction.
2.1. The Relative Reactivity of Substituted Dichlorobenzenes
We have studied the relative reactivity of several substituted dichlorobenzenes and their derivatives
(compounds 1–13, Figure 1) by the competitive reactions method.

Molecules 2014, 19
Figure 1. The relative reactivity of substituted dichlorobenzenes (C6H3Cl2X) in the
5879
cobalt-catalysed methoxycarbonylation. The C–Cl bond which is preferentially cleaved is
marked in red.
krel
CF3
Cl
2.7
Cl
13
O
Cl
1.6
Cl
Cl
12
Cl
Cl
Cl
F
1
Cl
Cl
Cl
11
0.9
0.6
0.8
Cl
10
Cl
9
Cl
Cl
Cl
Cl
Cl
0.42
6
Cl
8
7
Cl
0.26
Cl
5
Cl
Cl
0.2
F
0.17
0.15
0.1
Cl
Cl
4
0
Cl
Cl
3
Cl
Cl
Cl
1
2
The determination of the relative reaction rates (krel) was carried out via measurements of the
decreases in the initial substrate concentrations. GC analysis of reaction mixtures before and after
methoxycarbonylation was used as an analytical method. Control experiments showed that these aryl
halides are consumed in the system only as a result of the methoxycarbonylation reaction. Following
data were obtained on the relative reactivity of substituted dichlorobenzenes (Figure 1).
It is evident that the electron-withdrawing substituents X in meta-dichlorobenzenes (2,4-Cl2-C6H3-X)
accelerate the methoxycarbonylation reaction: the reaction rate increases in the order H < F < Cl <
COCH3 < CF3. It is not surprising given the nature of the nucleophilic substitution in aryl halides. In

Molecules 2014, 19
5880
addition, it is consistent with our earlier data on the electronic effects of substituents in the
methoxycarbonylation of substituted bromobenzenes [23].
At the same time, the presented results (Figure 1) indicate a complex effect of substituents on the
reaction rate. For example, the transition from meta-dichlorobenzene (4) to 2,4-dichlorotoluene (6)
also accelerates the methoxycarbonylation process, despite the electron-donating nature of the methyl
substituent. This indicates the presence of a special substituent effect, which cannot be described only
within the concept of the electronic influence. Greater reactivity of ortho-dichlorobenzene (7) in
comparison with meta-dichlorobenzene (4) (Figure 1) is another fact, which cannot be explained into
the frames of the substituents’ electronic influence on the aromatic substrate reactivity in the reaction.
These two contradictions suggest that the determining factor in the radical anion nucleophilic
substitution of aryl chlorides is not the nature of the substituents but rather their relative positions.
In this regard, the study of the effect of substituents position has become of great importance for the
determination of the nature of the substituents’ influence on the aryl chloride reactivity in the anion
radical nucleophilic substitution reactions.
2.2. Regioselectivity in the Methoxycarbonylation of Substituted Dichlorobenzenes
The data presented above shows only the overall substrate reactivity (without consideration of the
substituent position). In order to study the steric effects of substituents, we measured the
regioselectivity of the first stage for the methoxycarbonylation of the substituted dichlorobenzenes.
The essence of such an approach is to make difference between the chlorine atoms via the introduction
of a substituent into the dichlorobenzene molecule. For example, compound 9 has chlorine atom in the
ortho-position relative to the fluorine atom and the other one in the para-position. Determination of the
methoxycarbonylation regioselectivity for compound 9 allows us to determine where the influence of
fluorine atom is stronger, in the ortho-position or in the para-position. This method has the advantage
of comparing the intersubstrate selectivity definition, since it minimises the influence of extraneous
factors that may manifest themselves in other stages of the multistage process.
The methoxycarbonylation of compounds 1–15 was carried out up to low conversion
(usually 10%–40%) to define the regioselectivity of the first stage. The resulting monocarboxylic acids
were isolated (generally as their methyl esters) and their structures were determined by NMR analysis.
The only difficulty was to establish the structures of two isomeric products from the monocarbonylation of
compound 12 probably formed during the reaction mixture treatment (compounds 12b and 12c,
Scheme 3). The structure of unexpected product 12c was unambiguously determined by spectroscopic
and spectrometric methods (see Supplementary Information for details). Thus, despite the fact that the
reaction in this case yields a mixture of isomers, both obtained products showed a quantitative
regioselectivity for the methoxycarbonylation of compound 12 in the position which is ortho to the
acetyl substituent. Moreover, in all studied compounds 1–15, ortho-substituent directs reaction into
position 2 exclusively regardless its own nature (see Figure 1, Scheme 3 and Table 1). The regioselectivity
study indicates thus an unprecedented universal effect of ortho-substituents (including such ones as Me
in compound 6 and MeO in compound 14) observed in reactivity studies.

Molecules 2014, 19
5881
Scheme 3. Monocarbonylation of compound 12.
Table 1. The synthesis of the substituted benzoic acids a.
1. Co2(CO)8 (4-7.5 mol%)
methyl oxirane (1.8-3.0 eq)
R
R
O
K2CO3 (3.6 eq)
MeOH, CO (1 atm), 62 °C
Cl
OH
2. KOH (aq)
Entry
1
Substrate
Product
Isolated yield, %
82
2
3
73
63
Et
Cl
Cl
O
15
COCH3
4
CO2H
80
OCH3
16a
a For the reaction conditions see the Experimental Section.
The ortho-effect, observed in methoxycarbonylation reaction, is fundamentally different from the
effect of ortho-substitution described in the literature for reactions which proceed via the classical
aromatic nucleophilic substitution mechanism. For example, when methanolysis of substituted
chlorobenzene occurs via the SNAr mechanism, the reaction rate for the ortho-substituted aryl
chlorides is lower than for the corresponding para-substituted chlorobenzenes [38,39]. Thus, in
accelerating the methoxycarbonylation reaction with an ortho-substituent there is a fundamental
difference between the steric effect of substituents in the reactions of the radical anion substitution and
the same in aromatic nucleophilic substitution reactions (SNAr).
Positive ortho-effects in the radical anion substitution reactions have been observed previously by
several researchers but only for substituents that have the mesomeric acceptor effect [40–45]. For
example, there is a positive ortho-effect of the acetyl group for radical anion reactions of 2- and

Molecules 2014, 19
5882
4-chloroacetophenone, manifested in greater dehalogenation rate of 2-chloroacetophenone in comparison
with 4-chloroacetophenone in irradiated aqueous solutions [40] and during the reduction with
1,3-dimethyl-2-phenylbenzimidazoline [41]. A similar accelerating effect is demonstrated by
о-CN [42] and о-COPh [41] groups at dehalogenation and о-CO2Me group in reactions of methyl 2,5-
dichlorobenzoate or methyl 3,6-dichloro-2-methoxybenzoate with tin-centred [43,44] and sulphur
centred [45] nucleophiles.
Substituents in the ortho-position to the reaction center sometimes accelerate interactions of aryl
halides with transition metal complexes [46], but these examples refer to substituents that can act as
ligands: either heteroatoms with electron lone pairs or groups with multiple bonds. In these cases, the
cause of the positive ortho-effect is the ability to chelate with the substituents. The attack preference in
the ortho-position to methyl group observed in the studied methoxycarbonylation cannot thus
be explained.
2.3. Possible Driving Forces of the Ortho-Effect
The background for the observed positive ortho-effect might be the peculiarities of the mechanism
of cobalt-catalysed methoxycarbonylation. As noted earlier, this reaction proceeds via a radical anion
mechanism. Carbon-halogen bond breaking can occur concertedly or stepwise [47,48]. If the excitation
of the unpaired electron to low-lying vacant MOs and the following internal coordinates rearrangement
gives a structure of other geometry than the initial one, π-radical anion → σ-radical anion transfer can
be possible. In this case, both structures correspond to different local minima on the potential energy
surface of the radical anion ground state. It was shown that the reaction coordinate
π-radical anion → σ-radical anion transfer is associated with elongation of the C–X bond and
displacement of the halogen atom from the plane of the aromatic ring [49]. That is, in general terms,
the scheme of the C-X breaking is as follows (Scheme 4).
Scheme 4. The possible pathways of the C–X breaking for an aryl halide radical anion.
Depending on the substrate structure, the process of radical anion activation of the aryl halide
proceeds mainly via pathway I, II or III. Aryl chlorides with electron-withdrawing substituents
(viz. Ac and CN) in the aromatic ring as well as condensed aromatic system contain low-lying π*-orbitals
so the radical anion substitution for these substrates takes place mainly along pathway III [49].
Aryl bromides and aryl chlorides without acceptor substituents often react via the concerted
mechanism I [48]. Therefore the influence of the substituent on the reactivity of the aryl halide can be
fundamentally different, depending on which of these groups the aryl halide falls into.
A theoretical study on the electronic nature of radical anions for the family of halobenzonitrile and
haloacetophenone compounds was carried out by Pierini and Duca [49]. The authors explained
positive ortho-effect of the acetyl group on the fragmentation rate of haloacetophenone in terms of π*

