42463-36-5

Upstream product

• 100-68-5 methyl-phenyl-thioether 

Downstream Products

• 127025-45-0 bromomethyl phenyl sulfoxide 

Relevant academic research and scientific papers

Reductive Activation of O2 by Non-Heme Iron(II) Benzilate Complexes of N4 Ligands: Effect of Ligand Topology on the Reactivity of O2-Derived Oxidant

A series of iron(II) benzilate complexes (1-7) with general formula [(L)FeII(benzilate)]+ have been isolated and characterized to study the effect of supporting ligand (L) on the reactivity of metal-based oxidant generated in the reaction with dioxygen. Five tripodal N4 ligands (tris(2-pyridylmethyl)amine (TPA in 1), tris(6-methyl-2-pyridylmethyl)amine (6-Me3-TPA in 2), N1,N1-dimethyl-N2,N2-bis(2-pyridylmethyl)ethane-1,2-diamine (iso-BPMEN in 3), N1,N1-dimethyl-N2,N2-bis(6-methyl-2-pyridylmethyl)ethane-1,2-diamine (6-Me2-iso-BPMEN in 4), and tris(2-benzimidazolylmethyl)amine (TBimA in 7)) along with two linear tetradentate amine ligands (N1,N2-dimethyl-N1,N2-bis(2-pyridylmethyl)ethane-1,2-diamine (BPMEN in 5) and N1,N2-dimethyl-N1,N2-bis(6-methyl-2-pyridylmethyl)ethane-1,2-diamine (6-Me2-BPMEN in 6)) were employed in the study. Single-crystal X-ray structural studies reveal that each of the complex cations of 1-3 and 5 contains a mononuclear six-coordinate iron(II) center coordinated by a monoanionic benzilate, whereas complex 7 contains a mononuclear five-coordinate iron(II) center. Benzilate binds to the iron center in a monodentate fashion via one of the carboxylate oxygens in 1 and 7, but it coordinates in a bidentate chelating mode through carboxylate oxygen and neutral hydroxy oxygen in 2, 3, and 5. All of the iron(II) complexes react with dioxygen to exhibit quantitative decarboxylation of benzilic acid to benzophenone. In the decarboxylation pathway, dioxygen becomes reduced on the iron center and the resulting iron-oxygen oxidant shows versatile reactivity. The oxidants are nucleophilic in nature and oxidize sulfide to sulfoxide and sulfone. Furthermore, complexes 2 and 4-6 react with alkenes to produce cis-diols in moderate yields with the incorporation of both the oxygen atoms of dioxygen. The oxygen atoms of the nucleophilic oxidants do not exchange with water. On the basis of interception studies, nucleophilic iron(II) hydroperoxides are proposed to generate in situ in the reaction pathways. The difference in reactivity of the complexes toward external substrates could be attributed to the geometry of the O2-derived iron-oxygen oxidant. DFT calculations suggest that, among all possible geometries and spin states, high-spin side-on iron(II) hydroperoxides are energetically favorable for the complexes of 6-Me3-TPA, 6-Me2-iso-BPMEN, BPMEN, and 6-Me2-BPMEN ligands, while high spin end-on iron(II) hydroperoxides are favorable for the complexes of TPA, iso-BPMEN, and TBimA ligands.

Synthesis, characterization, and reactivity of hypochloritoiron(III) porphyrin complexes

A hypochloritoiron(III) porphyrin species has been proposed as a key intermediate in an antimicrobial defense system in neutrophils and in heme-catalyzed chlorination reactions. We report herein the preparation, spectroscopic characterization, and reactiv

Reactivity of a Cobalt(III)-Hydroperoxo Complex in Electrophilic Reactions

The reactivity of mononuclear metal-hydroperoxo adducts has fascinated researchers in many areas due to their diverse biological and catalytic processes. In this study, a mononuclear cobalt(III)-peroxo complex bearing a tetradentate macrocyclic ligand, [C

A mononuclear non-heme high-spin iron(III)-hydroperoxo complex as an active oxidant in sulfoxidation reactions

We report the first direct experimental evidence showing that a high-spin iron(III)-hydroperoxo complex bearing an N-methylated cyclam ligand can oxidize thioanisoles. DFT calculations showed that the reaction pathway involves heterolytic O-O bond cleavag

Redox Reactivity of a Mononuclear Manganese-Oxo Complex Binding Calcium Ion and Other Redox-Inactive Metal Ions

Mononuclear nonheme manganese(IV)-oxo complexes binding calcium ion and other redox-inactive metal ions, [(dpaq)MnIV(O)]+-Mn+ (1-Mn+, Mn+ = Ca2+, Mg2+, Zn2+, Lu3+

Hydrogen-atom and oxygen-atom transfer reactivities of iron(

A series of iron(ii) complexes with the general formula [FeII(L2-Qn)(L)]n+ (n = 1, L = F?, Cl?; n = 2, L = NCMe, H2O) have been isolated and characterized. The X-ray crystallographic data reveals that

Sulfoxide and Sulfone Synthesis via Electrochemical Oxidation of Sulfides

The oxidation of diaryl sulfides and aryl alkyl sulfides to the corresponding sulfoxides and sulfones under electrochemical conditions is reported. Sulfoxides are selectively obtained in good yield under a constant current of 5 mA for 10 h in DMF, while sulfones are formed as the major product under a constant current of 10 or 20 mA for 10 h in MeOH. The oxygen of both the sulfoxide and sulfone function is derived from water.

