4505-38-8Relevant articles and documents
Sulfonic-functionalized MIL-101 as bifunctional catalyst for cyclohexene oxidation
Sun, Weng-Jie,Gao, En-Qing
, (2019/12/26)
Metal-organic frameworks (MOFs) are newly emerging and versatile platforms for designing catalysts, and catalytic oxidation of cyclohexene has attracted much academic and industrial attention for the versatile reactivity of the substrate and the great importance of the various oxygenated products. Here we report the bifunctional catalytic properties of a sulfonic-containing MOF, MIL-101-SO3H, for cyclohexene oxidation. The sulfonic group and the Cr(III) site acts in a complementary or collaborative way. The Cr(III) framework promotes the oxidation to 3-hydroperoxycyclohex-1-ene (perox) and 2-cyclohexen-1-one (1-one) (route A), whereas the sulfonic group in collaboration with the Cr(III) framework promotes the oxidation to diol (route B) and also enhances further conversions in route A: from perox to 1-one, to 2-cyclohexen-1,4-dione (dione) and even to benzoquinone. With the bifunctional MOF, molecular oxygen alone cannot oxidize cyclohexene but participates as oxidant cooperating with tert-butyl hydroperoxide (TBHP) to accelerate the reactions and to alter the product distribution in favor of dione.
Copper-Functionalized Metal–Organic Framework as Catalyst for Oxidant-Controlled Partial Oxidation of Cyclohexene
Chotmongkolsap, Pannapat,Bunchuay, Thanthapatra,Klysubun, Wantana,Tantirungrotechai, Jonggol
, p. 703 - 712 (2018/02/09)
Microwave irradiation is exploited for the facile, one-step functionalization of Cu(acac)2 to –NH2 pendant groups of MIL-53(Al)-NH2, a metal–organic framework material, under mild reaction conditions and a short reaction time. PXRD, XPS, XAS, and EPR spectroscopy are used to investigate the structure and chemical nature of the copper species on the framework. The copper center exists in the +2 oxidation state with a square-planar geometry and NO3 coordination environment. The copper complex is anchored to the framework by imine bond formation. This copper-functionalized MIL-53(Al)-NH2 or MIL-53[Cu] is employed in the catalytic oxidation of olefins using molecular oxygen (O2) or tert-butyl hydroperoxide (TBHP) as the oxidant. The chemoselectivities of the oxidation products depend on the type of oxidant and substrate. When O2 is used as the oxidant and isobutyraldehyde as the co-oxidant in the oxidation of cyclohexene with MIL-53[Cu], cyclohexene oxide is the major product. However, when TBHP is employed as the oxidant, 2-cyclohexen-1-one is the major product. Furthermore, the catalyst can be reused at least three times without a significant loss in activity.
Novel catalytic system: N-hydroxyphthalimide/hydrotalcite-like compounds catalysing allylic carbonylation of cyclic olefins
Zhou, Yin,Tang, Rui-Ren,Song, Dan
, p. 888 - 897 (2017/02/05)
N-hydroxyphthalimide (NHPI) combined with stable and recoverable transition metal-aluminium binary hydrotalcite-like compounds (M-Al HTLcs, M = Cu, Ni, Co) as an unprecedented catalytic system was demonstrated for the allylic carbonylation, as the model reaction, of cyclic olefins with tert-butyl hydroperoxide (TBHP), using isophorone (IP) to ketoisophorone (KIP). The results showed NHPI combined with Cu-Al HTLcs to be an efficient catalytic system and the influences of various reaction conditions of the catalytic reaction were optimised. A maximum IP conversion of 68.0 % with 81.8 % selectivity to KIP was afforded under the optimal reaction conditions. Experiments of repeatability and restorability showed Cu-Al HTLcs to be stable for at least five cycles without noticeable loss of catalytic activity. Expanding substrates could also be efficiently converted to the corresponding ketones under the optimised reaction conditions with appreciable yields. A plausible catalytic reaction mechanism was proposed.
Manganese(II)/Picolinic Acid Catalyst System for Epoxidation of Olefins
Moretti, Ross A.,Du Bois,Stack, T. Daniel P.
supporting information, p. 2528 - 2531 (2016/07/06)
An in situ generated catalyst system based on Mn(CF3SO3)2, picolinic acid, and peracetic acid converts an extensive scope of olefins to their epoxides at 0 °C in 5 min, with remarkable oxidant efficiency and no evidence of radical behavior. Competition experiments indicate an electrophilic active oxidant, proposed to be a high-valent Mn = O species. Ligand exploration suggests a general ligand sphere motif contributes to effective oxidation. The method is underscored by its simplicity and use of inexpensive reagents to quickly access high value-added products.