Molecules 2014, 19
5883
and σ* orbital isomeric radical anions, their energy difference and the probability of an intramolecular
electron-transfer reaction from the π* to the σ* system. Santiago and coworkers [44,45] came to the
same conclusions about the impact of a methoxycarbonyl group, performing calculations for
substituted methyl benzoates. However, it should be noted that the main geometric, thermodynamic
and kinetic parameters of radicals and radical anion intermediates were determined in gas phase. This
increases the relative role of the radical anion of π-type.
One way to determine the reaction path is scanning of the radical anion potential energy surface
(PES) along the coordinate of the breaking C–Cl bond. We calculated the cross sections of PES for
anion radicals of substituted dichlorobenzenes 5, 12 and 13 at stretching coordinates of both C–Cl
bonds in each compound. Scanning the potential energy surface of radical anion along the reaction
coordinate was carried out with full optimization of other parameters at each scan step. The PES scan
studies have been performed at the B3LYP/6-31+G* level of theory (effects of methanol solvent were
accounted within PCM formalism).
The computational results for compound 12 are shown in Figure 2 (see Supplementary Information
for the energy profiles with other substrates). The electron transfer to a neutral molecule leads initially
to the formation of a radical anion RA of π-type. It is evident by the presence of a minimum in the
potential energy curves. The fragmentation of the radical anion is stepwise and occurs with the
activation barrier (Scheme 5). Therefore the reaction takes place along path III (Scheme 4).
Stabilisation of the π-type radical anion compared to the σ-radical anion in this case is due to the
conjugation of the phenyl ring and carbonyl group, leading to partial delocalisation of negative charge
and unpaired electron density at the substituent.
Figure 2. Relaxed potential energy diagram (employing optimised geometry at each point) for the
dissociation of chlorides anions from radical anion RA of compound 12. Structures of radical
anion RA and transition states TSpara and TSortho with the C–Cl bond distances are shown.
ortho C-Cl bond
para C-Cl bond
40
TSpara
29.0
30
20
TSortho
COCH3
Cl
18.6
10
0
Rpara
RA
-10
-20
-30
-40
COCH3
Rortho
Cl
1.6
1.8
2.0
C-Cl bond, A
2.2
2.4

Molecules 2014, 19
Scheme 5. Stepwise fragmentation of the radical anion of the dichlorobenzene 12.
5884
The C–Cl bond breaking in ortho-position to the substituent has a lower activation barrier
(18.6 kJ/mol) compared with C–Cl breaking in para-position (29.0 kJ/mol). This is in a full agreement
with the experimentally observed regioselectivity of the methoxycarbonylation reaction (Scheme 3).
Notably, the transition state TSpara which leads to the para C–Cl bond cleavage to give a radical Rpara
is a late TS compared with TSortho (Figure 2). We obtained similar results by calculating the possible
radical anions fragmentation pathways of PCBs, for which the reaction also proceeds by stepwise
path III [50,51].
For all other computationally studied substrates the ground state of the radical anions formed at the
stage of the intermolecular electron transfer are the radical/anion pair. Calculations of such systems are
more complicated. All these radical anions do not correspond to minimum on PES. Therefore the
decay of the radical anions is barrier-free (pathway I). The PE curves along the ortho- C–Cl bond
coordinates are the lowest for these substrates (see Supplementary Information). It may influence the
cleavage of the C–Cl bond at the ortho-position with respect to the substituent, which corresponds to
the experimental data on the selectivity of the methoxycarbonylation reaction.
Thus, the calculations show that in both cases of the reaction mechanism in a concerted or stepwise
process, the cleavage of the C–Cl bond in the ortho-position to the substituent is more energetically
favourable, regardless electron donating/withdrawing ability of the substituent. This is in a full
agreement with the experimentally observed ortho-effect of substitutions in the cobalt-catalysed
methoxycarbonylation of aryl chlorides.
2.4. Synthetic Importance
The feature of cobalt-catalysed aryl chlorides activation was used for the synthesis of substituted
chlorobenzoic acids from the corresponding dichlorobenzenes. Basic hydrolysis of the reaction mixture
after carbonylation followed by acidification gave several acids in good isolated yields (Table 1).
The carbonylation reaction can readily be scaled up to 100 mmol without serious loss of yield (69% vs. 73%
in case of 14). For the success of the reaction the substrate must have a substituent in ortho-position to
one of the chlorine atoms. At this position it has a strong orienting effect, which determines the
regioselectivity. Electronic effects of substituents do not play a large role (see product 14a); although
the acceptor substituent is preferable, as it increases the reaction rate and gives complete conversion of
substrate after the shorter reaction time. The observed “positive ortho-effect” is of a great importance

Molecules 2014, 19
5885
for the methoxycarbonylation reaction used in organic synthesis. It allows the methoxycarbonylation
of even substituted chlorobenzenes, which have several alternate donors into the benzene ring, such as
compound 16 (Table 1).
One should keep in mind in discussing of the synthetic role of the reaction that nitroaromatic
compounds inhibit the cobalt-catalysed methoxycarbonylation (as we have shown previously for aryl
bromides) [20,23,26–28]. Preparation of alkoxycarbonyl benzoic acids and benzene dicarboxylic acids
using the proposed method is also challenging, since most of the esters are hydrolyzed during the
process, and the resulting halogen carboxylate anions are inert in the methoxycarbonylation.
At the same time, the acyl groups are stable under the reaction conditions and have a strong
accelerating effect, which makes the proposed method useful in the synthesis of various substituted
acyl benzoic acids.
3. Experimental
3.1. General Information
Reactions were carried out under argon using a standard manifold with vacuum and argon lines and
with magnetic stirring in a jacketed glass reactor for thermostatic experiments equipped with septa or
reflux condensers with bubble-counters. All NMR spectra were recorded at ambient temperature on a
Bruker DPX 300 spectrometer at 300.13 (1H) and 75.03 (13C) MHz, respectively. The solvent was
CDCl3. The NMR spectra are referenced to tetramethylsilane as an internal standard (δ = 0 ppm) using
the signals of the residual protons of CHCl3 (7.26 ppm) in CDCl3. Multiplicities of signals are
described as follows: s = singlet, br. s = broad singlet, d = doublet, t = triplet, q = quartet, quint =
quintet, m = multiplet. Multiplicities in the 13C NMR spectra were determined by DEPT
measurements. ESI-HRMS were obtained on TOF Micromass LCT spectrometer (Bruker). Elemental
analyses were performed in the Organic Analytical Laboratory of St. Petersburg State University
Chemistry Department with CHNS elemental analyser Euro EA 3028 – HT. GC system (Chrom-5):
PID, the carrier gas—argon (20–30 mL/min). Glass column packed with SE-30 (10%) on Chromaton
N-Super (80–100 mesh) as support was used for the analysis, diameter of 3 mm, length 2500 mm.
Evaporator temperature 200 °C. The column temperature ranged from 130 °C to 200 °C depending on
the studied pairs of substrates. Regular analytical TLC analyses were performed on MERCK ready-to-
use plates with silica gel 60 (F254). Column chromatography: Merck silica gel, grade 60, 0.040–0.063
mm. Infrared spectra (4000–400 cm−1) were recorded on a Shimadzu FTIR-8400S instrument using
KBr pellets. Commercially available organic and inorganic reagents (chemically pure grade) were used
without further purification. Potassium carbonate (p.a.) was dried at 150 °C for 6 h. Cobalt carbonyl
is a commercial reagent (Merck Millipore, Russia). 5-Chloro-4-methoxy-3-methylacetophenone and
2,5-dichloropropiophenone were granted for research by “Vekton Ltd”. (St. Petersburg, Russia).
2,4- and 2,5-Dichlorobiphenyls were synthesised via the Cadogan reaction with the standard
procedure [52]. 2,4,4'- and 2,4',5-Trichlorobiphenyls were obtained by chlorination of the corresponding
dichlorobiphenyls with the standard procedure [53].

