14260-98-1

Basic information

• Product Name: 2-butoxyethyl dihydrogenphosphate
• Synonyms: 2-butoxyethyl dihydrogenphosphate;2-butoxy-ethano dihydrogen phosphate;Butyl cellosolve phosphate;Ethanol, 2-butoxy-, dihydrogen phosphate;Phosphoric acid 2-butoxyethyl ester;Phosphoric acid dihydrogen 2-butoxyethyl ester;Einecs 238-141-7;Ethanol, 2-butoxy-, 1-(dihydrogen phosphate)
• CAS NO: 14260-98-1
• Molecular Formula: C6H15O5P
• Molecular Weight: 198.154061
• EINECS: 238-141-7
• Mol File: 14260-98-1.mol
• Article Data: 1

Chemical Properties

• Boiling Point: 324.8°Cat760mmHg
• Flash Point: 150.2°C
• Appearance: /
• Density: 1.242g/cm³
• Vapor Pressure: 4.87E-05mmHg at 25°C
• Refractive Index: 1.455
• PKA: 1.85±0.10(Predicted)
• CAS DataBase Reference: 2-butoxyethyl dihydrogenphosphate(CAS DataBase Reference)
• NIST Chemistry Reference: 2-butoxyethyl dihydrogenphosphate(14260-98-1)
• EPA Substance Registry System: 2-butoxyethyl dihydrogenphosphate(14260-98-1)

Safety Data

• Hazardous Substances Data: 14260-98-1(Hazardous Substances Data)

Usage

Uses

2-Butoxyethyl Phosphate is a pollutant found in organic wastewater.

InChI:InChI=1/C6H15O5P/c1-2-3-4-10-5-6-11-12(7,8)9/h2-6H2,1H3,(H2,7,8,9)

Upstream product

• 111-76-2 2-Butoxyethanol 

Relevant articles and documents

PHOSPHORUS-BASED RELEASING AGENT, OPTICAL POLYMERIZABLE COMPOSITION COMPRISING SAME AND PREPARATION THEREOF

Embodiments relate to a polymerizable composition comprising a phosphorus-based mold releasing agent for an optical use whose preparation process is improved, and a process for preparing the phosphorus-based mold releasing agent. The phosphorus-based mold releasing agents can be prepared more easily and conveniently by using phosphorous pentoxide, which can easily react with a monoalcohol and/or water at room temperature in the absence of a catalyst or a solvent. In addition, byproducts are not generated during the reaction. Thus, when a lens is produced by using the mold release agent obtained therefrom, it is possible to prevent a defective appearance of the lens that may be caused by byproducts, thereby further enhancing the appearance properties thereof. Further, since separate steps for removing byproducts, specifically, such steps as washing and filtration, are not required, wastewater is not generated. Thus, it is not only environmentally friendly, but the production cost can also be reduced as the process is simple.