YTTERBIUM(III) ACETATE HYDRATE

Base Information

• Chemical Name: YTTERBIUM(III) ACETATE HYDRATE
• CAS No.: 15280-58-7
• Molecular Formula: C6H17O10Yb
• Molecular Weight: 422.23
• Hs Code.: 2915299090
• Mol file: 15280-58-7.mol

Synonyms:Ytterbiumacetate, tetrahydrate (7CI);Ytterbium triacetate tetrahydrate;

Chemical Property of YTTERBIUM(III) ACETATE HYDRATE

Chemical Property:

• Appearance/Colour: white fine crystalline powder
• Boiling Point: 117.1oC at 760mmHg
• Flash Point: 40oC
• PSA: 115.82000
• Density: 2,09 g/cm3
• LogP: -0.21580
• Storage Temp.: Inert atmosphere,Room Temperature
• Water Solubility.: Insoluble in water, moderately soluble in strong mineral acids.

Purity/Quality:

98%,99%, ^*data from raw suppliers

Ytterbium(III) acetate hydrate (99.9%-Yb) (REO) ^*data from reagent suppliers

Safty Information:

• Safety Statements: 24/25

MSDS Files:

SDS file from LookChem

Useful:

• Uses: Thulium sulfate octahydrate, also called Thulium Sulphate, has specialized uses in ceramics, glass, phosphors, lasers, also is the important dopant for fibre amplifiers. Thulium Sulfate is a moderately water and acid soluble Thulium source for uses compatible with Sulfates. Sulfate compounds are salts or esters of Sulfuric acid formed by replacing one or both of the Hydrogens with a metal. Yttrium Acetate is widely applied in electronic ceramics, glass, and electronics. Yttrium compounds are used as a catalyst for ethylene polymerization. Yttrium is used in the production of a large variety of synthetic garnets, and Yttria is used to make Yttrium Iron Garnets, which are very effective microwave filters.

Technology Process of YTTERBIUM(III) ACETATE HYDRATE

There total 3 articles about YTTERBIUM(III) ACETATE HYDRATE which guide to synthetic route it. The literature collected by LookChem mainly comes from the sharing of users and the free literature resources found by Internet computing technology. We keep the original model of the professional version of literature to make it easier and faster for users to retrieve and use. At the same time, we analyze and calculate the most feasible synthesis route with the highest yield for your reference as below:

synthetic route:

Reference yield:

ytterbium hydroxide → ytterbium(III) acetate tetrahydrate (15280-58-7)

Guidance literature:

With acetic acid; In acetic acid; aq. acetic acid; 25% acetic acid, 70 to 80°C, evapn.; filtered, washed with ether, dried at 30 to 35°C to constant weight;

Reference yield:

ytterbium(III) oxide + acetic acid (64-19-7,77671-22-8) → ytterbium(III) acetate tetrahydrate (15280-58-7)

Guidance literature:

In acetic acid; prepn. according to T. A. Starostina et al., Zh. Neorgan. Khimii, 1992, vol. 37, p. 2402-2405;

DOI:10.1134/S0020168509050197

Reference yield:

ytterbium(III) oxide + water (7732-18-5) + acetic acid (64-19-7,77671-22-8) → ytterbium(III) acetate tetrahydrate (15280-58-7)

Guidance literature:

In water; oxide, glacial acetic acid, H2O stirred while heating to 80-90°C until complete dissolution of oxide; cooled; acetate collected on filter; filtrate evapd. near dryness; combined; washed (hexane); filtered off; dried (vac. 1 Pa) for 3 h;

DOI:10.1134/S0020168509030133

upstream raw materials:

water

acetic acid

Refernces

• 1、 Korchagina,Ivanov,Proidakova, V. Yu.,Rush,Rybakova,Sadovskaya. "Synthesis, structure, and properties of solid solutions based on bismuth ferrite". . p. 568 - 573. Retrieved 2009/09/24.