Molecules 2014, 19
5886
3.2. Quantum Chemical Calculations
The quantum chemical calculations were performed using Gaussian 03 software [54] employing the
Becke three parameter hybrid exchange in conjunction with the correlation functional developed by
Lee, Yang and Parr (B3LYP). The 6-31+G(d) basis set was employed for the structural optimisation in
methanol. The open shell model (unrestricted) was used for the anionic radicals and neutral molecules,
respectively. The polarisable continuum model has been employed for the solvent. The relaxed based
potential energy scanning (full energy optimization at each step) was performed for the radical anions
as a function of the C–Cl bond distance in steps of 0.05 Å.
3.3. General Procedure for Blank Experiments
K2CO3 (2.5 g, 18 mmol) and methanol (10 mL) were placed in a jacketed glass reactor. The
intensively stirred mixture was subjected to a flow of carbon monoxide, preliminary passed through
methanol, at room temperature for 20 min followed by the insertion of Со2(СО)8 (0.050 g, 0.15 mmol)
under a CO atmosphere. After the orange colour disappearance, the reaction mixture was heated to
62 °C, and methyl oxirane (0.35 g, 6 mmol) was added via syringe. The reaction mixture was stirred
for 10 min and air was bubbled through the mixture for 5 min at 62 °C to destroy the catalytic
complex. After that the flask was stopped with a septum again and a solution of an appropriate amount
of the two studied substrates and the corresponding internal standard for GC in methanol (1 mL) was
added to the reaction mixture (Solution A). The resulting mixture was stirred at 62 °C for 2 h. After
that a sample of the reaction mixture (0.2–0.3 mL) was taken, diluted with 1 mL of water and extracted
2 times with hexane. The organic layer was analysed with GC and compared with the sample of solution A.
3.4. General Procedure I for Competitive Methoxycarbonylation
K2CO3 (2.5 g, 18 mmol), methanol (10 mL), an appropriate amount of the two studied substrates,
and the corresponding internal standard for GC (see below) were placed in a jacketed glass reactor. A
sample of the reaction mixture (0.2–0.3 mL) was taken for GC analysis. The intensively stirred
mixture was subjected to flow of carbon monoxide, preliminary passed through methanol, at room
temperature for 20 min followed by the insertion of Со2(СО)8 (0.050 g, 0.15 mmol) under CO
atmosphere. The orange colour of the mixture disappeared after 5 min, indicating tetracarbonyl
cobaltate salt formation according to reaction (1) [55]:
3Со2(СО)8 + 2K2СО3 → 4KСо(СО)4 + 2CoСО3 + 8CO
(1)
The reaction mixture was heated to 62 °C, and methyl oxirane (0.35 g, 6 mmol) was added via
syringe. The conversion was controlled by measurement of the volume of absorbed carbon monoxide.
The reaction was carried out until the combined conversions of the substrates had reached 30%–70%.
After that a sample of the reaction mixture (0.2–0.3 mL) was taken. Both samples were diluted each
with 1 mL of water and extracted two times with hexane. The organic layers were analysed by GC.
The relative rate constants were determined from the ratio of unreacted substrates in the reaction
mixture after the carbonylation. Blanks experiments showed that concentrations of the starting
aryl halides did not diminished in the absence of methyl oxirane, which indicates the absence of side

Molecules 2014, 19
5887
reactions of the substrates in the reaction mixture. Preservation of the material balance testified to
the same.
3.4.1. Competitive Methoxycarbonylation of 1,2-Dichlorobenzene (7) and 1,3-Dichlorobenzene (4)
The reaction was carried out according to general procedure I with 7 (429 mg, 2.9 mmol), 4 (347 mg,
2.4 mmol) and tert-butylbenzene (internal standard, 45 mg, 0.34 mmol). The conversion of the starting
compounds was 30% and 13% for 7 and 4, respectively.
3.4.2. Competitive Methoxycarbonylation of 1,2-Dichlorobenzene (7) and 1,4-Dichlorobenzene (1)
The reaction was carried out according to general procedure I with 7 (438 mg, 3.0 mmol),
1 (350 mg, 2.4 mmol) and tert-butylbenzene (internal standard, 45 mg, 0.34 mmol). The conversion of
the starting compounds was 48% and <3% for 7 and 1, respectively.
3.4.3. Competitive Methoxycarbonylation of 1,2-Dichlorobenzene (7) and 1,2,4-Trichlorobenzene (11)
The reaction was carried out according to general procedure I with 7 (560 mg, 4.6 mmol),
11 (843 mg, 3.3 mmol) and 1,2,4,5-tetrametylbenzene (internal standard, 74 mg, 0.55 mmol). The
conversion of the starting compounds was 28% and 53% for 7 and 11, respectively.
3.4.4. Competitive Methoxycarbonylation of 1,2,4-Trichlorobenzene (11) and 2,4-Dichloro-1-Fluoro-
benzene (9)
The reaction was carried out according to general procedure I with 11 (259 mg, 1.43 mmol), 9 (128 mg,
0.78 mmol), and naphthalene (internal standard, 78 mg, 0.61 mmol). The conversion of the starting
compounds was 33% and 28% for 11 and 9, respectively.
3.4.5. Competitive Methoxycarbonylation of 1,2,4-Trichlorobenzene (11) and 1,4-Dichloro-2-Fluoro-
benzene (3)
The reaction was carried out according to general procedure I with 11 (275 mg, 1.5 mmol), 3 (176 mg,
1.1 mmol) and naphthalene (internal standard, 79 mg, 0.62 mmol). The conversion of the starting
compounds was 69% and 26% for 11 and 3, respectively.
3.4.6. Competitive Methoxycarbonylation of 1,2,4-Trichlorobenzene (11) and 1,3,5-Trichlorobenzene (10)
The reaction was carried out according to general procedure I with of 11 (208 mg, 1.15 mmol), 10
(206 mg, 1.13 mmol) and naphthalene (internal standard, 54 mg, 0.42 mmol). The conversion of the
starting compounds was 45% and 41% for 11 and 10, respectively.
3.4.7. Competitive Methoxycarbonylation of 1,2,4-Trichlorobenzene (11) and 2,4-Dichlorobiphenyl (5)
The reaction was carried out according to general procedure I with of 11 (53 mg, 0.3 mmol), 5 (390 mg,
1.75 mmol) and acenaphthene (internal standard, 32 mg, 0.21 mmol). The conversion of the starting
compounds was 70% and 23% for 11 and 5, respectively.

