144865-46-3

Upstream product

• 78-96-6 3-amino-2-propanol 
• 920-46-7 Methacryloyl chloride 
• 675589-71-6 (S)-2-Hydroxy-propionic acid (S)-1-[1-methyl-2-(2-methyl-acryloylamino)-ethoxycarbonyl]-ethyl ester 
• 897017-30-0 (S)-2-Hydroxy-propionic acid 1-methyl-2-(2-methyl-acryloylamino)-ethyl ester 
• 760-93-0 methacryloyl anhydride 

Downstream Products

• 1450754-13-8 (Z)-N-[3-(2-hydroxypropylamino)-2-methyl-3-oxoprop-1-enyl]-4-nitrobenzamide 
• 288-32-4 1H-imidazole 
• 1434118-32-7 N-(2-benzoyloxypropyl)methacrylamide 

Relevant academic research and scientific papers

Polymer Side-Chain Degradation as a Tool to Control the Destabilization of Polyplexes

Purpose. We purposed to design a cationic polymer that binds to pDNA to form polyplexes and that subsequently degrades within a few days at physiological pH and temperature, releasing the DNA in the cytosol of a cell. Methods. We synthesized a new monomer carbonic acid 2-dimethylamino-ethyl ester 1-methyl-2-(2-methacryloylamino)-ethyl ester (abbreviated HPMA-DMAE) and the corresponding polymer. Hydrolysis of the carbonate ester of both the monomer and the polymer was investigated at 37°C. The DNA condensing properties of the pHPMA-DMAE was studied using dynamic light scattering (DLS) and zeta potential measurements. Degradation of the polyplexes at 37°C and pH 7.4 was monitored with DLS and gel electrophoresis. In vitro transfections were performed in COS-7 cell line. Results. pHPMA-DMAE is able to condense DNA into small particles (110 nm) with a positive zeta potential. The half-life of the polymer and monomer at 37°C and pH 7.4 was around 10 h whereas at pH 5, the half-life was 380 h. In line with this, due to hydrolysis of the side groups, pHPMA-DMAE-based polyplexes dramatically increased in size at 37°C and pH 7.4 whereas at pH 5.0, only a very small increase was observed. Interestingly, intact DNA was released from the polyplexes after 48 h at pH 7.4 whereas all DNA remained bound to the polymer at pH 5.0. Polyplexes were able to transfect cells with minimal cytotoxicity if the endosomal membrane-disrupting peptide INF-7 was added to the polyplex formulation. Conclusions. Degradation of the cationic side-chains of a polymer is a new tool for time-controlled release of DNA from polyplexes, preferably within the cytosol and/or nucleus.

HPMA-PLGA Based Nanoparticles for Effective In Vitro Delivery of Rifampicin

Purpose: Tuberculosis (TB) chemotherapy witnesses some major challenges such as poor water-solubility and bioavailability of drugs that frequently delay the treatment. In the present study, an attempt to enhance the aqueous solubility of rifampicin (RMP) was made via co-polymeric nanoparticles approach. HPMA (N-2-hydroxypropylmethacrylamide)-PLGA based polymeric nanoparticulate system were prepared and evaluated against Mycobacterium tuberculosis (MTB) for sustained release and bioavailability of RMP to achieve better delivery. Methodology: HPMA-PLGA nanoparticles (HP-NPs) were prepared by modified nanoprecipitation technique, RMP was loaded in the prepared NPs. Characterization for particle size, zeta potential, and drug-loading capacity was performed. Release was studied using membrane dialysis method. Results: The average particles size, zeta potential, polydispersity index of RMP loaded HPMA-PLGA-NPs (HPR-NPs) were 260.3 ± 2.21?nm, ?6.63 ± 1.28?mV, and 0.303 ± 0.22, respectively. TEM images showed spherical shaped NPs with uniform distribution without any cluster formation. Entrapment efficiency and drug loading efficiency of HPR-NPs were found to be 76.25 ± 1.28%, and 26.19 ± 2.24%, respectively. Kinetic models of drug release including Higuchi and Korsmeyer-peppas demonstrated sustained release pattern. Interaction studies with human RBCs confirmed that RMP loaded HP-NPs are less toxic in this model than pure RMP with (p 0.05). Conclusions: The pathogen inhibition studies revealed that developed HPR-NPs were approximately four times more effective with (p 0.05) than pure drug against sensitive Mycobacterium tuberculosis (MTB) stain. It may be concluded that HPR-NPs holds promising potential for increasing solubility and bioavailability of RMP.

