145126-91-6

Upstream product

• 455-19-6 4-Trifluoromethylbenzaldehyde 
• 3300-51-4 p-Trifluoromethylbenzylamine 
• 1891-90-3 p-trifluoromethylbenzamide 
• 329-15-7 4-trifluoromethyl-phenyl acetyl chloride 
• 189245-79-2 p-trifluoromethyl-N-[p-(trifluoromethyl)benzylidene]benzylamine 

Downstream Products

• 145126-75-6 1-butyl-2-(ethoxycarbonyl)-N,N-bisaziridine-2-carboxamide 
• 189245-79-2 p-trifluoromethyl-N-[p-(trifluoromethyl)benzylidene]benzylamine 

Relevant academic research and scientific papers

Heterogeneously catalyzed self-condensation of primary amines to secondary amines by supported copper catalysts

Self-condensation of primary amines to symmetrically substituted secondary amines could efficiently be promoted by an inexpensive supported copper catalyst, Cu/Al2O3, easily prepared by the reduction of the hydroxide precursor, Cu(OH)x/Al2O3. Various kinds of structurally diverse primary amines including benzylamine, picolylamine, and aliphatic amine derivatives could selectively be converted into the corresponding secondary amines in moderate to excellent yields without any cocatalysts such as bases and stabilizing ligands in 1 atm of Ar or H 2. The reactions in H2 showed higher selectivities to desired secondary amines than those in Ar. The roles of H2 are the promotion of hydrogenation of N-alkylimines and the stabilization of active Cu(0) species. In addition, in the presence of Cu/Al2O3, unsymmetrically substituted secondary amines could efficiently be synthesized by N-alkylation of primary amines with alcohols and reductive amination of aldehydes. The observed catalysis was truly heterogeneous, and the retrieved Cu/Al2O3 catalyst could be reused for self-condensation without a significant loss of its catalytic performance. The reaction mechanism involving dehydrogenation of primary amines and condensation to N-alkylimines followed by hydrogenation, the so-called "borrowing hydrogen pathway", has been proposed. The Royal Society of Chemistry 2013.

Calix[6]arene-based atropoisomeric pseudo[2]rotaxanes

Some examples of atropoisomeric pseudorotaxanes in which the isomerism arises by the different conformations adopted by the wheel are reported here. Upon threading hexahexyloxycalix[6]arene 1 with ammonium axles 2+ or 3+, bearing biphenyl or trifluoro-methylbenzyl moieties, respectively, two atropoisomeric pseudorotaxanes were formed in which the calix[6]-wheel 1 adopts the 1,2,3-alternate and cone conformations. The interconversion between them cannot be obtained by simple rotation around the ArCH2Ar bonds of the calixarene wheel, which is blocked by the presence of the axle inside its cavity. Therefore, it can only be obtained through a mechanism of de-threading/re-threading of the axle. In all the examined cases, the 1,2,3-alternate and cone atropoisomers are, respectively, the kinetic and the thermodynamic ones.

Hydrosilylative reduction of primary amides to primary amines catalyzed by a terminal [Ni-OH] complex

A terminal [Ni-OH] complex1, supported by triflamide-functionalized NHC ligands, catalyzes the hydrosilylative reduction of a range of primary amides into primary amines in good to excellent yields under base-free conditions with key functional group tolerance. Catalyst1is also effective for the reduction of a variety of tertiary and secondary amides. In contrast to literature reports, the reactivity of1towards amide reduction follows an inverse trend,i.e., 1° amide > 3° amide > 2° amide. The reaction does not follow a usual dehydration pathway.

Pd/TiO2-Photocatalyzed Self-Condensation of Primary Amines to Afford Secondary Amines at Ambient Temperature

Symmetric secondary amines were synthesized by the self-condensation of primary amines over a palladium-loaded titanium dioxide (Pd/TiO2) photocatalyst. The reactions afforded a series of secondary amines in moderate to excellent isolated yields at ambient temperature (30 °C, in cyclopentyl methyl ether). Applicability for one-pot pharmaceutical synthesis was demonstrated by a photocatalytic reaction sequence of self-condensation of an amine followed by N-alkylation of the resulting secondary amine with an alcohol.