Molecules 2014, 19
5888
3.4.8. Competitive Methoxycarbonylation of 2,4-Dichlorobiphenyl (5) and 2,4,4'-Trichlorobiphenyl (8)
The reaction was carried out according to general procedure I with 5 (242 mg, 1.09 mmol), 8 (260 mg,
1.00 mmol) and 1,2-diphenylethane (internal standard, 40 mg, 0.22 mmol). The conversion of the
starting compounds was 27% and 61% for 5 and 8, respectively.
3.4.9. Competitive Methoxycarbonylation of 2,4-Dichlorobiphenyl (5) and 2,4',5-Trichlorobiphenyl (2)
The reaction was carried out according to general procedure I with of 5 (183 mg, 0.82 mmol), 2
(150 mg, 0.58 mmol) and 1,2-diphenylethane (internal standard, 42 mg, 0.23 mmol). The conversion
of the starting compounds was 43% and 25% for 5 and 2, respectively.
3.4.10. Competitive Methoxycarbonylation of 1,2,4-Trichlorobenzene (11) and 2,4-Dichloroaceto-
phenone (12)
The reaction was carried out according to general procedure I with of 11 (121 mg (0.66 mmol), 12
(401 mg, 2.1 mmol) and naphthalene (internal standard, 49 mg, 0.38 mmol). The conversion of the
starting compounds was 25% and 34% for 11 and 12, respectively.
3.4.11. Competitive methoxycarbonylation of 2,4-Dichlorobiphenyl (5) and 2,4-Dichloroaceto-
phenone (12)
The reaction was carried out according to general procedure I with 5 (497 mg, (2.2 mmol), 12 (142 mg,
0.75 mmol) and acenaphthene (internal standard, 39 mg, 0.25 mmol). The conversion of the starting
compounds was 11% and 64% for 5 and 12, respectively.
3.4.12. Competitive Methoxycarbonylation of 1,3-Dichlorobenzene (4) and 2,4-Dichlorotoluene (6)
The reaction was carried out according to general procedure I with 4 (308 mg, 2.09 mmol), 6 (434 mg,
2.69 mmol) and tert-butylbenzene (internal standard, 42 mg, 0.31 mmol). The conversion of the
starting compounds was 44% and 59% for 4 and 6, respectively.
3.4.13. Competitive Methoxycarbonylation of 1,2,4-Trichlorobenzene (11) and 2,4-Dichlorotoluene (6)
The reaction was carried out according to general procedure I with 11 (489 mg, 2.69 mmol), 6 (277 mg,
1.68 mmol) and naphthalene (internal standard, 43 mg, 0.34 mmol). The conversion of the starting
compounds was 75% and 30% for 11 and 6, respectively.
3.4.14. Competitive Methoxycarbonylation of 1,2,4-Trichlorobenzene (11) and 2,4-Dichloro-1-
(trifluoromethyl)benzene (13)
The reaction was carried out according to general procedure I with 11(310 mg, 1.71 mmol), 13 (234 mg,
0.96 mmol) and naphthalene (internal standard, 116 mg, 0.91 mmol). The conversion of the starting
compounds was 54% and 87% for 11 and 13, respectively.

Molecules 2014, 19
5889
3.5. General Procedure II for Determination of Methoxycarbonylation Regioselectivity
K2CO3 (2.5 g, 18 mmol), methanol (10 mL), and appropriate amount of substrate (see below) were
placed in a jacketed glass reactor. The intensively stirred mixture was subjected to flow of carbon
monoxide, preliminary passed through methanol, at room temperature for 20 min followed by the
insertion of Со2(СО)8 (0.050 g, 0.15 mmol) under CO atmosphere. The orange colour of the mixture
disappeared after 5 min. The reaction mixture was heated to 62 °C, and methyl oxirane (0.35 g,
6 mmol) was added by a syringe. The conversion was controlled by measurement of the absorbed
carbon monoxide volume. After reaching of the desired conversion (see below) the reaction mixture
was cooled to room temperature and an excess of thionyl chloride (about 0.6 g, 5 mmol) was carefully
added into the reaction mixture to pH < 2. The mixture was kept at room temperature for 24 h. A small
sample was taken, dissolved with DCM and H2O, and the organic layer was analysed by GC to check
the conversion. Then the solvent and excess of thionyl chloride were removed from the reaction
mixture under reduced pressure. The rest was dissolved with DCM and H2O, the organic layer was
divided, washed with brine, and dried with Na2SO4. The solvent was removed under reduced pressure,
the resulting mixture was analysed by TLC and 1H-NMR methods, and then the methoxycarbonylation
products were isolated by column chromatography (eluent—ethyl acetate-hexane, 1:5). The
regioselectivity of methoxycarbonylation for compounds 2, 3, 5, 8, 9 and 11 has been reported by us
previously [36,38].
3.5.1. Methoxycarbonylation of 2,4-Dichlorotoluene (6)
The reaction was carried out according to general procedure II with 6 (1.5 g, 9.3 mmol) till a 27%
conversion. Two liquid fractions were isolated from the reaction mixture in addition to the recovered
starting substrate. The first was a mixture of methyl esters of two isomeric chlorotoluenic acids
1
(according to H-NMR and MS data), total yield 400 mg (23%). The isomers was identified by
1H-NMR spectroscopy:
Methyl 5-chloro-2-methylbenzoate (6a) [56], Rf = 0.54 (ethyl acetate-hexane, 1:5), content in the
1
mixture was 83%. H-NMR: δ = 7.91 (d, J = 2 Hz, 1Н), 7.38 (dd, J = 2 Hz, J = 8 Hz, 1Н), 7.20 (d,
J = 8 Hz, 1Н), 3.91 (s, 3Н, OCH3), 2.58 (s, 3Н, СН3) ppm.
Methyl 3-chloro-4-methylbenzoate (6b) [57], Rf = 0.52 (ethyl acetate-hexane, 1:5), content in the
1
mixture was 17%. H-NMR: δ = 8.02 (d, J = 2 Hz, 1Н), 7.83 (dd, J = 2 Hz, J = 8 Hz, 1Н), 7.31 (d,
J = 8 Hz, 1Н), 3.93 (s, 3Н, OCH3), 2.44 (s, 3Н, СН3) ppm.
The second fraction was dimethyl 4-methylisophthalate (6c) [58], Rf = 0.42 (ethyl acetate-hexane, 1:5).
The yield: 18 mg (1%). 1H-NMR: δ = 8.59 (d, J = 2 Hz, 1Н), 8.06 (dd, J = 2 Hz, J = 8 Hz, 1Н), 7.35
13
(d, J = 8 Hz, 1Н), 3.95 (s, 3Н, OCH3), 3.94 (s, 3Н, OCH3), 2.68 (s, 3Н, СН3) ppm; C NMR: δ =
167.58 (С, CO2CH3), 166.73 (C, CO2CH3), 145.97 (C), 133.03 (CH), 132.37 (CH), 132.29 (CH),
130.15 (C), 128.36 (C), 52.60 (СH3, CO2CH3), 52.44 (СH3, CO2CH3), 30.10 (C, СH3) ppm; MS (ESI):
m/z (positive mode, %) = 209 (100) [M+H+], 231 (10) [M+Na+]; HRMS (C11H12O4) 209.0830 (found
M+H), 209.0814 (calc.), 231.0633 (found M+Na), 231.0633 (calc.).

