Welcome to LookChem.com Sign In|Join Free
  • or
Benzoic acid, 4-[(phenylamino)methyl]-, methyl ester is a chemical with a specific purpose. Lookchem provides you with multiple data and supplier information of this chemical.

39126-16-4

Post Buying Request

39126-16-4 Suppliers

Recommended suppliers

  • Product
  • FOB Price
  • Min.Order
  • Supply Ability
  • Supplier
  • Contact Supplier

39126-16-4 Usage

Check Digit Verification of cas no

The CAS Registry Mumber 39126-16-4 includes 8 digits separated into 3 groups by hyphens. The first part of the number,starting from the left, has 5 digits, 3,9,1,2 and 6 respectively; the second part has 2 digits, 1 and 6 respectively.
Calculate Digit Verification of CAS Registry Number 39126-16:
(7*3)+(6*9)+(5*1)+(4*2)+(3*6)+(2*1)+(1*6)=114
114 % 10 = 4
So 39126-16-4 is a valid CAS Registry Number.

39126-16-4Downstream Products

39126-16-4Relevant academic research and scientific papers

Synthesis ofN-aryl amines enabled by photocatalytic dehydrogenation

Kim, Jungwon,Kim, Siin,Choi, Geunho,Lee, Geun Seok,Kim, Donghyeok,Choi, Jungkweon,Ihee, Hyotcherl,Hong, Soon Hyeok

, p. 1915 - 1923 (2021/02/22)

Catalytic dehydrogenation (CD)viavisible-light photoredox catalysis provides an efficient route for the synthesis of aromatic compounds. However, access toN-aryl amines, which are widely utilized synthetic moieties,viavisible-light-induced CD remains a significant challenge, because of the difficulty in controlling the reactivity of amines under photocatalytic conditions. Here, the visible-light-induced photocatalytic synthesis ofN-aryl amines was achieved by the CD of allylic amines. The unusual strategy using C6F5I as an hydrogen-atom acceptor enables the mild and controlled CD of amines bearing various functional groups and activated C-H bonds, suppressing side-reaction of the reactiveN-aryl amine products. Thorough mechanistic studies suggest the involvement of single-electron and hydrogen-atom transfers in a well-defined order to provide a synergistic effect in the control of the reactivity. Notably, the back-electron transfer process prevents the desired product from further reacting under oxidative conditions.

Discovery of M3Antagonist-PDE4 Inhibitor Dual Pharmacology Molecules for the Treatment of Chronic Obstructive Pulmonary Disease

Armani, Elisabetta,Rizzi, Andrea,Capaldi, Carmelida,De Fanti, Renato,Delcanale, Maurizio,Villetti, Gino,Marchini, Gessica,Pisano, Anna Rita,Pitozzi, Vanessa,Pittelli, Maria Gloria,Trevisani, Marcello,Salvadori, Michela,Cenacchi, Valentina,Puccini, Paola,Amadei, Francesco,Pappani, Alice,Civelli, Maurizio,Patacchini, Riccardo,Baker-Glenn, Charles A.G.,Van De Po?l, Hervé,Blackaby, Wesley P.,Nash, Kevin,Amari, Gabriele

supporting information, p. 9100 - 9119 (2021/07/19)

In this paper, we report the discovery of dual M3 antagonist-PDE4 inhibitor (MAPI) compounds for the inhaled treatment of pulmonary diseases. The identification of dual compounds was enabled by the intuition that the fusion of a PDE4 scaffold derived from our CHF-6001 series with a muscarinic scaffold through a common linking ring could generate compounds active versus both the transmembrane M3 receptor and the intracellular PDE4 enzyme. Two chemical series characterized by two different muscarinic scaffolds were investigated. SAR optimization was aimed at obtaining M3 nanomolar affinity coupled with nanomolar PDE4 inhibition, which translated into anti-bronchospastic efficacy ex vivo (inhibition of rat trachea contraction) and into anti-inflammatory efficacy in vitro (inhibition of TNFα release). Among the best compounds, compound 92a achieved the goal of demonstrating in vivo efficacy and duration of action in both the bronchoconstriction and inflammation assays in rat after intratracheal administration.