Cobalt complex, preparation method thereof, and application thereof in selective catalysis of transfer hydrogenation reaction of cyano group

The invention discloses a cobalt complex, a preparation method thereof, and an application thereof in the selective catalysis of a transfer hydrogenation reaction of a cyano group. The structural formula of the cobalt complex is represented by formula I. The cobalt complex is prepared through a reaction of a cobalt salt and an NNP ligand or a PNP ligand under the protection of an inert atmosphere;and the chemical formula of the cobalt salt is CoX12, wherein X1 represents halogen, a sulfate radical, a perchlorate radical, a hexafluorophosphate radical, a hexafluoroantimonate radical, a tetrafluoroborate radical, a trifluoromethanesulfonate radical or a tetra(pentafluorophenyl)borate radical. The cobalt complex can be used in the selective catalysis of the transfer hydrogenation reaction ofthe cyano group to obtain a primary amine compound, a secondary amine compound and a tertiary amine compound, the primary amine compound, the secondary amine compound and the tertiary amine compoundare important intermediates in a series of subsequent functionalizing reactions, and the cobalt complex has a very high catalysis activity, and has great research values and a great application prospect.

Synthesis of Symmetric and Unsymmetric Secondary Amines from the Ligand-Promoted Ruthenium-Catalyzed Deaminative Coupling Reaction of Primary Amines

The catalytic system generated in situ from the tetranuclear Ru-H complex with a catechol ligand (1/L1) was found to be effective for the direct deaminative coupling of two primary amines to form secondary amines. The catalyst 1/L1 was highly chemoselective for promoting the coupling of two different primary amines to afford unsymmetric secondary amines. The analogous coupling of aniline with primary amines formed aryl-substituted secondary amines. The treatment of aniline-d7 with 4-methoxybenzylamine led to the coupling product with significant deuterium incorporation on CH2 (18% D). The most pronounced carbon isotope effect was observed on the α-carbon of the product isolated from the coupling reaction of 4-methoxybenzylamine (C(1) = 1.015(2)). A Hammett plot was constructed from measuring the rates of the coupling reaction of 4-methoxyaniline with a series of para-substituted benzylamines 4-X-C6H4CH2NH2 (X = OMe, Me, H, F, CF3) (ρ = -0.79 ± 0.1). A plausible mechanistic scheme has been proposed for the coupling reaction on the basis of these results. The catalytic coupling method provides an operationally simple and chemoselective synthesis of secondary amine products without using any reactive reagents or forming wasteful byproducts.

Palladium nanoparticles stabilised by cinchona-based alkaloids in glycerol: Efficient catalysts for surface assisted processes

Palladium nanoparticles (PdNPs) were synthesised and fully characterised, both in solution and the solid state, using naturally-occurring cinchona-based alkaloids in neat glycerol. These nano-systems were stable under reaction conditions, finding applications in hydrogenation and hydrodehalogenation processes, as a result of their surface-like behaviour. Their reactivity was improved in relation to that involving PdNPs stabilised by phosphines and also by Pd/C as a heterogenous catalyst, mainly in terms of recyclability. In particular, the colloidal palladium catalyst stabilised by quinidine was highly efficient to promote the hydrodechlorination of aromatic compounds under low dihydrogen pressure. These original catalysts found applications in the synthesis of secondary and tertiary amines including N-substituted anilines, by means of one-pot tandem Pd-catalysed methodologies under smooth conditions. In all of these processes, glycerol performed a crucial function as a liquid support for the immobilisation of nanoparticle-based catalysts, allowing both the stabilisation of the nano-catalysts and easy recycling of the catalytic phase.

C70 as a Photocatalyst for Oxidation of Secondary Benzylamines to Imines

Photosensitive C70 was used for the catalytic oxidation of benzylamines to the corresponding imines. The advantages of using C70 compared to C60 or other commonly used photosensitizers such as tetraphenylporphyrin (TPP) ar

Tandem catalysis of amines using porous graphene oxide

Porous graphene oxide can be used as a metal-free catalyst in the presence of air for oxidative coupling of primary amines. Herein, we explore a GO-catalyzed carbon-carbon or/and carbon-heteroatom bond formation strategy to functionalize primary amines in tandem to produce a series of valuable products, i.e., α-aminophosphonates, α-aminonitriles, and polycyclic heterocompounds. Furthermore, when decorated with nano-Pd, the Pd-coated porous graphene oxide can be used as a bifunctional catalyst for tandem oxidation and hydrogenation reactions in the N-alkylation of primary amines, achieving good to excellent yields under mild conditions.

Discovery of a metalloenzyme-like cooperative catalytic system of metal nanoclusters and catechol derivatives for the aerobic oxidation of amines

We have discovered a new class of cooperative catalytic system, consisting of heterogeneous polymer-immobilized bimetallic Pt/Ir alloyed nanoclusters (NCs) and 4-tert-butylcatechol, for the aerobic oxidation of amines to imines under ambient conditions. After optimization, the desired imines were obtained in good to excellent yields with broad substrate scope. The reaction rate was determined to be first-order with respect to the substrate and catechol and zero-order for the alloyed Pt/Ir NC catalyst. Control studies revealed that both the heterogeneous NC catalyst and 4-tert-butylcatechol are essential and act cooperatively to facilitate the aerobic oxidation under mild conditions.