Molecules 2014, 19
5890
3.5.2. Methoxycarbonylation of 2,4-Dichloroacetophenone (12)
The reaction was carried out according to general procedure II with 12 (302 mg, 1.6 mmol) till a
45% conversion. Two methoxycarbonylation products were isolated from the reaction mixture. The
first was 6-chloro-3-methoxy-3-methylisobenzofuran-1(3H)-one (12c), Rf = 0.52 (ethyl acetate-hexane,
1:5). Yield 40 mg (19%), isolated as a white crystals, m.p. 49–50 °C. 1H-NMR: δ = 7.86 (d, J = 2 Hz,
1Н), 7.70 (dd, J = 2 Hz, J = 8 Hz, 1Н), 7.45 (d, J = 8 Hz, 1Н), 3.10 (s, 3Н, ОСН3), 1.84 (s, 3Н, СН3)
ppm; 13C-NMR: δ = 167.0 (C, C-1), 146.1 (C), 137.4 (CH, C-5), 135.3 (C), 129.5 (C), 125.9 (CH, C-7),
124.0 (CH, C-4), 109.1 (C, C-3), 51.8 (СН3, OCH3), 25.6 (CH3, C-8) ppm; IR (KBr): v = 1774 cm−1
(C=O); MS (ESI): m/z (positive mode, %)=213 (5) [M+H+], 235 (100) [M+Na+], 251 (15) [M+K+];
HRMS (ESI): m/z calcd for C10H9ClO3+H+: 213.0318 [M+H+]; found: 213.0312; calcd for
C10H9ClO3+Na+: 235.0138 [M+Na+]; found: 235.0139; calcd for C10H9ClO3+K+: 250.9877 [M+K+];
found: 250.9877; elemental analysis calcd (%) for C10H9ClO3: C 56.49, H 4.27; found: C 56.66, H 4.15.
The second product was methyl 2-acetyl-5-chlorobenzoate (12b) [59], Rf = 0.40 (ethyl acetate-
hexane, 1:5). Yield 40 mg (19%), isolated as an yellow oil. 1H-NMR: δ = 7.82 (br. s, 1Н), 7.54 (br. d,
J = 8 Hz, 1Н), 7.41 (d, J = 8 Hz, 1Н), 3.92 (s, 3Н, ОСН3), 2.55 (s, 3Н, СН3) ppm; 13C-NMR: δ = 201.0
(СОСН3), 166. 1 (С, СО2СН3), 140.0 (С, С-5), 136.0 (С, С-2), 131.8 (СН, С-3), 131.5 (С, С-1), 130.5
(СН, С-4), 127.9 (СН, С-6), 52.5 (СН3, ОСН3), 29.3 (СН3) ppm; IR (KBr): v =1727 cm−1 (C=O in
CO2Me), 1697 cm−1 (C=O); MS (ESI): m/z (positive mode, %) = 213 [M+H+] (82), 235 [M+Na+] (100),
251 [M+K+] (71); HRMS (ESI): m/z calcd for C10H9ClO3+H+: 213.0318 [M+H+]; found: 213.0313;
calcd for C10H9ClO3+Na+: 235.0138 [M+Na+]; found: 235.0132; calcd for C10H9ClO3+K+: 250.9877
[M+K+]; found: 250.9881.
For additional identification 12b was saponified with boiling solution of КОН (0.4 g) in a
methanol/water mixture (1:1, 20 mL) for 3 h. Methanol was removed, water (5 mL) was added and the
reaction mixture was acidified by HCl till рН < 1. The precipitate of 2-acetyl-5-chlorobenzoic acid
1
(12a) [60] (10 mg) was filtered off and dried; m.p. 121–122 °С; H-NMR: δ = 7.81 (d, J = 2 Hz 1H),
7.64 (br. d, J = 8 Hz, 1Н), 7.48 (d, J = 8 Hz, 1Н), 2.00 (s, 3Н, СН3) ppm.
3.5.3. Methoxycarbonylation of 2,4-Dichloro-1-(Trifluoromethyl)Benzene (13)
The reaction was carried out according to general procedure II with 13 (2.0 g, 9.3 mmol)
till
a
10% conversion. The methoxycarbonylation product was methyl 5-chloro-2-
(trifluoromethyl)benzoate (13a) [61], Rf =0.52 (ethyl acetate-hexane, 1:5). Yield 200 mg (8.8%),
isolated as a colorless oil. 1H-NMR: δ = 7.79 (d, J = 2 Hz, 1Н), 7.70 (d, J = 8 Hz, 1Н), 7.58 (dd, J = 2 Hz,
13
J = 8 Hz, 1Н), 3.96 (s, 3Н, OCH3) ppm; C-NMR: δ = 166.2 (CO2CH3), 138.6 (C, С-5), 132.4 (q,
J2С-F = 94 Гц, С, С-2), 131.6 (СН), 130.9 (СН), 128.6 (q, J3С-F = 5 Hz, СН, С-3), 127.5 (С), 123.4 (q,
J1С-F = 273 Hz, С, СF3), 53.5 (ОСН3) ppm; MS (ESI): m/z (positive mode, %) = 239 (58) [M+H+], 261
(100) [M+Na+]; HRMS (C8H6F3ClO4) 239.0082 (found M+H), 239.0081 (calc.), 260.9890 (found
M+Na), 260.9901 (calc.).

Molecules 2014, 19
5891
3.6. Preparation of Substituted Benzoic Acids
3.6.1. Methoxycarbonylation of 2,4-Dichloroacetophenone (12) to Acid 12a
The reaction was carried out according to general procedure II with 12 (680 mg, 3.6 mmol) for 2 h
to reach the full conversion. After absorption of CO had finished, H2O (2 mL) was added to the
reaction flask and the mixture was stirred at 62 °С for 3 h. Methanol was removed, water (5 mL)
was added and the reaction mixture was acidified with HCl to a рН < 1. The precipitate of
2-acetyl-5-chlorobenzoic acid (12a) [60] (586 mg, 82%) was filtered off and dried; m.p. 120–121 °С.
3.6.2. Methoxycarbonylation of 2,4-Dichloroanisole (14)
The reaction was carried out according to general procedure II with 14 (350 mg, 2.0 mmol) for 4 h
till an 80% conversion. After absorption of CO had finished, H2O (2 mL) was added to the reaction
flask and the mixture was stirred at 62 °С for 3 h. The resulting mixture was cooled and dissolved with
DCM (20 mL) and H2O (20 mL). The aqueous layer was divided, acidified with aq. HCl to pH = 3–4,
and extracted with DCM. The white precipitate formed was filtered off and dried. The resulting
product was 5-chloro-2-methoxybenzoic acid (14a) [62], isolated as a colorless oil, which solidified
slowly. Yield 270 mg (73%). 1H-NMR: δ = 8.17 (d, J = 3 Hz, 1Н), 7.55 (dd, J = 3 Hz, J = 9 Hz, 1Н),
7.03 (d, J = 9 Hz, 1Н), 4.10 (s, 3Н, OСН3) ppm.
3.6.3. Methoxycarbonylation of 2,5-Dichloropropiophenone (15)
The reaction was carried out according to general procedure II with 15 (700 mg, 3.5 mmol) for 2 h
to reach the full conversion. After absorption of CO had finished, H2O (2 mL) was added to the
reaction flask and the mixture was stirred at 62 °С for 3 h. The resulting mixture was cooled and
dissolved with DCM (20 mL) and H2O (20 mL). The aqueous layer was divided and acidified with aq.
HCl to pH=3−4. The white precipitate formed was filtered off and dried. The resulting product was
5-chloro-3-ethyl-3-hydroxyisobenzofuran-1(3H)-one (15a). Yield 460 mg (63%), m.p. 107−108 °C.
1H-NMR: δ = 7.73 (d, J = 9 Hz, 1Н), 7.54–7.51 (m, 2Н), 5.54 (br. s, 1Н, ОН), 2.21–2.10 (m, 2Н,
13
СН2), 0.89 (t, J = 8 Hz, 3Н, СН3) ppm; C-NMR: δ = 168.5 (С, С=О), 150.6 (С), 141.8 (С), 131.6
(СН), 127.1 (СН), 125.6 (С), 123.3 (СН), 108.3 (С), 32.3 (СН2), 8.1 (СН3) ppm; MS (ESI): m/z
(positive mode, %) = 213 (26) [M+H+], 231 (77) [M+Na+], 251 (100) [M+K+]; HRMS (ESI): m/z calcd
for C10H9ClO3+H+: 213.0318 [M+H+]; found: 213.0357; calcd for C10H9ClO3+Na+: 235.0138
[M+Na+]; found: 235.0171; calcd for C10H9ClO3+K+: 250.9877 [M+K+]; found: 250.9897; elemental
analysis calcd (%) for C10H9ClO3: C 56.49, H 4.27; found: C 56.42, H 4.17.
3.6.4. Methoxycarbonylation of 5-Chloro-4-Methoxy-3-Methylacetophenone (16)
The reaction was carried out according to general procedure II with 16 (480 mg, 2.4 mmol) for 2 h
to reach the full conversion. After absorption of CO had finished, H2O (2 mL) was added to the
reaction flask and the mixture was stirred at 62 °С for 3 h. The resulting mixture was cooled and
dissolved with DCM (20 mL) and H2O (20 mL). The aqueous layer was divided and acidified with aq.
HCl to pH = 3–4. The white precipitate formed was filtered off and dried. The resulting product was

