1009647-55-5

Basic information

• Product Name: methyl 2-[4-(2-methylpropanoyl)phenyl]propanoate
• Synonyms: methyl 2-[4-(2-methylpropanoyl)phenyl]propanoate
• CAS NO: 1009647-55-5
• Molecular Weight: 234.295
• Mol File: 1009647-55-5.mol

Chemical Properties

• CAS DataBase Reference: methyl 2-[4-(2-methylpropanoyl)phenyl]propanoate(CAS DataBase Reference)
• NIST Chemistry Reference: methyl 2-[4-(2-methylpropanoyl)phenyl]propanoate(1009647-55-5)
• EPA Substance Registry System: methyl 2-[4-(2-methylpropanoyl)phenyl]propanoate(1009647-55-5)

Safety Data

• Hazardous Substances Data: 1009647-55-5(Hazardous Substances Data)

Upstream product

• 61566-34-5 (+/-)-ibuprofen methyl ester 

Relevant articles and documents

Visible-light-induced selective aerobic oxidation of sp3 C-H bonds catalyzed by a heterogeneous AgI/BiVO4 catalyst

An efficient oxidation of sp3 C-H bonds to esters and ketones has been developed using AgI/BiVO4 as the photocatalyst and O2 as the oxidant in water. Various substrates can be transformed into the desired esters and ketones in moderate to good yields. The synthetic utility of this approach has been demonstrated by gram-level experiments and consecutive oxidation experiments. A plausible mechanism has been proposed.

Iron Complex Catalyzed Selective C-H Bond Oxidation with Broad Substrate Scope

The use of a peroxidase-mimicking Fe complex has been reported on the basis of the biuret-modified TAML macrocyclic ligand framework (Fe-bTAML) as a catalyst to perform selective oxidation of unactivated 3° C-H bonds and activated 2° C-H bonds with low catalyst loading (1 mol %) and high product yield (excellent mass balance) under near-neutral conditions and broad substrate scope (18 substrates which includes arenes, heteroaromatics, and polar functional groups). Aliphatic C-H oxidation of 3° and 2° sites of complex substrates was achieved with predictable selectivity using steric, electronic, and stereoelectronic rules that govern site selectivity, which included oxidation of (+)-artemisinin to (+)-10β-hydroxyartemisinin. Mechanistic studies indicate FeV(O) to be the active oxidant during these reactions.

Manganese terpyridine artificial metalloenzymes for benzylic oxygenation and olefin epoxidation

New catalysts for non-directed hydrocarbon functionalization have great potential in organic synthesis. We hypothesized that incorporating a Mn-terpyridine cofactor into a protein scaffold would lead to artificial metalloenzymes (ArMs) in which the selectivity of the Mn cofactor could be controlled by the protein scaffold. We designed and synthesized a maleimide-substituted Mn-terpyridine cofactor and demonstrated that this cofactor could be incorporated into two different scaffold proteins to generate the desired ArMs. The structure and reactivity of one of these ArMs was explored, and the broad oxygenation capability of the Mn-terpyridine catalyst was maintained, providing a robust platform for optimization of ArMs for selective hydrocarbon functionalization.

Metal- And additive-free C-H oxygenation of alkylarenes by visible-light photoredox catalysis

A metal- and additive-free methodology for the highly selective, photocatalyzed C-H oxygenation of alkylarenes under air to the corresponding carbonyls is presented. The process is catalyzed by an imide-acridinium that forms an extremely strong photooxidant upon visible light irradiation, which is able to activate inert alkylarenes such as toluene. Hence, this is an easy to perform, sustainable and environmentally friendly oxidation that provides valuable carbonyls from abundant, readily available compounds.