Mononuclear complexes of amide-based ligands containing appended functional groups: Role of secondary coordination spheres on catalysis
Bansal, Deepak,Kumar, Gulshan,Hundal, Geeta,Gupta, Rajeev
, p. 14865 - 14875 (2015/02/19)
Amide-based ligands H2L1, H2L2 and H2L3 containing thiazole, thiazoline and benzothiazole appended groups have been used to synthesize Zn2+ (1 and 3), Cd2+ complexes (2 and 4), and a Mn2+ complex (5). In all cases, potentially multidentate ligands create a meridional N3 coordination environment around the M(ii) ion whereas additional sites are occupied by labile nitrate ions in 1-4 and MeOH in 5. Interestingly, metal complexation caused the migration of protons from amidic N-H sites to the appended heterocyclic rings in complexes 1-4. Structural studies show that the protonated heterocyclic rings in these complexes create a hydrogen bond based cavity adjacent to the metal ion. Importantly, binding studies confirm that the substrates are bound within the complex cavity closer to the Lewis acidic metal in all complexes including the oxidation-sensitive Mn ion in complex 5. All complexes have been utilized as the reusable and heterogeneous catalysts for ring-opening reactions of assorted epoxides, cyanation reactions of various aldehydes, and epoxidation reactions of several olefins. This journal is
Vanadium phosphorus oxide modified by silver doping: A highly effective catalyst for allylic oxidation of cycloolefins
Liu, Junhua,Wang, Fang,Ma, Zhenmao,Lin, Jun,Gu, Zhenggui
experimental part, p. 103 - 107 (2012/03/09)
Allylic oxidation of cycloolefins was carried out over Ag-VPO catalyst using tert-butyl hydroperoxide (TBHP) as oxidant in argon atmosphere, under our reaction conditions, attack of the activated C-H bonds was preferred instead of the epoxidation of C=C bond and corresponding α, β-enones were obtained as the main products. It is a high yielding, safe and eco-friendly method.
Selective oxidation of cyclohexanol and 2-cyclohexen-1-ol on O/Au(111): The effect of molecular structure
Liu, Xiaoying,Friend, Cynthia M.
experimental part, p. 16552 - 16557 (2011/12/02)
We combine reactivity studies with infrared reflection absorption spectroscopy to provide molecular-scale insights into the oxidation of two cyclic alcohols, cyclohexanol and 2-cyclohexen-1-ol, by atomic oxygen adsorbed on Au(111). The two alcohols share common features in their reaction pathways: they are both activated by Bronsted acid-base reactions with adsorbed oxygen. Cyclic ketones, cyclohexanone and 2-cyclohexen-1-one, are the major products, formed from cyclohexanol and 2-cyclohexen-1-ol, respectively. These ketones also undergo secondary ring C-H bond activation. The product distributions reflect a substantial difference in the secondary reactions for these two ketones, which correlate with their gas-phase acidity. The allylic alcohol (2-cylohexen-1-ol) has a greater degree of ring C-H activation, yielding the diketone (2-cyclohexene-1,4-dione) and phenol. Our results provide clear evidence for the importance of C=C functionalities in determining the reactivity of molecules in heterogeneous oxidative transformations promoted on Au-based materials.
A new catalytic and enantioselective desymmetrization of symmetrical methylidene cycloalkene oxides
Bertozzi, Fabio,Crotti, Paolo,Macchia, Franco,Pineschi, Mauro,Arnold, Alexander,Feringa, Ben L.
, p. 933 - 936 (2007/10/03)
(equation presented) Chiral copper complexes of C2-symmetrical phosphoroamidites were found to be highly effective catalysts for both kinetic resolution and novel desymmetrization reactions of new methylidene epoxycycloalkanes.
The 1,4-cyclohexanedione-bromate-acid oscillatory system. 3. Detailed mechanism
Szalai, Istvan,Koeroes, Endre
, p. 6892 - 6897 (2007/10/03)
1,4-Cyclohexanedione (CHD) in its reaction with acidic bromate undergoes aromatization and one of the main resulting products 1,4-dihydroxybenzene (H2Q) is further oxidized and brominated to 1,4-benzoquinone and bromoorganics. The kinetics of H2Q formation, of the reaction of CHD and Br2. as well as of the reaction between H2Q and bromate ion, were followed spectrophotometrically. The latter reaction exhibited Landolt (clock)-type dynamics. On the basis of our earlier analytical and present kinetic investigations, a detailed mechanistic model has been suggested that could well simulate the temporal oscillations of the title system. H2Q plays an essential role in the mechanism and is responsible for the unusual behavior (200-300 oscillations) of this chemical oscillator. We pointed to the relation that may exist between the CHD-bromate-acid system and those reported as oscillatory Landolt-type reactions [e.g., IO3- - SO32- - Fe(CN)64-].