BF3·Et2O as a metal-free catalyst for direct reductive amination of aldehydes with amines using formic acid as a reductant

Fan, Qing-Hua,Liu, Xintong,Luo, Zhenli,Pan, Yixiao,Xu, Lijin,Yang, Ji,Yao, Zhen,Zhang, Xin

supporting information, p. 5205 - 5211 (2021/07/29)

A versatile metal- and base-free direct reductive amination of aldehydes with amines using formic acid as a reductant under the catalysis of inexpensive BF3·Et2O has been developed. A wide range of primary and secondary amines and diversely substituted aldehydes are compatible with this transformation, allowing facile access to various secondary and tertiary amines in high yields with wide functional group tolerance. Moreover, the method is convenient for the late-stage functionalization of bioactive compounds and preparation of commercialized drug molecules and biologically relevant N-heterocycles. The procedure has the advantages of simple operation and workup and easy scale-up, and does not require dry conditions, an inert atmosphere or a water scavenger. Mechanistic studies reveal the involvement of imine activation by BF3and hydride transfer from formic acid.

Hydrosilylation and Mukaiyama aldol-type reaction of quinolines and hydrosilylation of imines catalyzed by a mesoionic carbene-stabilized borenium ion

Bestvater, Brian P.,Clarke, Joshua J.,Crudden, Cathleen M.,DeJesus, Joseph F.,Devaraj, Karthik,Eisenberger, Patrick,Kojima, Ryoto

supporting information, p. 6786 - 6791 (2021/08/20)

Aldimines and ketimines containing electron-donating and electron-withdrawing groups can be hydrosilylated with borenium catalysts at as low as 1 mol% catalyst loading at room temperature, providing the corresponding secondary amines in excellent yields. Reactions with 2-phenylquinoline gave the 1,4-hydrosilylquinoline product selectively which can be further functionalized in a one-pot synthesis to give unique γ-amino alcohol derivatives. Control experiments suggest that the borenium ion catalyzes both the hydrosilylation and subsequent addition to the aldehyde.

In water alkylation of amines with alcohols through a borrowing hydrogen process catalysed by ruthenium nanoparticles

Risi, Caterina,Calamante, Massimo,Cini, Elena,Faltoni, Valentina,Petricci, Elena,Rosati, Filippo,Taddei, Maurizio

supporting information, p. 327 - 331 (2020/02/13)

A simple and environmentally benign procedure for the synthesis of secondary amines in water has been developed. Combining Ru3(CO)12, tetraphenylcyclopentadienone and a small quantity of TGPS-750-M surfactant, primary and secondary alcohols were alkylated at N employing equimolar amounts of aromatic amines in water. The reaction occurs under microwave (MW) dielectric heating with high conversion and high yield. When required, the use of biomass-derived 2-MeTHF or GVL as a co-solvent is possible. Under the influence of MWs, a Ru nanoparticle-nanomicelle combination was formed acting as an effective and recyclable catalyst. This protocol was also employed for "in water" cyclisation to synthesise biologically relevant pyrrolobenzodiazepines (PBDs).

Quantitative NaH catalytic hydroboration of aldimines

An, Duk Keun,Hwang, Hyonseok,Kim, Hanbi,Lee, Ji Hye

, p. 11330 - 11335 (2020/07/15)

The catalytic hydroboration of aldimines was demonstrated, with only 3 mol% NaH required for the quantitative production of secondary amines under minimal solvent conditions. In addition, chemoselective hydroboration in the presence of other reducible functional groups was achieved. DFT calculations were then used to propose a reaction mechanism for imine hydroboration. This journal is

Selective Synthesis of Secondary Amines from Nitriles by a User-Friendly Cobalt Catalyst

Sharma, Dipesh M.,Punji, Benudhar

supporting information, p. 3930 - 3936 (2019/07/12)

Selective hydrogenation/reductive amination of nitriles to secondary amines catalyzed by an inexpensive and user-friendly cobalt complex, (Xantphos)CoCl2, is reported. The use of (Xantphos)CoCl2 and ammonia borane (NH3?BH3) combination affords the selective reduction of nitriles to symmetrical secondary amines, whereas the employment of (Xantphos)CoCl2 and dimethylamine borane (Me2NH?BH3) along with external amines produce unsymmetrical secondary amines and tertiary amines. The general applicability of this methodology is demonstrated by the synthesis of 43 symmetrical and unsymmetrical secondary and tertiary amines bearing diverse functionalities. (Figure presented.).

