18484-03-2

Upstream product

• 110-87-2 3,4-dihydro-2H-pyran 
• 873-76-7 para-Chlorobenzyl alcohol 
• 69161-61-1 2-(prop-2-en-1-yloxy)oxane 
• 14856-74-7 4-chlorobenzyltrimethylsilyl ether 

Downstream Products

• 5406-33-7 4-chlorobenzyl acetate 
• 104-88-1 4-chlorobenzaldehyde 
• 2082-64-6 4-chlorobenzyl thiocyanate 
• 20306-31-4 4-chlorobenzyl formate 
• 13940-94-8 (4-chlorophenyl)dichloromethane 
• 3848-36-0 4-chlorobenzaldoxime 
• 873-76-7 para-Chlorobenzyl alcohol 

Relevant academic research and scientific papers

Solvent-free tetrahydropyranylation (THP) of alcohols and phenols and their regeneration by catalytic aluminum chloride hexahydrate

A catalytic amount of aluminum chloride hexahydrate enables solvent-free tetrahydropyranylation (THP) of alcohols and phenols at moderate temperatures. A simple addition of methanol helps to regenerate the corresponding alcohols and phenols, thus rendering these protection and deprotection sequences as very efficient transformations at high substrate to catalyst ratios.

Copper-Catalyzed Oxidative Acetalization of Boronic Esters: An Umpolung Strategy for Cyclic Acetal Synthesis

A protocol for the acetalization of boronic esters is described. The reaction is catalyzed by copper, and the conditions proved to be mild and were amenable to a variety of functional groups. We expanded the Chan-Lam coupling to include C(sp3) nucleophiles and converted them into corresponding acetals. This method allows for the orthogonal acetalization of substrates with reactive, acid-sensitive functional groups.

Highly selective tetrahydropyranylation/dehydropyranylation of alcohols and phenols using porous phenolsulfonic acid-formaldehyde resin catalyst under solvent-free condition

An efficient protocol for solvent-free chemoselective tetrahydropyranylation/depyranylation of alcohols and phenols is reported herein using mesoporous Phenolsulfonic Acid Formaldehyde Resins as a heterogeneous acid catalyst. The catalyst successfully performed chemoselective protection and deprotection reactions of a wide range of substrates ranging from primary to secondary and tertiary alcohols and also phenols. The reactions were carried out at ambient temperature under solvent-free condition (SolFC) which resulted in high yields within a very short time. FT-IR, TEM, SEM, EDS and TG-DSC analysis techniques were employed to characterize the synthesized polymeric catalyst. The chemoselective nature of our method was confirmed using 13C DEPT-135 NMR studies. The polymer catalyst was found to be recoverable even after 10th catalytic cycle without much depreciation in its activity. The heterogeneity of the catalyst was verified by hot filtration method. Good yield, energy and cost- effective method, solvent-free protocol, mild reaction conditions, no inert atmosphere, metal-free heterogeneous polymer catalyst and excellent recoverability of the catalyst are notable milestones of the reported protocol.

Heterogeneous acidic catalysts for the tetrahydropyranylation of alcohols and phenols in green ethereal solvents

The application of heterogeneous catalysis and green solvents to the set up of widely employed reactions is a challenge in contemporary organic chemistry. We applied such an approach to the synthesis and further conversion of tetrahydropyranyl ethers, an important class of compounds widely employed in multistep syntheses. Several alcohols and phenols were almost quantitatively converted into the corresponding tetrahydropyranyl ethers in cyclopentyl methyl ether or 2-methyltetrahydrofuran employing NH4HSO4 supported on SiO2 as a recyclable acidic catalyst. Easy work up of the reaction mixtures and the versatility of the solvents allowed further conversion of the reaction products under one-pot reaction conditions.

Magnetic Fe3O4@silica sulfuric acid nanoparticles promoted regioselective protection/deprotection of alcohols with dihydropyran under solvent-free conditions

Protection (and deprotection) of hydroxyl groups via tetrahydropyranylation was carried out effectively using a catalytic amount of Fe3O4 supported silica sulphuric acid nanoparticles (Fe3O4@SiO2@SO3H) under solvent-free conditions. The synthesized nanocatalyst was characterized by XRD, TEM, FT-IR etc. A wide range of tetrahydropyranylated alcohol derivatives were synthesized using this heterogeneous magnetic nanocatalyst within 10-20 min with high yields. In addition, tetrahydropyranyl ethers could also be deprotected to the parent alcoholic compounds in the presence of MeOH using the same catalyst. After completion of the reactions, the catalyst was easily separated from the reaction medium using an external magnet, which ameliorated the overall synthetic process. The catalyst was recovered and reused for five successive reactions without any appreciable loss in its activity. Mild reactions conditions, operational simplicity, solvent free conditions, high selectivity, easy recyclability of the magnetic nanocatalyst, and high yields can be considered as the advantageous features of our procedure.

