28025-23-2

Usage

InChI:InChI=1/C7H14O3/c1-3-4-10-6-7(8)5-9-2/h3,7-8H,1,4-6H2,2H3

Upstream product

• 106-92-3 Allyl glycidyl ether 
• 67-56-1 methanol 
• 6790-38-1 1,2-epoxy-3-vinylpropane 

Relevant academic research and scientific papers

Dodecatungstocobaltate heteropolyanion encapsulation into MIL-101(Cr) metal–organic framework scaffold provides a highly efficient heterogeneous catalyst for methanolysis of epoxides

A heterogeneous catalyst was synthesized by encapsulation of a Keggin-type heteropolytungstate, potassium dodecatungstocobaltate trihydrate, K5[CoW12O40]·(Co-POM), into chromium(III) terephthalate (MIL-101). Encapsulation was achieved via a ‘build bottle around ship’ strategy in aqueous media, following a hydrothermal method. The structure of the resulting crystalline solid was characterized using X-ray diffraction, correlated with Fourier transform infrared and UV–visible spectroscopy. The metal content was analysed using optical emission spectroscopy. Transmission electron microscopy was used to measure particle size and N2 adsorption in a Brunauer–Emmett–Teller instrument to characterize the specific surface area. The catalytic activity was investigated using methanolysis of epoxides under mild conditions as a test reaction. The turnover frequency of the heterogeneous Co-POM@MIL-101 catalyst was more than 20 times higher than that of the homogeneous Co-POM catalyst. The Co-POM@MIL-101 catalyst was reused several times with negligible leaching of Co-POM and with no considerable loss of its initial efficiency. The simplicity of preparation, extraordinary stability and high reactivity make Co-POM@MIL-101 an exceptional catalytic matrix that is easily separable from reaction media.

Ru(III) complex anchored onto amino-functionalized MIL-101(Cr) framework via post-synthetic modification: an efficient heterogeneous catalyst for ring opening of epoxides

In this work, the metallo Schiff base-functionalized metal–organic framework was prepared by post-synthetic method and used as an electron-deficient catalyst for the alcoholysis of epoxides. In this manner, the aminated MIL-101 was modified with 2-pyridine carboxaldehyde and then the prepared Schiff base reacted with RuCl3. This new catalyst, MIL-101–NH2–PC–Ru, was characterized by Fourier transform infrared, UV–Vis spectroscopic techniques, X-ray diffraction, BET, inductively coupled plasma atomic emission spectroscopy and field-emission scanning electron microscopy. In the presence of this heterogeneous catalyst, ring opening of epoxides was performed under mild condition to show the significant ability and successful applications of Lewis acid containing catalysts in corporation with metal–organic frameworks. The reusability of the catalyst was also investigated. No noticeable decrease in the catalytic activity was found after four consecutive times.

An Fe3O4 nanoparticle-supported Mn (II)-azo Schiff complex acts as a heterogeneous catalyst in alcoholysis of epoxides

In this paper, an azo-containing Schiff base complex of manganese [Mn2+-azo ligand@APTES-SiO2@Fe3O4] immobilized on chemically modified Fe3O4 nanoparticles has been used as a magnetically retrievable catalyst for the alcoholysis of different epoxides to their corresponding alkoxy alcohols with methanol, ethanol and n-propanol. The newly magnetic nanoparticles (MNPs) were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and vibrating sample magnetometry (VSM).

Zirconium triflate grafted on SBA-15 as a highly efficient solid acid catalyst for ring opening of epoxides by amines and alcohols

Metal (Al, Ti, Zr) triflate grafted mesoporous SBA-15 (AlTf/S, TiTf/S, ZrTf/S) samples were synthesized as inexpensive solid acid materials by a simple one-pot-two-step synthesis methodology. These materials were characterized by X-ray diffraction, N2-sorption, thermogravimetric analysis, Fourier transform infrared spectroscopy (FT-IR), in-situ pyridine FT-IR spectroscopy, and elemental analysis. ZrTf/S was found to be a highly efficient and reusable solid acid catalyst for ring opening of epoxides with amines and alcohols and produced β-amino alcohols and β-alkoxy alcohols respectively under ambient reaction conditions. The ZrTf/S catalyst showed the highest activity, which was attributed to its high acidity compared with that of the Ti and Al containing samples.

A highly efficient protocol for regioselective ring-opening of epoxides with alcohols, water, acetic acid, and acetic anhydride catalyzed by SbF3

SbF3as an efficient catalyst has been used for regioselective alcoholysis, acetolysis and hydrolysis of epoxides to the corresponding β-alkoxy, β-acetoxy alcohols, and 1,2-diols in high to excellent yields. This study also represents a convenient synthesis of vic-diacetates from ring-opening of epoxides with acetic anhydride.

Aniline-terephthalaldehyde resin p-toluenesulfonate (ATRT) as a highly efficient and reusable catalyst for alcoholysis, hydrolysis, and acetolysis of epoxides

Alcoholysis, hydrolysis, and acetolysis of epoxides were carried out in the presence of a catalytic amount of aniline-terephthalaldehyde resin p-toluenesulfonate (ATRT) to give the corresponding β-substituted alcohols in good yields. Alcoholysis and hydrolysis of epoxides catalyzed by ATRT proceeded faster than those by pyridinium p-toluenesulfonate (PPTS).

Graphite oxide: A simple and efficient solid acid catalyst for the ring-opening of epoxides by alcohols

A simple, efficient, and general procedure for the ring-opening of epoxides with various alcohols to give the corresponding β-alkoxy alcohols using graphite oxide (GO) as the catalyst, under very mild reaction conditions is described. The method proceeds in good to excellent yields and in short reaction times at room temperature under metal-free conditions.

Erbium(III) triflate is a highly efficient catalyst for the synthesis of β-alkoxy alcohols, 1,2-diols and β-hydroxy sulfides by ring opening of epoxides

Chemo- and stereoselectivity in the ring-opening reaction of epoxides with erbium(III) triflate are described. Epoxides can be cleaved under neutral conditions with alcohols and thiols in the presence of catalytic amounts of Lewis acid, affording the corresponding β-alkoxy alcohols and β-hydroxy sulfides in high yields. In water, epoxide ring opening occurs to produce the corresponding diols in good yields.

Ring-opening reactions of epoxides catalyzed by molybdenum(VI) dichloride dioxide

Transformation of epoxides to β-alkoxy alcohols, acetonides, and α-alkoxy ketones is achieved by using molybdenum(VI) dichloride dioxide (MoO2Cl2) as a catalyst. Alcohol, aldehyde, oxime, tosyl, and tert-butyldimethylsilyl functional groups are tolerated during the methanolysis and acetonidation of the functionalized epoxides. No polymerization product is observed with any of the epoxides. Direct conversion of epoxides devoid of sensitive functional groups into the corresponding α-methoxy ketone is achieved in a single step by using the MoO2Cl 2/Oxone system. Georg Thieme Verlag Stuttgart.

Mild and efficient ring opening of epoxides catalyzed by potassium dodecatungstocobaltate(III)

Efficient ring opening of epoxides under mild conditions is reported. Potassium dodecatungstocobaltate(III) trihydrate was used as an efficient catalyst for the alcoholysis and acetolysis of epoxides. Conversion of epoxides to thiiranes was also performed efficiently in the presence of this catalyst. Springer-Verlag 2005.