Molecules 2014, 19
5892
1
5-acetyl-2-methoxy-3-methylbenzoic acid (16a). Yield 400 mg (80%), m.p. 122−123 °C. H-NMR:
δ = 8.53 (d, J = 2 Hz, 1Н), 8.09 (d, J = 2 Hz, 1Н), 4.00 (s, 3Н, OСН3), 2.65 (s, 3Н, СН3), 2.45 (s, 3Н,
13
СН3) ppm; C-NMR: δ = 197.0 (С, СО), 168.2 (C), 162.5 (C), 136.4 (С), 133.6 (СН), 133.4 (СН),
131.8 (С), 123.0 (С), 62.6 (СН3, СО2СН3), 27.0 (СН3, СОСН3), 16.7 (СН3) ppm; MS (ESI): m/z
(positive mode, %) = 209 (100) [M+H+], 231 (13) [M+Na+], 247 (29) [M+K+]; HRMS (ESI): m/z calcd
for C11H12O4+H+: 209.0814 [M+H+]; found: 209.0808; calcd for C11H12O4+Na+: 231.0633 [M+Na+];
found: 231.0628; calcd for C11H12O4+K+: 247.0373 [M+K+]; found: 247.0369; elemental analysis
calcd (%) for C11H12O4: C 63.45, H 5.81; found: C 63.36, H 5.70.
3.6.5. Scaled Procedure for Preparative Reaction
K2CO3 (50 g, 0.36 mol), methanol (250 mL), and 14 (17.7 g, 0.10 mol) were placed in a three-neck
round bottom flask equipped with an inner thermometer, a gas inlet, a rubber stopper, and a magnetic
stirring bar. The intensively stirred mixture was subjected to a flow of carbon monoxide, first passed
through methanol (the rubber stopper was changed to a bubble counter for this time), at room
temperature for 20 min followed by the insertion of Со2(СО)8 (1.4 g, 0.004 mol) under CO
atmosphere. The orange colour of the mixture disappeared after 5 min. The reaction mixture was
heated to 62 °C (inner temperature), and methyl oxirane (8.0 g, 0.14 mol) was added via syringe. After
several minutes the temperature increased to 63–64 °C, and the reaction proceeded at this temperature.
The conversion was controlled by measurement of the absorbed carbon monoxide volume. After 2 h
the reaction decelerated strongly, and an additional portion of methyl oxirane (4.0 g, 0.07 mol) was
added via syringe. When the absorption of CO was stopped the reaction mixture was cooled to 50–55 °C
and 15% aq. KOH (30 mL) was added to the reaction mixture. The mixture was refluxed until the
formed ester was hydrolysed completely (TLC control, the rate is depended of the ester structure
strongly). Then methanol was removed from the reaction mixture under reduced pressure. The rest was
dissolved with H2O, filtered and acidified with aq. HCl. The precipitate of 14a was filtered off, washed
with H2O, crystallised with aq. EtOH and dried. Yield 12.9 g (69%).
4. Conclusions
The cobalt-catalysed methoxycarbonylation of aryl chlorides is potentially very interesting from a
synthetic point of view, as well as theoretically. It was found that a variety of polychlorinated benzenes
and some substituted monochlorobenzenes with multiple subsituents undergo methoxycarbonylation
reactions under very mild conditions (t = 62 °C, PCO = 1 atm). Experiments showed that any
substituents in the ortho-position to the reactive chlorine atom strongly accelerate this reaction, which
proceeds via the radical anion nucleophilic substitution mechanism. In accelerating of a reaction with
an ortho-substituent there is a fundamental difference between the steric effect of substituents in the
reactions of the radical anion substitution and the same in aromatic nucleophilic substitution reactions
(SNAr). The quantum chemical calculation confirmed that the cleavage of the C-Cl bond in
ortho-position to the substituent in the benzene ring is more energetically favourable in radical anion
processes. This is one of the driving forces for the unusual universal ortho-effect of substitutions in the
cobalt-catalysed methoxycarbonylation of aryl chlorides. This effect can be a background for a

Molecules 2014, 19
5893
synthetically useful method for the preparation of ortho-substituted benzoic acids starting from easily
available aryl chlorides.
Supplementary Materials
Supplementary materials can be accessed at: http://www.mdpi.com/1420-3049/19/5/5876/s1.
Acknowledgments
The authors thank Saint-Petersburg State University for a research grant (12.38.195.2014) and
Russian Fund for Basic Research (Grant 14-03-00297-a).
Author Contributions
Author contributions are equal.
Conflicts of Interest
Authors declare no conflict of interest.
References
1. Kim, J.K.; Bunnett, J.F. Evidence for a radical mechanism of aromatic “nucleophilic”
substitution. J. Am. Chem. Soc. 1970, 92, 7463–7464.
2. Smith, M.B.; March, J. Advanced Organic Chemistry: Reactions, Mechanisms, and Structure,
6th ed.; John Wiley & Sons, Inc.: Hoboken, NJ, USA, 2007.
3. Rossi, R.A.; Lukach, A.E. Some synthetic applications of the aromatic radical nucleophilic
substitution reactions. In Electron Transfer Reactions in Organic Synthesis; Vanelle, P., Ed.;
Research Signpost: Trivandrum, Kerala, India, 2002; pp. 43–61.
4. Rossi, R.A.; Corsico, E.F. Reactions of Me3Sn- ions with aryl chlorides by the SRN1 mechanism
followed by Pd(0)-catalyzed reactions. A novel approach in organic synthesis. Main Group
Met. Chem. 2002, 25, 99–106.
5. Sperotto, E.; van Klink, G.P.M.; van Koten, G.; de Vries, J.G. The mechanism of the modified
Ullmann reaction. Dalton Trans. 2010, 39, 10338–10351.
6. Rossi, R.A. Recent advances in the synthesis of stannanes and the scope of their posterior
chemical transformations. J. Organomet. Chem. 2014, 751, 201–212.
7. Tiedje, J.M.; Quesen, J.F.; Chee-Sanford, J. Microbial reductive dechlorination of PCBs.
Biodegradation 1993, 4, 231–240.
8. Dolfing, J. Reductive dechlorination of 3-chlorobenzoate is coupled to ATP production and
growth in an anaerobic bacterium, strain DCB-1. Arch. Microbiol. 1990, 153, 264–266.
9. Mohn, W.W.; Tiedje, J.M. Evidence for chemiosmotic coupling of reductive dechlorination and
ATP synthesis in Desulfomonile tiedjei. Arch. Microbiol. 1991, 157, 1–6.
10. Costentin, C.; Robert, M.; Savéant, J.-M. Electron transfer and bond breaking: Recent advances.
Chem. Phys. 2006, 324, 40–56.