The Oxo-Wall Remains Intact: A Tetrahedrally Distorted Co(IV)-Oxo Complex

In this paper, we report the preparation, spectroscopic and theoretical characterization, and reactivity studies of a Co(IV)-oxo complex bearing an N4-macrocyclic coligand, 12-TBC (12-TBC = 1,4,7,10-tetrabenzyl-1,4,7,10-tetraazacyclododecane). On the basis of the ligand and the structure of the Co(II) precursor, [CoII(12-TBC)(CF3SO3)2], one would assume that this species corresponds to a tetragonal Co(IV)-oxo complex, but the spectroscopic data do not support this notion. Co K-edge XAS data show that the treatment of the Co(II) precursor with iodosylbenzene (PhIO) as an oxidant at -40 °C in the presence of a proton source leads to a distinct shift in the Co K-edge, in agreement with the formation of a Co(IV) intermediate. The presence of the oxo group is further demonstrated by resonance Raman (rRaman) spectroscopy. Interestingly, the EPR data of this complex show a high degree of rhombicity, indicating structural distortion. This is further supported by the EXAFS data. Using DFT calculations, a structural model is developed for this complex with a ligand-protonated structure that features a Co?O···HN hydrogen bond and a four-coordinate Co center in a seesaw-shaped coordination geometry. Magnetic circular dichroism (MCD) spectroscopy further supports this finding. The hydrogen bond leads to an interesting polarization of the Co-oxo ?-bonds, where one O(p) lone-pair is stabilized and leads to a regular Co(d) interaction, whereas the other ?-bond shows an inverted ligand field. The reactivity of this complex in hydrogen atom and oxygen atom transfer reactions is discussed as well.

Selectivity switch in the aerobic oxygenation of sulfides photocatalysed by visible-light-responsive decavanadate

Nanometre-sized metal oxides are promising species for the development of visible-light-responsive photocatalysts for the selective transformation of organic functional groups. In this article, we report that decavanadate ([V10O28]6-, V10) behaved as an efficient visible-light-responsive photocatalyst in the product-selective oxygenation of sulfides achieved using O2 (1 atm) as the green oxidant. In particular, we revealed that visible-light-responsive photocatalysis of V10 showed remarkable activity for the oxygenation of structurally diverse sulfides to form the corresponding sulfones using O2 in methyl ethyl ketone (MEK). Furthermore, by simply adding water to the reaction mixture, the product selectivity of sulfide oxygenation can be significantly switched toward the production of sulfoxides, without concomitant loss of photocatalytic activity. Based on experimental evidence, we inferred the following mechanistic steps for this photocatalytic system: the aerobic oxygenation of sulfides to form the corresponding sulfoxides initiated by a visible-light-induced photoredox reaction of V10. As for the formation of sulfones, MEK-derived peroxide species as the co-catalysts are probably involved in the oxygenation of sulfoxides to sulfones. The selectivity switch of the V10-photocatalysed reaction brought about by water addition is most likely achieved by suppressing the formation of MEK-derived peroxide species. This journal is

Nucleophilic versus Electrophilic Activation of Hydrogen Peroxide over Zr-Based Metal-Organic Frameworks

Zr-based metal-organic frameworks (Zr-MOF) UiO-66 and UiO-67 catalyze thioether oxidation in nonprotic solvents with unprecedentedly high selectivity toward corresponding sulfones (96-99% at ca. 50% sulfide conversion with only 1 equiv of H2O2). The reaction mechanism has been investigated using test substrates, kinetic, adsorption, isotopic (18O) labeling, and spectroscopic tools. The following facts point out a nucleophilic character of the peroxo species responsible for the superior formation of sulfones: (1) nucleophilic parameter XNu = 0.92 in the oxidation of thianthrene 5-oxide and its decrease upon addition of acid; (2) sulfone to sulfoxide ratio of 24 in the competitive oxidation of methyl phenyl sulfoxide and p-Br-methyl phenyl sulfide; (3) significantly lower initial rates of methyl phenyl sulfide oxidation relative to methyl phenyl sulfoxide (kS/kSO = 0.05); and (4) positive slope ρ = +0.42 of the Hammett plot for competitive oxidation of p-substituted aryl methyl sulfoxides. Nucleophilic activation of H2O2 on Zr-MOF is also manifested by their capability of catalyzing epoxidation of electron-deficient C═C bonds in α,β-unsaturated ketones accompanied by oxidation of acetonitrile solvent. Kinetic modeling on methyl phenyl sulfoxide oxidation coupled with adsorption studies supports a mechanism that involves the interaction of H2O2 with Zr sites with the formation of a nucleophilic oxidizing species and release of water followed by oxygen atom transfer from the nucleophilic oxidant to sulfoxide that competes with water for Zr sites. The nucleophilic peroxo species coexists with an electrophilic one, ZrOOH, capable of oxygen atom transfer to nucleophilic sulfides. The predominance of nucleophilic activation of H2O2 over electrophilic one is, most likely, ensured by the presence of weak basic sites in Zr-MOFs identified by FTIR spectroscopy of adsorbed CDCl3 and quantified by adsorption of isobutyric acid.