3448-32-6Relevant articles and documents
Cobalt-Catalyzed Alkoxycarbonylation of Epoxides to β-Hydroxyesters
Xu, Jian-Xing,Wu, Xiao-Feng
, p. 9907 - 9912 (2019/08/26)
Herein, we developed a new and practical catalytic system for the carbonylative synthesis of β-hydroxyesters. By using simple, cheap, and air-stable cobalt(II) bromide as the catalyst, combined with pyrazole and catalytic amount of manganese, active cobalt complex can be generated in situ and can catalyze various epoxides to give the corresponding β-hydroxyesters in moderate to excellent yields. Mechanism studies indicate that pyrazole plays a crucial role in this reaction. Moreover, with the addition of the catalytic amount of manganese, the active cobalt catalyst can be regenerated, which provides a possibility for reusing the cobalt catalyst.
The synthesis of butene glycol ethers with aluminium triflate
Terblans, Yvette M.,Huyser, Michelle,Young, Desmond A.,Green, Michael J.
, p. 859 - 866 (2007/10/03)
The use of aluminium triflate as a ring-opening catalyst for butene oxide (BuO) was evaluated in the presence of different alcohols such as methanol, ethanol, n-propanol, n-butanol, 2-propanol, 2-methyl-1-propanol, and 2-methyl-2-propanol. The reaction with methanol was studied kinetically by varying the temperature, catalyst concentration, and methanol - butene oxide molar ratio. These reactions yielded two major products (2-methoxy-1-butanol and 1-methoxy-2-butanol) in a approximate ratio of 1:1. It was noted that at low catalyst concentrations (5 ppm), low temperatures (90 °C), and a MeOH-BuO molar ratio of 8:1, the selectivity of the reaction could be kinetically manipulated to shift the product ratio towards 1-methoxy-2-butanol, the α-alkoxyalcohol. This result was confirmed by an experimental design program. Statistical calculations using the data from the experimental design identified a feasible region in which reactions with methanol could be carried out, which would lead to slightly higher selectivities to 1-methoxy-2-butanol. This region shows that the methanol - butene oxide ratio should be 8:1, the temperature between 80 and 85 °C, and the catalyst concentration between 3.9 and 5 ppm. These reaction conditions were used to carry out a test reaction with methanol and an extended series of alcohols. All the alcohols, except for 2-methyl-2-propanol, reacted with butene oxide under these conditions, with the selectivity to the α-alkoxyalcohol higher than to the β- alkoxyalcohol. To obtain a ring-opening reaction with 2-methyl-2-propanol, it was found that a higher catalyst concentration (approximately 10 ppm) and a lower alcohol - butene oxide ratio (6:1) at a temperature of 80 °C were necessary. This reaction led to a mixture of 1-tert-butoxy-2-butanol and 2-tert-butoxy-1-butanol with the selectivity to the α-alkoxyalcohol being somewhat higher because of the steric influence of the bulky tert-butoxy group.
Aluminium triflate: A remarkable Lewis acid catalyst for the ring opening of epoxides by alcohols
Bradley,Williams,Lawton, Michelle
, p. 3269 - 3272 (2007/10/03)
Al(OTf)3 was found to be an extremely effective catalyst (at ppm levels) for ring opening reactions of epoxides using a range of alcohols. The Royal Society of Chemistry 2005.
Hydroboration. 57. Hydroboration with 9-Borabicyclononane of Alkenes Containing Representative Functional Groups
Brown, Herbert C.,Chen, Jackson C.
, p. 3978 - 3988 (2007/10/02)
The hydroboration of alkenes containing representative functional groups was examined with 9-borabicyclononane (9-BBN) in order to extend the hydroboration reaction for the preparation of functionally substituted organoboranes.Terminal alkenes containing a remote functional group are hydroborated with a remarkable regioselectivity (>=98percent terminal), producing the corresponding stable organoboranes. 9-BBN hydroborates the allylic derivatives so as to place boron essentially on the terminal carbon atom (>=97percent).The directive effect is further enhanced (>=99percent) in the case of β-methylallyl derivatives.The hydroboration of crotyl derivatives attaches boron predominantly at the 2-position, followed by an elimination-rehydroboration sequence.However, crotyl alcohol can be protected against elimination as the tert-butyl or tetrahydropyranyl ethers.The hydroboration-oxidation of ethyl crotonate involves a series of elimination, hydroboration, and condensation processes.In the vinyl, crotyl, and isobutenyl systems, the mesomeric effect of the substituent favors the placement of boron at the β-position, while the inductive effect favors the α-position, with the former effect predominating in most cases.Acyclic β-substituted organoboranes undergo rapid elimination.Nonpolar solvents and lower reaction temperatures decrease the rate of elimination.However, those derived from cyclic vinyl derivatives are relatively stable under neutral conditions, undergoing facile elimination in the presence of a base.
