Welcome to LookChem.com Sign In|Join Free

CAS

  • or

1314-24-5

Post Buying Request

1314-24-5 Suppliers

Recommended suppliersmore

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

1314-24-5 Usage

Chemical Properties

transparent crystal(s); monoclinic or colorless liquid; disproportionates to red P and P2O4if heated above 210°C [MER06]

General Description

White crystalline solid or a liquid (melting point 24°C). Density 2.14 g / cm3. Toxic and corrosive. May severely irritate skin and eyes. Used to make other chemicals.

Air & Water Reactions

Fumes in air. Reacts slowly with cold water to give phosphorous acid. Reacts vigorously with hot water to generate red phosphorus, phosphine (highly toxic and flammable) and phosphoric acid [Merck 11th ed. 1989].

Reactivity Profile

Phosphorus trioxide reacts exothermically with bases. Melted Phosphorus trioxide readily ignites in air. Instantly ignites with a flame of almost blinding brilliance when thrown into oxygen at 50-60°C [J. Am. Chem. Soc. 125:347. 1924]. Incompatible with ammonia, disulfur dichloride, halogens, oxygen, phosphorus pentachloride, sulfur, sulfuric acid, water [Bretherick, 5th ed., 1995, p. 1778].

Health Hazard

TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Reaction with water or moist air will release toxic, corrosive or flammable gases. Reaction with water may generate much heat that will increase the concentration of fumes in the air. Fire will produce irritating, corrosive and/or toxic gases. Runoff from fire control or dilution water may be corrosive and/or toxic and cause pollution.

Fire Hazard

Non-combustible, substance itself does not burn but may decompose upon heating to produce corrosive and/or toxic fumes. Vapors may accumulate in confined areas (basement, tanks, hopper/tank cars etc.). Substance will react with water (some violently), releasing corrosive and/or toxic gases and runoff. Contact with metals may evolve flammable hydrogen gas. Containers may explode when heated or if contaminated with water.

Check Digit Verification of cas no

The CAS Registry Mumber 1314-24-5 includes 7 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 4 digits, 1,3,1 and 4 respectively; the second part has 2 digits, 2 and 4 respectively.
Calculate Digit Verification of CAS Registry Number 1314-24:
(6*1)+(5*3)+(4*1)+(3*4)+(2*2)+(1*4)=45
45 % 10 = 5
So 1314-24-5 is a valid CAS Registry Number.
InChI:InChI=1/O3P2/c1-4-3-5-2

1314-24-5SDS

SAFETY DATA SHEETS

According to Globally Harmonized System of Classification and Labelling of Chemicals (GHS) - Sixth revised edition

Version: 1.0

Creation Date: Aug 13, 2017

Revision Date: Aug 13, 2017

1.Identification

1.1 GHS Product identifier

Product name Phosphorus trioxide

1.2 Other means of identification

Product number -
Other names phosphorous anhydride

1.3 Recommended use of the chemical and restrictions on use

Identified uses For industry use only.
Uses advised against no data available

1.4 Supplier's details

1.5 Emergency phone number

Emergency phone number -
Service hours Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

More Details:1314-24-5 SDS

1314-24-5Downstream Products

1314-24-5Relevant articles and documents

A simple and green approach for preparation of ZnO2 and ZnO under sunlight irradiation

Sun, Meng,Hao, Weichang,Wang, Chunzhong,Wang, Tianmin

, p. 342 - 346 (2008/09/20)

A green approach is developed for sol-gel synthesis of ZnO and ZnO2 through photochemical reaction under sunlight irradiation. The component and structure of the sol and powders are systematically analyzed, and the reaction equations are deduced and the fabrication mechanisms are discussed. It is found that the ZnO2 powder is obtained when sintering temperature is below 200 °C, while ZnO powder is obtained as sintering temperature increases from 200 to 800 °C. All ZnO and ZnO2 prepared by this method are with crystal structure and high purity. Our fabrication process has low energy consumption and it brings no environment pollution. This simple and green approach is considered of great potential applications in industry.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1

What can I do for you?
Get Best Price

Get Best Price for 1314-24-5