125604-06-0Relevant academic research and scientific papers
Mechanochemical, Water-Assisted Asymmetric Transfer Hydrogenation of Ketones Using Ruthenium Catalyst
Kolcsár, Vanessza Judit,Sz?ll?si, Gy?rgy
, (2022/01/04)
Asymmetric catalytic reactions are among the most convenient and environmentally benign methods to obtain optically pure compounds. The aim of this study was to develop a green system for the asymmetric transfer hydrogenation of ketones, applying chiral Ru catalyst in aqueous media and mechanochemical energy transmission. Using a ball mill we have optimized the milling parameters in the transfer hydrogenation of acetophenone followed by reduction of various substituted derivatives. The scope of the method was extended to carbo- and heterocyclic ketones. The scale-up of the developed system was successful, the optically enriched alcohols could be obtained in high yields. The developed mechanochemical system provides TOFs up to 168 h?1. Our present study is the first in which mechanochemically activated enantioselective transfer hydrogenations were carried out, thus, may be a useful guide for the practical synthesis of optically pure chiral secondary alcohols.
Deep eutectic solvents as H2-sources for Ru(II)-catalyzed transfer hydrogenation of carbonyl compounds under mild conditions
Cavallo, Marzia,Arnodo, Davide,Mannu, Alberto,Blangetti, Marco,Prandi, Cristina,Baratta, Walter,Baldino, Salvatore
supporting information, (2021/02/22)
The employment of easily affordable ruthenium(II)-complexes as pre-catalysts in the transfer hydrogenation of carbonyl compounds in deep eutectic media is described for the first time. The eutectic mixture tetrabutylammonium bromide/formic acid = 1/1 (TBABr/HCOOH = 1/1) acts both as reaction medium and hydrogen source. The addition of a base is required for the process to occur. An extensive optimization of the reaction conditions has been carried out, in terms of catalyst loading, type of complexes, H2-donors, reaction temperature and time. The combination of the dimeric complex [RuCl(p-cymene)-μ-Cl]2 (0.01–0.05 eq.) and the ligand dppf (1,1′-ferrocenediyl-bis(diphenylphosphine)ferrocene) in 1/1 molar ratio has proven to be a suitable catalytic system for the reduction of several and diverse aldehydes and ketones to their corresponding alcohols under mild conditions (40–60 °C) in air, showing from moderate to excellent tolerability towards different functional groups (halogen, cyano, nitro, phenol). The reduction of imine compounds to their corresponding amine derivatives was also studied. In addition, the comparison between the results obtained in TBABr/HCOOH and in organic solvents suggests a non-innocent effect of the DES medium during the process.
Galantamine-curcumin hybrids as dual-site binding acetylcholinesterase inhibitors
Atanasova, Mariyana,Atanasova, Teodora,Doytchinova, Irini,Ivanov, Stefan,Konstantinov, Spiro,Lukarski, Atanas,Philipova, Irena,Stavrakov, Georgi,Zheleva, Dimitrina,Zhivkova, Zvetanka D.
, (2020/08/06)
Galantamine (GAL) and curcumin (CU) are alkaloids used to improve symptomatically neurodegenerative conditions like Alzheimer's disease (AD). GAL acts mainly as an inhibitor of the enzyme acetylcholinesterase (AChE). CU binds to amyloid-beta (Aβ) oligomers and inhibits the formation of Aβ plaques. Here, we combine GAL core with CU fragments and design a combinatorial library of GAL-CU hybrids as dual-site binding AChE inhibitors. The designed hybrids are screened for optimal ADME properties and BBB permeability and docked on AChE. The 14 best performing compounds are synthesized and tested in vitro for neurotoxicity and anti-AChE activity. Five of them are less toxic than GAL and CU and show activities between 41 and 186 times higher than GAL.
New Zinc Catalyst for Hydrosilylation of Carbonyl Compounds
Alshakova, Iryna D.,Nikonov, Georgii I.
, p. 3305 - 3312 (2019/08/28)
A new zinc complex was synthesized and applied in the catalytic hydrosilylation of carbonyl compounds. Optimization of the reaction conditions showed that the presence a substoichiometric amount of methanol accelerates the process significantly. The reaction can proceed at very low catalyst load (down to 0.1 molpercent) under mild reaction conditions. The reaction tolerates the presence of C=C bonds, and thus can be useful for the synthesis of allylic alcohols from α,β-unsaturated aldehydes and ketones.
Polypyridyl iridium(III) based catalysts for highly chemoselective hydrogenation of aldehydes
Pandrala, Mallesh,Resendez, Angel,Malhotra, Sanjay V.
