137454-00-3

Upstream product

• 67-64-1 acetone 
• 447463-65-2 1,2,4,5-tetrakis(tert-butylthio)benzene 

Relevant academic research and scientific papers

Synthesis, Characterization, and Nanoencapsulation of Tetrathiatriarylmethyl and Tetrachlorotriarylmethyl (Trityl) Radical Derivativesí-A Study to Advance Their Applicability as in Vivo EPR Oxygen Sensors

Tissue oxygenation plays an important role in the pathophysiology of various diseases and is often a marker of prognosis and therapeutic response. EPR (ESR) is a suitable noninvasive oximetry technique. However, to reliably deploy soluble EPR probes as oxygen sensors in complex biological systems, there is still a need to investigate and improve their specificity, sensitivity, and stability. We reproducibly synthesized various derivatives of tetrathiatriarylmethyl and tetrachlorotriarylmethyl (trityl) radicals. Hydrophilic radicals were investigated in aqueous solution mimicking physiological conditions by, e.g., variation of viscosity and ionic strength. Their specificity was satisfactory, but the oxygen sensitivity was low. To enhance the capability of trityl radicals as oxygen sensors, encapsulation into oily core nanocapsules was performed. Thus, different lipophilic triesters were prepared and characterized in oily solution employing oils typically used in drug formulations, i.e., middle-chain triglycerides and isopropyl myristate. Our screening identified the deuterated ethyl ester of D-TAM (radical 13) to be suitable. It had an extremely narrow single EPR line under anoxic conditions and excellent oxygen sensitivity. After encapsulation, it retained its oxygen responsiveness and was protected against reduction by ascorbic acid. These biocompatible and highly sensitive nanosensors offer great potential for future EPR oximetry applications in preclinical research.

Synthesis of Central Chirality-Containing Triarylmethanols and Triarylmethyl Radicals with Extraordinarily Stable Configurations

Triarylmethanol adopts a propeller-shaped conformation with either right-handed (P) or left-handed (M) configuration. Herein, new triarylmethanols with two chiral centers were obtained via introduction of two cis-hydroxyl groups on the side chains, affording four stereoisomers. These four stereoisomers were easily separated by silica gel column chromatography into two pairs of propeller-shaped enantiomers, as shown by NMR and X-ray crystallographic studies. High-performance liquid chromatography (HPLC) studies showed that the configurations of the hydroxyl-bearing triarylmethanols are much more stable than those of the bulky tert-butyldimethylsilyl-protected precursors, inconsistent with the general strategy in which the steric repulsion is largely responsible for the configurational stability. Similarly, two hydroxyl-bearing tetrathiatriarylmethyl (TAM) radicals also exhibit excellent configurational stability and are thus separable by CS-HPLC into four stereoisomers. Interestingly, both helical chirality from triaryl group (M or P) and central chirality (R and S) on the side chain have little effect on their electron paramagnetic resonance properties. Our present study provides a new strategy to construct configurationally stable triaryl compounds and demonstrates that the side chain on TAM radicals is a new site for their structural modifications.

General synthesis of persistent trityl radicals for EPR imaging of biological systems.

In this paper we describe the syntheses of the tetraoxygenated triarylmethyl (trityl) radical 14 and the tetrathiatriarylmethyl (trityl) radicals 15 and 16. The syntheses include new and improved preparations of the key intermediate compounds 1 and 2. The new route to compound 2 is noteworthy for its efficiency and its avoidance of the highly toxic compound phosgene as well as the isolation of the air-sensitive 1,2,4,5-benzenetetrathiol.

Reactivity of molecular oxygen with ethoxycarbonyl derivatives of tetrathiatriarylmethyl radicals

Tetrathiatriarylmethyl (TAM) radicals are commonly used as oximetry probes for electron paramagnetic resonance imaging applications. In this study, the electronic properties and the thermodynamic preferences for O2 addition to various TAM-type triarylmethyl (trityl) radicals were theoretically investigated. The radicals' stability in the presence of O2 and biological milieu was also experimentally assessed using EPR spectroscopy. Results show that H substitution on the aromatic ring affects the trityl radical's stability (tricarboxylate salt 1-CO2Na > triester 1-CO2Et > diester 2-CO2Et > monoester 3-CO 2Et) and may lead to substitution reactions in cellular systems. We propose that this degradation process involves an arylperoxyl radical that can further decompose to alcohol or quinone products. This study demonstrates how computational chemistry can be used as a tool to rationalize radical stability in the redox environment of biological systems and aid in the future design of more biostable trityl radicals.

Versatile Trityl Spin Labels for Nanometer Distance Measurements on Biomolecules In Vitro and within Cells

Structure determination of biomacromolecules under in-cell conditions is a relevant yet challenging task. Electron paramagnetic resonance (EPR) distance measurements in combination with site-directed spin labeling (SDSL) are a valuable tool in this endeavor but the usually used nitroxide spin labels are not well-suited for in-cell measurements. In contrast, triarylmethyl (trityl) radicals are highly persistent, exhibit a long relaxation time and a narrow spectral width. Here, the synthesis of a versatile collection of trityl spin labels and their application in in vitro and in-cell trityl–iron distance measurements on a cytochrome P450 protein are described. The trityl labels show similar labeling efficiencies and better signal-to-noise ratios (SNR) as compared to the popular methanethiosulfonate spin label (MTSSL) and enabled a successful in-cell measurement.