Molecules 2014, 19
5894
11. Pop, S.M.; Gupta, N.; Raza, A.S.; Ragsdale, S.W. Transcriptional Activation of
Dehalorespiration: Identification of Redox-Active Cysteines Regulating Dimerization and DNA
Binding. J. Biol. Chem. 2006, 281, 26382–26390.
12. Bhatt, P.; Kumar, M.S.; Mudliar, S.; Chakrabarti, T. Biodegradation of chlorinated
compounds—a review. Crit. Rev. Environ. Sci. Technol. 2007, 37, 165–198.
13. Field, J.A.; Sierra-Alvarez, R. Microbial transformation of chlorinated benzoates. Rev. Environ.
Sci. Bio/Technol. 2008, 7, 191–210.
14. Pieper, D.H.; Seeger, M. Bacterial Metabolism of Polychlorinated Biphenyls. J. Mol. Microbiol.
Biotechnol. 2008, 15, 121–138.
15. Stenuit, B.; Lamblin, G.; Cornelis, P.; Agathos, S.N. Aerobic Denitration of 2,4,6-Trinitrotoluene
in the Presence of Phenazine Compounds and Reduced Pyridine Nucleotides. Environ. Sci.
Technol. 2012, 46, 10605–10613.
16. Francalanci, F.; Foa, M.; Gardano, A.; Bencini, E. Cobalt-catalyzed carbonylation of aryl halides.
J. Organomet. Chem. 1985, 285, 293–303.
17. Francalanci, F.; Foa, M. Recent developments in cobalt-catalyzed carbonylation. J. Mol. Catal.
1987, 41, 89–107.
18. Miura, M.; Akase, F.; Nomura, M.; Shinohara, M. Carbonylation of aryl halides and vinyl bromides
mediated by tetracarbonylcobalt anion. J. Chem. Soc. Perkin Trans. 1 1987, 1021–1025.
19. Zhesko, T.E.; Boyarskii, V.P.; Beletskaya, I.P. Carbonylation of aromatic halides in the
Co2(CO)8-alkyl halide-base system. Metalloorganicheskaya Khim. 1989, 2, 385–387.
20. Marchal, J.; Bodiguel, J.; Fort, Y.; Caubere, P. A New indirect application of aggregative
activation: Synthesis of esters by cobalt-catalyzed carbonylation of aryl, heterocyclic, and vinyl
Halides under atmospheric pressure. J. Org. Chem. 1995, 60, 8336–8340.
21. Zhesko, T.E.; Boyarskii, V.P.; Nikitina, A.G. Carbonylation of aryl halides catalyzed by modified
cobalt carbonyls. Russ. J. Gen. Chem. 1998, 68, 78–82.
22. Boyarskii, V.P.; Zhesko, T.E.; Lanina, S.A. Synthesis of Aromatic carboxylic acids by
carbonylation of aryl halides in the presence of epoxide-modified cobalt carbonyls as Catalysts.
Russ. J. Appl. Chem. 2005, 78, 1844–1848.
23. Boyarskii, V.P.; Larionov, E.V.; Polyakova, S.M.; Boyarskaya, I.A.; Zhesko, T.E. Mechanism of
the catalytic carbonylation of aryl halides with a modified cobalt carbonyl. Russ. J. Gen. Chem.
2007, 77, 915–922.
24. Brunet, J.J.; Sidot, C.; Caubere, P.; Loubinoux, B. Activation of reducing agents. Sodium hydride
containing complex reducing agents. 10. NaH-RONa-Co(OAc)2-CO, a new reagent for the
carbonylation of aryl halides at atmospheric pressure. J. Org. Chem. 1979, 44, 2199–2202.
25. Brunet, J.J.; Sidot, C.; Caubere, P. Activation of reducing agents. Sodium hydride containing
complex reducing agents: XIV. NaCoCO4 as an SRN1 nucleophile in the carbonylation of aryl
halides by CoCRACO at atmospheric pressure. New preparation of NaCoCO4 by NaH reduction
of dicobalt octacarbonyl. J. Organomet. Chem. 1980, 204, 229–241.
26. Brunet, J.J.; Sidot, C.; Caubere, P. Cobalt carbonyl catalyzed sRN1 carbonylation of aryl and vinyl
halides by phase transfer catalysis. Tetrahedron Lett. 1981, 22, 1013–1016.
27. Brunet, J.J.; Sidot, C.; Caubere, P. Sunlamp-irradiated phase-transfer catalysis. 1. Cobalt carbonyl
catalyzed SRN1 carbonylations of aryl and vinyl halides. J. Org. Chem. 1983, 48, 1166–1171.

Molecules 2014, 19
5895
28. Vanderesse, R.; Marchal, J.; Caubere, P. An efficient cobalt catalyzed alkoxycarbonylation of aryl
and heteroaryl halides. Synth. Commun. 1993, 23, 1361–1370.
29. Kashimura, T.; Kudo, K.; Mori, S.; Sugita, N. Cobalt carbonyl catalyzed polycarbonylation of
polyhalogenated aromatics under photostimulation. Chem. Lett. 1986, 15, 299–302.
30. Kashimura, T.; Kudo, K.; Mori, S.; Sugita, N. Cobalt carbonyl-catalyzed double-carbonylation of
o-halogenated benzoic acids under photostimulation. Chem. Lett. 1986, 15, 483–486.
31. Kashimura, T.; Kudo, K.; Mori, S.; Sugita, N. Cobalt carbonyl-catalyzed polycarbonylation of aryl
halides in sodium methoxide/methanol under photostimulation. Chem. Lett. 1986, 15, 851–854.
32. Kashimura, T.; Kudo, K.; Mori, S.; Sugita, N. Cobalt salt-catalyzed carbonylation of aromatic
halides under photostimulation. Chem. Lett. 1987, 16, 577–580.
33. Boyarskii, V.P.; Boyarskaya, I.A.; Duka, G.G. Calculation of the possibility of formation of a
cyclic metallolactone anionic complex in the methyloxirane-potassium tetracarbonylcobaltate
system. Russ. J. Gen. Chem. 2008, 78, 1380–1381.
34. Boyarskii, V.P.; Duka, G.G.; Boyarskaya, I.A. Participation of cyclic cobaltolactone anionic complex
in the catalytic cycle of aryl halides carbonylation. Russ. J. Gen. Chem. 2009, 79, 2449–2451.
35. Lanina, S.A.; Boyarskii, V.P.; Zhesko, T.E.; Nikiforov, V.A.; Bart, T.Ya. Carbonylation of
polychlorinated biphenyls over cobalt carbonyl catalyst modified with propylene oxide. Russ. J.
Gen. Chem. 2008, 78, 127–132.
36. Boyarskii, V.P.; Zhesko, T.E.; Larionov, E.V.; Polukeev, V.A. Synthesis of heteroaromatic
carboxylic acids by carbonylation of heteroaryl halides with catalysts based on cobalt carbonyl
modified with epoxides. Russ. J. Appl. Chem. 2007, 80, 571–575.
37. Boyarskiy, V.P.; Fonari, M.S.; Khaybulova, T.S.; Gdaniec, M.; Simonov, Y.A. Chemoselectivity
of cobalt-catalysed carbonylation—A reliable platform for the synthesis of fluorinated benzoic
acids. J. Fluor. Chem. 2010, 131, 81–85.
38. Evstifeev, A.V.; Shein, S.M. Nucleophilic aromatic substitution. XXXIV Medium effect on the
rate of reactions between ortho- and para-substituted chlorobenzenes and sodium alcoholates.
Zh. Org. Khim. 1969, 5, 919–923.
39. Evstifeev, A.V.; Shein, S.M. Mechanism of electrophilic and basic catalysis in reactions of o- and
p-substituted halobenzenes with alkali metal alcoholates in an alcohol medium. Zh. Org. Khim.
1972, 8, 746–751.
40. Behar, D.; Neta, P. Intramolecular electron transfer and dehalogenation of anion radicals. 4.
Haloacetophenones and related compounds. J. Am. Chem. Soc. 1981, 103, 2280–2283.
41. Tanner, D.D.; Chen, J.J.; Chen, L.; Luelo, C. Fragmentation of substituted acetophenones and
halobenzophenone ketyls. Calibration of a mechanistic probe. J. Am. Chem. Soc. 1991, 113,
8074–8081.
42. Neta, P.; Behar, D. Intramolecular electron transfer and dehalogenation of anion radicals. 3.
Halobenzonitriles and cyanobenzyl halides. J. Am. Chem. Soc. 1981, 103, 103–106.
43. Basso, S.M.; Montañez, J.P.; Santiago, A.N. Synthesis and evaluation of phytotoxicity of disugran
analogs. Lett. Org. Chem. 2008, 5, 633–639.
44. Montañez, J.P.; Uranga, J.G.; Santiago, A.N. Regioselectivity of methyl chlorobenzoate
analogues with trimethylstannyl anions by radical nucleophilic substitution: Theoretical and
experimental study. New J. Chem. 2010, 34, 1170–1175.