, p. 283 - 288 (2019/09/30)
Iridium-catalyzed transfer hydrogenation (TH) of carbonyl compounds using HCOOR (R = H, Na, NH4) as a hydrogen source is a pivotal process as it provides the clean process and is easy to execute. However, the existing highly efficient iridium catalysts work at a narrow pH; thus, does not apply to a wide variety of substrates. Therefore, the development of a new catalyst which works at a broad pH range is essential as it can gain a broader scope of utilization. Here we report highly efficient polypyridyl iridium(III) catalysts, [Ir(tpy)(L)Cl](PF6)2 {where tpy = 2,2′:6′,2′'-Terpyridine, L = phen (1,10-Phenanthroline), Me2phen (4,7-Dimethyl-1,10-phenanthroline), Me4phen (3,4,7,8-Tetramethyl-1,10-phenanthroline), Me2bpy (4,4′-Dimethyl-2–2′-dipyridyl)} for the chemoselective reduction of aldehydes to alcohols in aqueous ethanol and sodium formate as the hydride source. The reaction can be carried out efficiently in broad pH ranges, from pH 6 to 11. These catalysts are air stable, easy to prepare using commercially available starting materials, and are highly applicable for a wide range of substrates, such as electron-rich or deficient (hetero)arenes, halogens, phenols, alkoxy, ketones, esters, carboxylic acids, cyano, and nitro groups. Particularly, acid and hydroxy groups containing aldehydes were reduced successfully in basic and acidic reaction conditions, demonstrating the efficiency of the catalyst in a broad pH range with high conversion rates under microwave irradiation.
Cobalt-Catalyzed Hydroboration of Alkenes, Aldehydes, and Ketones
Tamang, Sem Raj,Bedi, Deepika,Shafiei-Haghighi, Sara,Smith, Cecilia R.,Crawford, Christian,Findlater, Michael
supporting information, p. 6695 - 6700 (2018/11/21)
An operationally convenient and general method for hydroboration of alkenes, aldehydes, and ketones employing Co(acac)3 as a precatalyst is reported. The hydroboration of alkenes in the presence of HBpin, PPh3, and NaOtBu affords good to excellent yields with high Markovnikov selectivity with up to 97:3 branched/linear selectivity. Moreover, Co(acac)3 could be used effectively to hydroborate aldehydes and ketones in the absence of additives under mild reaction conditions. Inter- and intramolecular chemoselective reduction of the aldehyde group took place over the ketone functional group.
Methanol as hydrogen source: Transfer hydrogenation of aromatic aldehydes with a rhodacycle
Aboo, Ahmed H.,Bennett, Elliot L.,Deeprose, Mark,Robertson, Craig M.,Iggo, Jonathan A.,Xiao, Jianliang
supporting information, p. 11805 - 11808 (2018/11/10)
A cyclometalated rhodium complex has been shown to perform highly selective and efficient reduction of aldehydes, deriving the hydrogen from methanol. With methanol as both the solvent and hydrogen donor under mild conditions and an open atmosphere, a wide range of aromatic aldehydes were reduced to the corresponding alcohols, without affecting other functional groups.
Mild and selective reduction of aldehydes utilising sodium dithionite under flow conditions
Neyt, Nicole C.,Riley, Darren L.
supporting information, p. 1529 - 1536 (2018/07/05)
We recently reported a novel hybrid batch-flow synthesis of the antipsychotic drug clozapine in which the reduction of a nitroaryl group is described under flow conditions using sodium dithionite. We now report the expansion of this method to include the reduction of aldehydes. The method developed affords yields which are comparable to those under batch conditions, has a reduced reaction time and improved space-time productivity. Furthermore, the approach allows the selective reduction of aldehydes in the presence of ketones and has been demonstrated as a continuous process.
Chemoselective continuous-flow hydrogenation of aldehydes catalyzed by platinum nanoparticles dispersed in an amphiphilic resin
Osako, Takao,Torii, Kaoru,Hirata, Shuichi,Uozumi, Yasuhiro
, p. 7371 - 7377 (2017/11/09)
A chemoselective continuous-flow hydrogenation of aldehydes catalyzed by a dispersion of platinum nanoparticles in an amphiphilic polymer (ARP-Pt) has been developed. Aromatic and aliphatic aldehydes bearing various reducible functional groups, such as keto, ester, or amide groups, readily underwent flow hydrogenation in aqueous solutions within 22 s in a continuous-flow system containing ARP-Pt to give the corresponding primary benzylic or aliphatic alcohols in ≤99% yield with excellent chemoselectivity. Moreover, the long-term continuous-flow hydrogenation of benzaldehyde for 8 days was realized, and the total turnover number of the catalyst reached 997. The flow hydrogenation system provides an efficient and practical method for the chemoselective hydrogenation of aldehydes bearing reducible functional groups.
Iron Catalyzed Hydroboration of Aldehydes and Ketones
Tamang, Sem Raj,Findlater, Michael
, p. 12857 - 12862 (2017/12/08)
We report an operationally convenient room temperature hydroboration of aldehydes and ketones employing Fe(acac)3 as precatalyst. The hydroboration of aldehydes and ketones proceeded efficiently at room temperature to yield, after work up, 1° and 2° alcohols; chemoselective hydroboration of aldehydes over ketones is attained under these conditions. We propose a σ-bond metathesis mechanism in which an Fe-H intermediate is postulated to be a key reactive species.
