232923-59-0

Upstream product

• 57605-95-5 1-(1-naphthyl)ethanol 
• 97-72-3 2-Methylpropionic anhydride 
• 24425-00-1 diisopropyl pyrocarbonate 
• 30070-63-4 meta-chlorobenzoic anhydride 
• 1468-39-9 Isovaleric anhydride 

Downstream Products

• 42177-25-3 (R)-1-(naphth-1-yl)ethanol 

Relevant academic research and scientific papers

PQXdpap: Helical Poly(quinoxaline-2,3-diyl)s Bearing 4-(Dipropylamino)pyridin-3-yl Pendants as Chirality-Switchable Nucleophilic Catalysts for the Kinetic Resolution of Secondary Alcohols

Helically chiral poly(quinoxaline-2,3-diyl)s bearing 4-(dipropylamino)pyridin-3-yl pendants at the 5-position of the quinoxaline ring (PQXdpap) exhibited high catalytic activities and moderate to high selectivities (up to s = 87) in the acylative kinetic resolution of secondary alcohols. The solvent-dependent helical chirality switching of PQXdpap between pure toluene and a 1:1 mixture of toluene and 1,1,2-trichloroethane enabled the preparation of either compound of a pair of enantiomerically pure alcohols (>99% ee) from a single catalyst.

Axial chirality in biaryl N,N-dialkylaminopyridine derivatives bearing an internal carboxy group

Axial chirality in N,N-dimethylaminopyridines as well as N,N-dipropylaminopyridines bearing an internal carboxy group were evaluated based on their racemization barriers and circular dichroism spectra. The half-life of racemization of N,N-dipropylaminopyridine derivative 2 was estimated to be 19.7 days at 20°C. Its enantiomers isolated as optically active forms showed positive-negative and negative-positive Cotton effects for (+)-2 and (?)-2, respectively, from 310 to 210 nm. Furthermore, (?)-2 was applied as a chiral nucleophilic catalyst and exhibited asymmetric induction in acylative kinetic resolution of 1-(1-naphthyl)ethane-1-ol.

Acylative Kinetic Resolution of Alcohols Using a Recyclable Polymer-Supported Isothiourea Catalyst in Batch and Flow

A polystyrene-supported isothiourea catalyst, based on the homogeneous catalyst HyperBTM, has been prepared and used for the acylative kinetic resolution of secondary alcohols. A wide range of alcohols, including benzylic, allylic, and propargylic alcohols, cycloalkanol derivatives, and a 1,2-diol, has been resolved using either propionic or isobutyric anhydride with good to excellent selectivity factors obtained (28 examples, s values up to 600). The catalyst can be recovered and reused by a simple filtration and washing sequence, with no special precautions needed. The recyclability of the catalyst was demonstrated (15 cycles) with no significant loss in either activity or selectivity. The recyclable catalyst was also used for the sequential resolution of 10 different alcohols using different anhydrides with no cross-contamination between cycles. Finally, successful application in a continuous flow process demonstrated the first example of an immobilized Lewis base catalyst used for the kinetic resolution of alcohols in flow.

Kinetic resolution of secondary carbinols by a chiral N,N-4-dimethylaminopyridine derivative containing a 1,1′-binaphthyl unit: Hydrogen bonding affects catalytic activity and enantioselectivity

We developed an acylative kinetic resolution of secondary carbinols using a binaphthyl-based N,N-4-dimethylaminopyridine (DMAP) derivative 1d with tert-Alcohol substituents. The reaction proceeded with a wide range of carbinols with moderate to high selectivity (s) (up to s = 79.5). Kinetic studies revealed that catalyst 1d was more catalytically active than the corresponding bis-methyl ether 1d′ or DMAP. Hydrogen bonding between tert-Alcohols of the catalyst and secondary carbinols was responsible for the enhanced reaction rate and high enantioselectivity.