Polyvalent Diazonium Polymers Provide Efficient Protection of Oncolytic Adenovirus Enadenotucirev from Neutralizing Antibodies while Maintaining Biological Activity in Vitro and in Vivo

Oncolytic viruses offer many advantages for cancer therapy when administered directly to confined solid tumors. However, the systemic delivery of these viruses is problematic because of the host immune response, undesired interactions with blood components, and inherent targeting to the liver. Efficacy of systemically administered viruses has been improved by masking viral surface proteins with polymeric materials resulting in modulation of viral pharmacokinetic profile and accumulation in tumors in vivo. Here we describe a new class of polyvalent reactive polymer based on poly(N-(2-hydroxypropyl)methacrylamide) (polyHPMA) with diazonium reactive groups and their application in the modification of the chimeric group B oncolytic virus enadenotucirev (EnAd). A series of six copolymers with different chain lengths and density of reactive groups was synthesized and used to coat EnAd. Polymer coating was found to be extremely efficient with concentrations as low as 1 mg/mL resulting in complete (>99%) ablation of neutralizing antibody binding. Coating efficiency was found to be dependent on both chain length and reactive group density. Coated viruses were found to have reduced transfection activity both in vitro and in vivo, with greater protection against neutralizing antibodies resulting in lower transgene production. However, in the presence of neutralizing antibodies, some in vivo transgene expression was maintained for coated virus compared to the uncoated control. The decrease in transgene expression was found not to be solely due to lower cellular uptake but due to reduced unpackaging of the virus within the cells and reduced replication, indicating that the polymer coating does not cause permanent inactivation of the virus. These data suggest that virus activity may be modulated by the appropriate design of coating polymers while retaining protection against neutralizing antibodies.

ENZYMATICALLY CATALYZED GENERATION OF ELECTRONICALLY EXCITED STATES IN A SYNTHETIC COPOLYMER WITH A SCHIFF BASE IN PENDANT GROUPS

The copolymer of N-(2-hydroxypropyl)methacrylamide and N-hexane-1,6-diamime (17.6 mole percent) was prepared as a model compound for investigation of a mechanism of enzymatically catalyzed generation of electronically excited states in proteins.The amino end groups of the copolymer side chains were transformed into a Schiff base by reaction with glycolaldehyde.The modified copolymer was characterized by its ultraviolet, visible and fluorescence spectra.The enzymatically catalyzed oxidation of the modified copolymer was carried out in a phosphate buffer at pH 7 using horseradish peroxidase as the enzyme.The generation of electronically excited states was demonstrated by chemiluminiscence measurement and by spectroscopic procedure based on transfer of the excitation energy to bilirubin.

Indium-based and iodine-based labeling of HPMA copolymer-epirubicin conjugates: Impact of structure on the in vivo fate

Recently, we developed 2nd generation backbone degradable N-(2-hydroxypropyl)methacrylamide (HPMA) copolymer-drug conjugates which contain enzymatically cleavable sequences (GFLG) in both polymeric backbone and side-chains. This design allows using polymeric carriers with molecular weights above renal threshold without impairing their biocompatibility, thereby leading to significant improvement in therapeutic efficacy. For example, 2nd generation HPMA copolymer-epirubicin (EPI) conjugates (2P-EPI) demonstrated complete tumor regression in the treatment of mice bearing ovarian carcinoma. To obtain a better understanding of the in vivo fate of this system, we developed a dual-labeling strategy to simultaneously investigate the pharmacokinetics and biodistribution of the polymer carrier and drug EPI. First, we synthesized two different types of dual-radiolabeled conjugates, including 1) 111In-2P-EPI-125I (polymeric carrier 2P was radiolabeled with 111In and drug EPI with 125I), and 2) 125I-2P-EPI-111In (polymeric carrier 2P was radiolabeled with 125I and drug EPI with 111In). Then, we compared the pharmacokinetics and biodistribution of these two dual-labeled conjugates in female nude mice bearing A2780 human ovarian carcinoma. There was no significant difference in the blood circulation between polymeric carrier and payload; the carriers (111In-2P and 125I-2P) showed similar retention of radioactivity in both tumor and major organs except kidney. However, compared to 111In-labeled payload EPI, 125I-labeled EPI showed lower radioactivity in normal organs and tumor at 48 h and 144 h after intravenous administration of conjugates. This may be due to different drug release rates resulting from steric hindrance to the formation of enzyme-substrate complex as indicated by cleavage experiments with lysosomal enzymes (Tritosomes). A slower release rate of EPI(DTPA)111In than EPI(Tyr)125I was observed. It may be also due to in vivo catabolism and subsequent iodine loss as literature reported. Nevertheless, tumor-to-tissue uptake ratios of both radionuclides were comparable, indicating that drug-labeling strategy does not affect the tumor targeting ability of HPMA copolymer conjugates.

