17243-38-8 Usage
Originator
Nalpen,Beecham,W. Germany,1972
Manufacturing Process
Example 1: α-Azidobenzylpenicillin via the Mixed Anhydride - A solution of α-
azidophenylacetic acid (8.9 grams, 0.05 mol) of triethylamine (5.1 grams,
0.05 mol) in 50 ml of dry dimethylformamide was stirred and chilled below -
5°C. At this temperature ethyl chloroformate (4.7 ml) was added in portions
so that the temperature was never above -5°C. After the mixture had been
stirred for 20 minutes, dry acetone (100 ml), chilled to -5°C, was added in
one portion, immediately followed by an ice-cold solution of 6-
aminopenicillanic acid (10.8 grams, 0.05 mol) and triethylamine (5.1 grams,
0.05 mol) in 100 ml of water, and the stirring was continued for 1? hours at
0°C.
The pH of the mixture was adjusted to 7.5 by adding a saturated sodium
bicarbonate solution. After being washed twice with diethyl ether, the reaction
solution was acidified to pH 2 with dilute hydrochloric acid and extracted with
ether. The ether solution containing the free penicillin was washed twice with
water and then extracted with 50 ml of N potassium bicarbonate solution.
After freeze drying of the obtained neutral solution, the potassium salt of α-
azidobenzylpenicillin was obtained as a slightly colored powder (11.2 grams,
54% yield) with a purity of 55% as determined by the hydroxylamine method
(the potassium salt of penicillin G being used as a standard).
The infrared spectrum of this substance showed the presence of an azido
group and a beta-lactam system. The substance inhibited the growth of
Staph. aureus Oxford at a concentration of 0.25 mcg/ml.
Example 2: α-Azidobenzylpenicillin via the Acid Chloride - 6-aminopenicillanic
acid (18.5 grams, 0.085 mol) and sodium bicarbonate (21 grams, 0.025 mol)
were dissolved in 200 ml of water and 100 ml of acetone. To this solution,
chilled in ice, was added α-azidophenylacetyl chloride (16.6 grams, 0.085
mol), diluted with 10 ml of dry acetone. The temperature is held at 0° to 5°C
and the reaction mixture was stirred for 2? hours.
The resulting solution was treated as described in Example 1 to give the
potassium salt of α-azidobenzylpenicillin as a white powder (29.4 grams, 84%
yield) with a purity of 83% as determined by the hydroxylamine method (the
potassium salt of penicillin G being used as a standard).
The product showed the same properties as the product obtained in Example
1,. it inhibits the growth of Staph. aureus Oxford at a concentration of 0.13
mcg/ml.
The α-azidophenylacetyl chloride was prepared by treating α-azidophenylacetic
acid with thionylchloride in portions at room temperature and then heating the
solution under reflux for one hour. The α-azidophenylacetyl chloride distils at
115°C under a pressure of 10 mm Hg.
Therapeutic Function
Antibacterial
Check Digit Verification of cas no
The CAS Registry Mumber 17243-38-8 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 1,7,2,4 and 3 respectively; the second part has 2 digits, 3 and 8 respectively.
Calculate Digit Verification of CAS Registry Number 17243-38:
(7*1)+(6*7)+(5*2)+(4*4)+(3*3)+(2*3)+(1*8)=98
98 % 10 = 8
So 17243-38-8 is a valid CAS Registry Number.
InChI:InChI=1/C16H17N5O4S/c1-16(2)11(15(24)25)21-13(23)10(14(21)26-16)18-12(22)9(19-20-17)8-6-4-3-5-7-8/h3-7,9-11,14H,1-2H3,(H,18,22)(H,24,25)/t9-,10-,11+,14-/m1/s1