Technology Process of perovskite
There total 133 articles about perovskite which
guide to synthetic route it.
The literature collected by LookChem mainly comes from the sharing of users and the free literature resources found by Internet computing technology. We keep the original model of the professional version of literature to make it easier and faster for users to retrieve and use. At the same time, we analyze and calculate the most feasible synthesis route with the highest yield for your reference as below:
synthetic route:
- Guidance literature:
-
With
Na2CO3; K2CO3; acetic acid;
In
melt;
stoich. mixt. of constituents heating (800°C, corundum crucible, without or with Na2CO3/K2CO3 melt additives at various ratios (optimum ratio (Na,K)2CO3:(CaCO3+TiO2)=1:1)), quenching in air; unreacted carbonates removal (treatment with aq. acetic acid);
Kinetics;
- Guidance literature:
-
With
PVA;
In
solid;
byproducts: Ca(OH)2; Electrolysis; mixt. milled (30 min), PVA added, dried (air, 24 h), pressed (110 MPa), sintered (air, tube furnace, 5°C/min, 1300 °C), electrolysis (Ar, molten CaCl2, graphite anode, 3.2 V, 6 h); detd. by XRD;
DOI:10.1016/j.jallcom.2008.07.018
- Guidance literature:
-
In
further solvent(s);
byproducts: Al, Ti; Irradiation (UV/VIS); Ca5(PO4)3(OH) mixed with LISI W 15853 organic solvent, sprayed on Al-Ti-V alloy, air dried, scanned with Nd:YAG laser at 10, 20, 30 or 40 Hz, total on/off times 750/149.250, 1500/148.500, 2250/147.750, 3000/147.000 μs respectively; detd. by XRD;
DOI:10.1016/j.jallcom.2009.07.162