MOF-derived Ni?NC catalyst: Synthesis, characterization, and application in one-pot hydrogenation and reductive amination

Li, Jiayi,Wang, Bowei,Qin, Yutian,Tao, Qin,Chen, Ligong

, p. 3726 - 3734 (2019/07/22)

MOF-derived catalysts with nickel nanoparticles (NPs) uniformly embedded in nitrogen doped carbon shells were developed by pyrolysis of nickel-based metal-organic frameworks (MOFs), in which amino groups were introduced to act as the nitrogen source and possible anchoring sites for Ni NPs. The resulting materials were characterized systematically. In the architecture of the catalysts, a core-shell structure was discovered, in which Ni NPs with a diameter of 6-7 nm were surrounded by N doped graphitic layers, indicating that the introduction of amino groups into precursors is beneficial to the dispersion of NPs. One-step hydrogenation and reductive amination (OHRA) is a promising route to produce secondary amines, which avoids tedious separation of intermediates. Accordingly, we applied the prepared composites as catalysts to OHRA of benzaldehyde with nitrobenzene. Among them, the catalyst pyrolyzed at 600 °C for 1.5 h exhibited the best catalytic performance (conversion: >99%, selectivity for N-benzylaniline: 97.96%) and excellent recyclability. N-doping remarkably promotes the dispersion and stability of Ni NPs, thus improving their catalytic activity and selectivity. Furthermore, the Ni-N species as well as synergism of Ni NPs and adjacent pyridinic N may also facilitate the activation of H2. And its excellent stability and recyclability can be attributed to the core-shell structure. The achieved success in MOF-derived nanocomposites may pave the way for further industrial applications.

Unsymmetrical triazolyl-naphthyridinyl-pyridine bridged highly active copper complexes supported on reduced graphene oxide and their application in water

Hu, Wenkang,Zhang, Yilin,Zhu, Haiyan,Ye, Dongdong,Wang, Dawei

supporting information, p. 5345 - 5351 (2019/10/11)

A novel unsymmetrical triazolyl-naphthyridinyl-pyridine ligand was designed and synthesized, and employed in the synthesis of a heterogeneous copper complex on reduced graphene oxide. The resulting copper composite was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDX). This supported copper catalyst containing unsymmetrical triazolyl-naphthyridinyl-pyridine (only 0.1 mol%) showed excellent catalytic activity in water with good recyclability. Various functionalized quinoline derivatives were successfully synthesized in high yields through the green strategy in water. Other heterocyclic compounds, such as pyridine, 2-(pyridin-2-yl)quinoline, 1,8-naphthyridine, 5,6-dihydronaphtho[1,2-b][1,8]naphthyridine and 2-(pyridin-2-yl)-1,8-naphthyridine derivatives, were achieved in water with more than 80% yields. Mechanism studies revealed that this transformation occurs via dehydrogenation, condensation, and transfer hydrogenation and dehydrogenation processes which was supported by a deuterium labeling experiment.

Cobalt(II) Coordination Polymer as a Precatalyst for Selective Hydroboration of Aldehydes, Ketones, and Imines

Wu, Jing,Zeng, Haisu,Cheng, Jessica,Zheng, Shengping,Golen, James A.,Manke, David R.,Zhang, Guoqi

, p. 9442 - 9448 (2018/07/05)

Highly effective hydroboration precatalyst is developed based on a cobalt(II)-terpyridine coordination polymer (CP). The hydroboration of ketones, aldehydes, and imines with pinacolborane (HBpin) has been achieved using the recyclable CP catalyst in the presence of an air-stable activator. A wide range of substrates containing polar C=O or C=N bonds have been hydroborated selectively in excellent yields under ambient conditions.

Post a RFQ

Enter 15 to 2000 letters.Word count: 0 letters

Attach files(File Format: Jpeg, Jpg, Gif, Png, PDF, PPT, Zip, Rar,Word or Excel Maximum File Size: 3MB)

1 Customer Service

What can I do for you?
Get Best Price

Get Best Price for 39126-16-4