Removable nanocoatings for siRNA polyplexes

To assist in overcoming the in-herent instability of nucleic acid-containing polyplexes in physiological solutions, we have here set out to develop removable nanocoatings for modifying the surface of siRNA-based nanoparticles. Here, N-(2-hydroxypropyl)methacrylamide (HPMA) based copolymers containing carbonylthiazolidine-2-thione (TT) reactive groups in their side chains bound via disulfide spacers to the polymeric backbone were synthesized, and these copolymers were used to coat the surface of polyplexes formed by the self-assembly of anti-Luciferase siRNA with the polycations polyethylene imine (PEI) and poly(HPMA)-grafted poly(l-lysine) (GPL). The coating process was monitored by analyzing changes in the weight-average molecular weight (M w), the hydrodynamic radius (Rh), and the zeta-potential (ζ) of the polyplexes, using both static (SLS) and dynamic (DLS) light scattering methods. The outlined methods resulted in the attachment of, on average, 28 polymer molecules to the surface of the polyplexes, forming a ～5-nm-thick hydrophilic stealth coating. Initial efforts to develop RGD-targeted coated polyplexes are also described. Atomic force microscopy (AFM) showed an angular polyplex structure and confirmed the narrow size distribution of the coated nanoparticles. The stability of the polymer-coated and uncoated polyplexes was evaluated by gel electrophoresis and by turbidity measurements, and it was found that modifying the surface of the siRNA-containing polyplexes substantially improved their stability in physiological solutions. Using polymer-coated GPL-based polyplexes containing anti-Luciferase siRNA, we finally also obtained some initial proof-of-principle for time- and concentration-dependent target-specific gene silencing, suggesting that these systems hold significant potential for further in vitro and in vivo evaluation.

HPMA copolymer-doxorubicin conjugates: The effects of molecular weight and architecture on biodistribution and in vivo activity

The molecular weight and molecular architecture of soluble polymer drug carriers significantly influence the biodistribution and anti-tumour activities of their doxorubicin (DOX) conjugates in tumour-bearing mice. Biodistribution of N-(2-hydroxypropyl)methacrylamide (HPMA) copolymer-DOX conjugates of linear and star architectures were compared in EL4 T-cell lymphoma-bearing mice. Biodistribution, including tumour accumulation, and anti-tumour activity of the conjugates strongly depended on conjugate molecular weight (MW), polydispersity, hydrodynamic radius (Rh) and molecular architecture. With increasing MW, renal clearance decreased, and the conjugates displayed extended blood circulation and enhanced tumour accumulation. The linear conjugates with flexible polymer chains were eliminated by kidney clearance more quickly than the highly branched star conjugates with comparable MWs. Interestingly, the data suggested different mechanisms of renal filtration for star and linear conjugates. Only star conjugates with MWs below 50,000 g.mo -1 were removed by kidney filtration, while linear polymer conjugates with MWs near 70,000 g.mol- 1, exceeding the generally accepted limit for renal elimination, were detected in the urine 36-96 h after injection. Additionally, survival of tumour-bearing mice was strongly dependent on molecular weight and polymer conjugate architecture. Treatment of mice with the lower MW conjugate at a dose of 10 mg DOX eq./kg resulted in 12% long-term surviving animals, while treatment with the corresponding star conjugate enabled 75% survival of animals.