Large-scale synthesis of a persistent trityl radical for use in biomedical EPR applications and imaging

Tetrathiatriarylmethyl radicals are ideal spin probes for biological electron paramagnetic resonance (EPR) spectroscopy and imaging. The wide application of trityl radicals as biosensors of oxygen or other biological radicals was hampered by the lack of affordable large-scale syntheses. We report the large-scale synthesis of the Finland trityl radical using an improved addition protocol of the aryl lithium monomer to methylchloroformate. A new reaction for the formal one-electron reduction of trityl alcohols to trityl radicals using neat trifluoroacetic acid is reported as well. Initial applications show that the compound is very sensitive to molecular oxygen. It has already provided high-resolution EPR images on large aqueous samples and should be suitable for a broad range of in vivo applications.

Fluorescent Dyes with Large Stokes Shifts Based on Benzo[1,2-d:4,5-d']bis([1,3]dithiole) (“S4-DBD Dyes”)

We report on a further development of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes by replacement of the four oxygen atoms of the heterocyclic core by sulfur atoms. This variation causes striking changes of the photophysical properties. Whereas absorption and emission significantly shifted to longer wavelength, the fluorescence lifetimes and quantum yields are diminished compared to DBD dyes. The latter effect is presumably caused by an enhanced intersystem crossing to the triplet state due to the sulfur atoms. The very large Stokes shifts of the S4-DBD dyes ranging from 3000 cm–1 to 7400 cm–1 (67 nm to 191 nm) should be especially emphasized. By analogy with DBD dyes a broad variation of absorption and emission wavelength is possible by introducing different electron withdrawing substituents. Moreover, some derivatives for coupling with biomolecules were developed.

Improved, odorless access to Benzo[1,2-d;4,5-d′]-bis[1,3]dithioles and tert-butyl arylsulfides via C-S cross coupling

Benzo[1,2-d;4,5-d′]bis[1,3]dithioles are important building blocks within a range of functional materials such as fluorescent dyes, conjugated polymers, and stable trityl radicals. Access to these is usually gained via tert-butyl aryl sulfides, the synthesis of which requires the use of highly malodorous tert-butyl thiol and relies on SNAr-chemistry requiring harsh reaction conditions, while giving low yields. In the present work, S-tert-butyl isothiouronium bromide is successfully applied as an odorless surrogate for tert-butyl thiol. The C-S bond formation is carried out under palladium catalysis with the thiolate formed in situ resulting in high yields of tert-butyl aryl sulfides. The subsequent formation of benzo[1,2-d;4,5-d′]bis[1,3]dithioles is here achieved with scandium(III)triflate, a less harmful reagent than the usually used Lewis acids, e.g., boron trifluoride or tetrafluoroboric acid. This enables a convenient and environmentally more compliant access to high yields of benzo[1,2-d;4,5-d′]bis[1,3]dithioles.

Trityl Radicals with a Combination of the Orthogonal Functional Groups Ethyne and Carboxyl: Synthesis without a Statistical Step and EPR Characterization

Finland trityl radical (FTR) shows very attractive EPR spectroscopic properties for a manifold of applications. For most of its applications only one chemically reactive functional group is needed. The presence of three equally reactive carboxyl groups leads to FTR modifications through reactions which give statistical mixtures of 1-fold-, 2-fold-, and 3-fold-modified and unmodified FTR. To avoid the side effects of such a statistical reaction - limited yields and separation challenges - we took a route to FTR-type trityl radicals with scaffold assembly by addition of an aryllithium with one type of substituent to a diarylketone with another type of substituent. This gave the two FTR-type trityl radicals 1 and 2 which carry a combination of the chemically orthogonal groups, carboxyl and triisopropylsilylethynyl. Standard column chromatography was sufficient for product isolation on all stages, whereby polar tagging helped. The EPR spectroscopic properties of the trityl radicals 1 and 2 in ethanol were determined in X and W bands. Their g anisotropy and T1 and T2 relaxation times make them spin labels as good as the benchmark FTR. This paper discloses also details on the synthesis of building blocks used for FTR preparation and improved access to the bare FTR scaffold.

Bi-radical compound composed of triaryl methyl radical and nitroxide radical and salt thereof and preparation method and application of bi-radical compound composed of triaryl methyl radical and nitroxide radical and salt thereof

The invention provides a bi-radical compound composed of a triaryl methyl radical and a nitroxide radical and salt thereof and a preparation method and application of the bi-radical compound composedof the triaryl methyl radical and the nitroxide radical and the salt thereof. A structural formula of the bi-radical compound is as shown in the formula 1; the formula is shown in the description; thepreparation method comprises the steps that a compound A1 and a compound A2 are subjected to acid amide condensation reaction to obtain a compound A3; the compound A3 and a compound A4 are subjectedto acid amide condensation reaction to obtain the bi-radical compound and the salt thereof. The portion, provided with both the nitroxide radical and the triaryl methyl radical, of a bi-radical polarization agent has the following advantages that the frequency matching ability is better, and the CE efficiency is higher; under a magic angle spinning condition, a depolarization effect does not exist, and a high field DNP enhancing effect is better; exchange interaction is stronger; the water solubility is good, so that the DNP enhancing multiple is high; by modifying R1, R2, R3, R4, R5 and R6 groups, exchange interaction can be improved moderately, bi-radical relaxation time can be prolonged moderately, and the bi-radical water solubility can be improved moderately, so that the DNP propertyof the polarization agent is improved.