Tetrahydropyranylation of alcohols and phenols catalyzed by a new multi-wall carbon nanotubes-bound tin(IV) porphyrin

Abstract: In the present study, tetrahydropyranylation of alcohols and phenols with 3,4-dihydro-2H-pyran (DHP) using tetrakis(p-aminophenyl)porphyrinatotin(IV) trifluoromethanesulfonate, [SnIV(TNH2PP)(OTf)2], and tetrakis(p-aminophenyl)porphyrinatotin(IV) tetrafluoroborate, [SnIV(TNH2PP)(BF4)2], supported on multi-wall carbon nanotubes as new catalytic systems is investigated. These new catalysts, [SnIV(TNH2PP)(OTf)2@MWCNT] and [SnIV(TNH2PP)(BF4)2@MWCNT], were characterized using elemental analysis, FT-IR spectroscopic techniques, scanning electron microscopy and diffuse reflectance UV–Vis spectroscopic methods. In these catalytic systems, an optimization on the amounts of catalysts and amount of DHP was done in the tetrahydropyranylation of alcohols and phenols with DHP and the best outcomes were received in the presence of 0.01?mmol (40?mg) of [SnIV(TNH2PP)(OTf)2@MWCNT] and [SnIV(TNH2PP)(BF4)2@MWCNT] with 2?mmol of DHP. Efficiency and reusability are two important features of these new heterogenized catalysts for tetrahydropyranylation of primary, secondary and tertiary alcohols as well as phenols at room temperature. These catalysts were recovered several times with no loss on their initial activity, which indicates their high reusability and stability. Graphical Abstract: In the present study, tetrahydropyranylation of alcohols and phenols with 3,4-dihydro-2H-pyran (DHP) using tetrakis(p-aminophenyl)porphyrinatotin(IV) trifluoromethanesulfonate, [SnIV(TNH2PP)(OTf)2], and tetrakis(p-aminophenyl)porphyrinatotin(IV) tetrafluoroborate, [SnIV(TNH2PP)(BF4)2], supported on multi-wall carbon nanotubes as new catalytic systems is investigated. These new catalysts, [SnIV(TNH2PP)(OTf)2@MWCNT] and [SnIV(TNH2PP)(BF4)2@MWCNT], were characterized using elemental analysis, FT-IR spectroscopic techniques, scanning electron microscopy and diffuse reflectance UV–Vis spectroscopic methods. In these catalytic systems, an optimization on the amounts of catalysts and amount of DHP was done in the tetrahydropyranylation of alcohols and phenols with DHP and the best outcomes were received in the presence of 0.01?mmol (40?mg) of [SnIV(TNH2PP)(OTf)2@MWCNT] and [SnIV(TNH2PP)(BF4)2@MWCNT] with 2?mmol of DHP. Efficiency and reusability are two important features of these new heterogenized catalysts for tetrahydropyranylation of primary, secondary and tertiary alcohols as well as phenols at room temperature. These catalysts were recovered several times with no loss on their initial activity, which indicates their high reusability and stability. [Figure not available: see fulltext.].

P4VPy–CuO nanoparticles as a novel and reusable catalyst: application at the protection of alcohols, phenols and amines

P4VPy–CuO nanoparticles were synthesized using ultrasound irradiations. Relevant properties of the synthesized nanoparticles were investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy. After identification, the prepared reagent was used for the promotion of different types of protection reactions of alcohols, phenols and amines. Easy workup, short reaction times, excellent yields, relatively low cost and reusability of the catalyst are the striking features of the reported methods.

Selective tetrahydropyranylation of alcohols and phenols using titanium(IV) salophen trifluoromethanesulfonate as an efficient catalyst

Titanium(IV) salophen trifluoromethanesulfonate, [TiIV(salophen)(OSO2CF3)2], as a catalyst enables selective tetrahydropyranylation of alcohols and phenols with 3,4-dihydro-2H-pyran. Using this catalytic system, primary, secondary and tertiary alcohols, as well as phenols, were converted to their corresponding tetrahydropyranyl ethers in high yields and short reaction times at room temperature. Investigation of the chemoselectivity of this method showed discrimination between the activity of primary alcohols in the presence of secondary and tertiary alcohols and phenols. This heterogenized catalyst could be reused several times without loss of its catalytic activity. Copyright

An efficient Br?nsted–Lewis acidic ionic liquid catalyzed tetrahydropyranylation of alcohols

An imidazolium based Br?nsted–Lewis acidic ionic liquid has been shown to be an excellent catalyst and reaction medium for the tetrahydropyranylation of various alcohols in good to excellent yields with short reaction times. Selective protection of benzyl