Fluxionally chiral DMAP catalysts: Kinetic resolution of axially chiral biaryl compounds

Can organocatalysts that incorporate fluxional groups provide enhanced selectivity in asymmetric transformations? To address this issue, we have designed chiral 4-dimethylaminopyridine (DMAP) catalysts with fluxional chirality. These catalysts were found

A cyclochiral conformational motif constructed using a robust hydrogen-bonding network

A novel conformational motif constructed with a robust intramolecular hydrogen-bonding (H-bonding) network was discovered. A pyrrolidine derivative possessing four identical amide substituents at C(2) and C(5) formed a strong intramolecular H-bonding network consisting of all the amide groups. This conformation yielded a cyclochiral structure with a handedness that depended on the directionality of the H-bonding network. The most stable compound was isolated and applied to the acylative kinetic resolution of secondary alcohol. The handedness of the H-bonding network was biased by the presence of chiral substituents, and the preferred direction could be switched under an external stimulus. A structural analysis using NMR, X-ray crystallography, and theoretical calculation techniques indicated that the conformation of the substituents was highly ordered and depended on the directionality of the H-bonding network.

Point-to-helical chirality transfer for a scalable and resolution-free synthesis of a helicenoidal DMAP organocatalyst

The synthesis of a second-generation [6]-helicenoidal DMAP organocatalyst is reported. The synthesis is reliant upon a highly diastereoselective Rh-catalysed [2 + 2 + 2] triyne cycloisomerization, using an existing stereocentre to control the sense of forming helicity. Taken together, a scalable (>1 g), resolution-free entry to a helical DMAP with the capacity for subsequent functionalization, has been achieved.

Theoretical prediction of selectivity in kinetic resolution of secondary alcohols catalyzed by chiral DMAP derivatives

The mechanism of esterification of the secondary alcohol 1-(1-naphthyl)ethanol 9 by isobutyric anhydride catalyzed by 4-pyrrolidinopyridine (PPY, 11) and a series of single enantiomer atropisomeric 4-dialkylaminopyridines 8a-g has been studied computationally at the B3LYP/6-311+G(d,p)//B3LYP/6-31G(d) level. Comparison of the levels of enantioselectivity predicted computationally with the results obtained experimentally allowed the method to be validated. The value of the approach is demonstrated by the successful prediction that a structural modification of an aryl group within the catalyst from phenyl to 3,5-dimethylphenyl would lead to improved levels of selectivity in this type of kinetic resolution (KR) reaction, as was subsequently verified following synthesis and evaluation of this catalyst (8d). Experimentally, the selectivity of this type of KR is found to exhibit a significant deuterium isotope effect (for 9 vs d1-9).

Design, synthesis, and evaluation of a helicenoidal DMAP lewis base catalyst

The design, synthesis, and study of a helical dialkylaminopyridine Lewis base catalyst is reported. Helical DMAP analogue 4 is based upon a helicenoid structure and displays good to excellent levels of selectivity (S ≤ 116) in the kinetic resolution of chiral secondary alcohols. Catalyst 4 displays excellent reactivity with exceptionally low loadings of 0.05 mol % effecting practical levels of selectivity in kinetic resolutions.(Figure Presented)

Catalytic parallel kinetic resolution under homogeneous conditions

(Figure Presented) Two complementary chiral catalysts, the phosphine 8d and the DMAP-derived ent-23b, are used simultaneously to selectively activate a mixture of two different achiral anhydrides as acyl donors under homogeneous conditions. The resulting activated intermediates 25 and 26 react with the racemic benzylic alcohol 5 to form enantioenriched esters (R)-24 and (S)-17 by fully catalytic parallel kinetic resolution (PKR). The aroyl ester (R)-24 is obtained with near-ideal enantioselectivity for the PKR process, but (S)-17 is contaminated by ca. 8% of the minor enantiomer (R)-17 resulting from a second pathway via formation of mixed anhydride 27 and its activation by 8d.