Role of Polymer Architecture on the Activity of Polymer-Protein Conjugates for the Treatment of Accelerated Bone Loss Disorders

Polymers of similar molecular weights and chemical constitution but varying in their macromolecular architectures were conjugated to osteoprotegerin (OPG) to determine the effect of polymer topology on protein activity in vitro and in vivo. OPG is a protein that inhibits bone resorption by preventing the formation of mature osteoclasts from the osteoclast precursor cell. Accelerated bone loss disorders, such as osteoporosis, rheumatoid arthritis, and metastatic bone disease, occur as a result of increased osteoclastogenesis, leading to the severe weakening of the bone. OPG has shown promise as a treatment in bone disorders; however, it is rapidly cleared from circulation through rapid liver uptake, and frequent, high doses of the protein are necessary to achieve a therapeutic benefit. We aimed to improve the effectiveness of OPG by creating OPG-polymer bioconjugates, employing reversible addition-fragmentation chain transfer polymerization to create well-defined polymers with branching densities varying from linear, loosely branched to densely branched. Polymers with each of these architectures were conjugated to OPG using a "grafting-to" approach, and the bioconjugates were characterized by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The OPG-polymer bioconjugates showed retention of activity in vitro against osteoclasts, and each bioconjugate was shown to be nontoxic. Preliminary in vivo studies further supported the nontoxic characteristics of the bioconjugates, and measurement of the bone mineral density in rats 7 days post-treatment via peripheral quantitative computed tomography suggested a slight increase in bone mineral density after administration of the loosely branched OPG-polymer bioconjugate. (Chemical Equation Presented).

Polymer Cancerostatics Targeted by Recombinant Antibody Fragments to GD2-Positive Tumor Cells

A water-soluble polymer cancerostatic actively targeted against cancer cells expressing a disialoganglioside antigen GD2 was designed, synthesized and characterized. A polymer conjugate of an antitumor drug doxorubicin with a N-(2-hydroxypropyl)methacrylamide-based copolymer was specifically targeted against GD2 antigen-positive tumor cells using a recombinant single chain fragment (scFv) of an anti-GD2 monoclonal antibody. The targeting protein ligand was attached to the polymer-drug conjugate either via a covalent bond between the amino groups of the protein using a traditional nonspecific aminolytic reaction with a reactive polymer precursor or via a noncovalent but highly specific interaction between bungarotoxin covalently linked to the polymer and the recombinant scFv modified with a C-terminal bungarotoxin-binding peptide. The GD2 antigen binding activity and GD2-specific cytotoxicity of the targeted noncovalent polymer-scFv complex proved to be superior to the covalent polymer-scFv conjugate.

Thermoresponsive Polymer Micelles as Potential Nanosized Cancerostatics

An effective chemotherapy for neoplastic diseases requires the use of drugs that can reach the site of action at a therapeutically efficacious concentration and maintain it at a constant level over a sufficient period of time with minimal side effects. Currently, conjugates of high-molecular-weight hydrophilic polymers or biocompatible nanoparticles with stimuli-releasable anticancer drugs are considered to be some of the most promising systems capable of fulfilling these criteria. In this work, conjugates of thermoresponsive diblock copolymers with the covalently bound cancerostatic drug pirarubicin (PIR) were synthesized as a reversible micelle-forming drug delivery system combining the benefits of the above-mentioned carriers. The diblock copolymer carriers were composed of hydrophilic poly[N-(2-hydroxypropyl)methacrylamide]-based block containing a small amount (～5 mol %) of comonomer units with reactive hydrazide groups and a thermoresponsive poly[2-(2-methoxyethoxy)ethyl methacrylate] block. PIR was attached to the hydrophilic block of the copolymer through the pH-sensitive hydrazone bond designed to be stable in the bloodstream at pH 7.4 but to be degraded in an intratumoral/intracellular environment at pH 5-6. The temperature-induced conformation change of the thermoresponsive block (coil-globule transition), followed by self-assembly of the copolymer into a micellar structure, was controlled by the thermoresponsive block length and PIR content. The cytotoxicity and intracellular transport of the conjugates as well as the release of PIR from the conjugates inside the cells, followed by its accumulation in the cell nuclei, were evaluated in vitro using human colon adenocarcinoma (DLD-1) cell lines. It was demonstrated that the studied conjugates have a great potential to become efficacious in vivo pharmaceuticals. (Figure Presented).