Electrochemical benzylic oxidation of C-H bonds

Oxidized products have become increasingly valuable as building blocks for a wide variety of different processes and fine chemistry, especially in the benzylic position. We report herein a sustainable protocol for this transformation through C-H functionalization and is performed using electrochemistry as the main power source and tert-butyl hydroperoxide as the radical source for the C-H abstraction. The temperature conditions reported here do not increase above 50 °C and use an aqueous-based medium. A broad substrate scope is explored, along with bioactive molecules, to give comparable and increased product yields when compared to prior reported literature without the use of electrochemistry.

Electrochemical C-H oxygenation and alcohol dehydrogenation involving Fe-oxo species using water as the oxygen source

High-valent iron-oxo complexes are key intermediates in C-H functionalization reactions. Herein, we report the generation of a (TAML)Fe-oxo species (TAML = tetraamido macrocyclic ligand) via electrochemical proton-coupled oxidation of the corresponding (TAML)FeIII-OH2 complex. Cyclic voltammetry (CV) and spectroelectrochemical studies are used to elucidate the relevant (TAML)Fe redox processes and determine the predominant (TAML)Fe species present in solution during bulk electrolysis. Evidence for iron(iv) and iron(v) species is presented, and these species are used in the electrochemical oxygenation of benzylic C-H bonds and dehydrogenation of alcohols to ketones.

Direct Oxidation of Csp3?H bonds using in Situ Generated Trifluoromethylated Dioxirane in Flow

A fast, scalable, and safer Csp3?H oxidation of activated and un-activated aliphatic chains can be enabled by methyl(trifluoromethyl)dioxirane (TFDO). The continuous flow platform allows the in situ generation of TFDO gas and its rapid reactivity toward tertiary and benzylic Csp3?H bonds. The process exhibits a broad scope and good functional group compatibility (28 examples, 8–99 %). The scalability of this methodology is demonstrated on 2.5 g scale oxidation of adamantane.

Development of a Flow Photochemical Aerobic Oxidation of Benzylic C-H Bonds

A continuous mesofluidic process has been developed for benzylic C-H oxidation with moderate to good yields using a photocatalyst (riboflavin tetraacetate, RFT) activated by a UV lamp and an iron additive [Fe(ClO4)2] via incorporation of singlet oxygen (1O2) for the direct formation of oxidized C=O or CH-OH compounds.

A unified photoredox-catalysis strategy for C(sp3)-H hydroxylation and amidation using hypervalent iodine

We report a unified photoredox-catalysis strategy for both hydroxylation and amidation of tertiary and benzylic C-H bonds. Use of hydroxyl perfluorobenziodoxole (PFBl-OH) oxidant is critical for efficient tertiary C-H functionalization, likely due to the enhanced electrophilicity of the benziodoxole radical. Benzylic methylene C-H bonds can be hydroxylated or amidated using unmodified hydroxyl benziodoxole oxidant Bl-OH under similar conditions. An ionic mechanism involving nucleophilic trapping of a carbocation intermediate by H2O or CH3CN cosolvent is presented.

Unified oxidation protocol for the synthesis of carbonyl compounds using a manganese catalyst

We have developed a unified protocol for the oxidation of ethers, benzylic compounds, and alcohols to carbonyl compounds. The protocol uses catalytic amounts of manganese(II) chloride tetrahydrate and tri(t-butyl)-2,2':6',2Prime;- terpyridine in combination with a stoichiometric amount of either m-chloroperbenzoic acid (MCPBA) or potassium hydrogen peroxysulfate (KHSO 5). A reagent system consisting of the Mn catalyst and MCPBA permitted the chemoselective sp3 C-H oxidation of alkyl ethers and benzylic compounds to generate the corresponding ketones. Alternatively, the water-soluble inorganic salt KHSO5 in combination with the Mn catalyst was used to oxidize alcohols to ketones or carboxylic acids. Importantly, the Mn catalyst/KHSO5 system eliminates technical difficulties associated with the isolation of carboxylic acid products. All the oxidations presented in this feature article proceed at sup-ambient temperature in an aerobic atmosphere, and can therefore be used in practical syntheses of complex organic molecules. Georg Thieme Verlag Stuttgart · New York.