Molecules 2014, 19
5896
45. Uranga, J.G.; Montañez, J.P.; Santiago, A.N. Theoretical and experimental study on the reactivity
of methyl dichlorobenzoates with sulfur-centered nucleophiles by electron transfer reactions.
Tetrahedron 2012, 68, 584–589.
46. Zhao, H.; Fu, H.; Qiao, R. Copper-Catalyzed Direct Amination of Ortho-Functionalized
Haloarenes with Sodium Azide as the Amino Source. J. Org. Chem. 2010, 75, 3311–3316.
47. Rossi, R.A.; Pierini, A.B.; Peñéñory, A.B. Nucleophilic Substitution Reactions by Electron
Transfer. Chem. Rev. 2003, 103, 71–167.
48. Robert, M.; Costentin, C.; Savéant, J.-M. Fragmentation of Aryl Halide π Anion Radicals.
Bending of the Cleaving Bond and Activation vs Driving Force Relationships. J. Am. Chem. Soc.
2004, 126, 16051–16057.
49. Pierini, A.B.; Duca, J.S. Theoretical study on haloaromatic radical anions and their intramolecular
electron transfer reactions. J. Chem. Soc. Perkin Trans. 2 1995, 9, 1821–1828.
50. Muthukrishnan, A.; Sangaranarayanan, M.V.; Boyarskiy, V.P.; Boyarskaya, I.A. Regioselective
electrochemical reduction of 2,4-dichlorobiphenyl – Distinct standard reduction potentials for
carbon–chlorine bonds using convolution potential sweep voltammetry. Chem. Phys. Lett. 2010,
490, 148–153.
51. Muthukrishnan, A.; Boyarskiy, V.; Sangaranarayanan, M.V.; Boyarskaya, I. Mechanism and
Regioselectivity of the Electrochemical Reduction in Polychlorobiphenyls (PCBs): Kinetic
Analysis for the Successive Reduction of Chlorines from Dichlorobiphenyls. J. Phys. Chem. C
2012, 116, 655–664.
52. Mullins, M.D.; Pochini, C.M.; McCrindle, S.; Romkes, M.; Safe, S.H.; Safe, L.M.
High-resolution PCB analysis: Synthesis and chromatographic properties of all 209 PCB
congeners. Environ. Sci. Technol. 1984, 18, 468–476.
53. Nikiforov, V.; Wightman, R. Reaction of nitroarenes and arenesulfonylchlorides with
hexachlorocyclopentadiene. Chimia 1997, 51, 452.
54. Frisch, A.M.J.; Trucks, G.W.; Shelelgel, H.B.; Scuseria, G.E.; Robb, M.A.; Cheeseman, J.R.;
Montgomery, J.A., Jr.; Vreven, T.; Kudin, K.N.; Burant, J.C.; et al. Gaussian 03, Revision C.02;
Gaussian, Inc.: Wallingford, CT, USA, 2003.
55. Hebrard, F.; Kalck, P. Cobalt-Catalyzed Hydroformylation of Alkenes: Generation and Recycling
of the Carbonyl Species, and Catalytic Cycle. Chem. Rev. 2009, 109, 4272–4282.
56. Peltier, D.; Pichevin, A. The carboxyl group. Infrared absorption and ionization. Bull. Soc. Chim.
France 1960, 1141–1147.
57. Stempel, G.H., Jr.; Greene, C.; Rongone, R.; Sobel, B.; Odioso, R. Some Disubstituted
α-Methylstyrenes and their Polymerization Characteristics and a Comparative Study of the
Refractive Indexes of Substituted Styrenes and α-Methylstyrenes. J. Am. Chem. Soc. 1951, 73,
455–456.
58. Egbertson, M.S.; Vassallo, L.M.; Hartman, G.D.; Halczenko, W.; Whitman, D.B.; Perkins, J.J.;
Krause, A.E.; Ihle, N.; Claremon, D.A.; Hoffman, W.; et al. Fibrinogen Receptor Antagonists.
U.S. Patent 5648368 A1, 15 July 1997.
59. Springfield, S.A.; Doubleday, W.W.; Buono, F.; Couturier, M.A.; Lear, Y.; Favreau, D.;
Levesque, K.; Manchand, P.S.; Frieser, M.; Cocuzza, A.J.; et al. Process for preparation of
1,7-dichloro-4-methoxy-isoquinoline. PCT Int. Appl. WO 2010027889 A2 20100311, 2010.

Molecules 2014, 19
5897
60. Lukaćs, G.; Porcs-Makkay, M.; Simig, G. Lithiation of 2-(chloroaryl)-2-methyl-1,3-dioxolanes
and application in synthesis of new ortho-functionalized acetophenone derivatives. Tetrahedron Lett.
2003, 44, 3211–3214.
61. Bhatt, R.; Gong, B.; Hong, F.; Jenkins, S.A.; Klein, J.P.; Kumar, A.M.; Tulinsky, J. Preparation of
6-phenyl-N-phenyl-[1,3,5]triazine-2,4-diamine derivatives and related compounds with
lysophosphatidic acid acyltransferase β (LPAAT-β) inhibitory activity for use in the treatment of
cancer. PCT Int. Appl. WO 2003037346 A1 20030508, 2003.
62. Alessi, T.R.; Ellingboe, J.W. Preparation of novel substituted 3H-1,2,3,5-oxathiadiazole 2-oxides
as hypoglycemics. U.S. Patent US 4895860 A, 23 January 1990.
Sample Availability: Not available.
© 2014 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article
distributed under the terms and conditions of the Creative Commons Attribution license
(http://creativecommons.org/licenses/by/3.0/).